LABCONCO 3970425 Purifier Filtered PCR Enclosure with UV Light Instructions

: September 9, 2024
: LABCONCO

Table of Contents

LABCONCO 3970425 Purifier Filtered PCR Enclosure with UV Light
Overview
Specifications
Features
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LABCONCO 3970425 Purifier Filtered PCR Enclosure with UV Light

Overview

Purifier Filtered PCR Enclosures direct HEPA-filtered air downward over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. These specialized vertical clean benches provide a controlled environment in which to perform polymerase chain reaction experiments. These enclosures include a variable digital timer that provides UV light exposure continuously or in user-selected increments of 5, 10, 15, 30, 60, 120 or 240 minutes to deactivate DNA and RNA contaminants. When the set time expires, the UV light automatically switches off in preparation for the next experiment.

Purifier Filtered PCR Enclosures do not provide protection to the user and should not be used in conjunction with biohazardous material, toxins or radionuclides. Purifier Filtered PCR Enclosures are available in 2, 3 and 4′ widths. Labconco also offers Purifier Horizontal Clean Benches that direct HEPA filtered air horizontally over the work area and Purifier Vertical Clean Benches that direct HEPA-filtered air down over the work area.

Specifications

Weight: 195.0 lbs
Weight metric: 88.0 kg
Dimensions: 48″ w x 28.6″ d x 36.8″ h
Electrical: 230V, 50/60 Hz, 3 A
Built-in Options: Airflow monitor, UV Light
Nominal Width: 4′
Region: International
Conformance: CE

Compliance

UL Standard 3101-1/61010-1 (115 volt models)
CAN/CSA Standard C22.2 No. 1010.1 conformity (115 volt models)
CE Conformity marking (230 volt models)

Features

Nominal downflow velocity of 45-65 fpm
Aerodynamic air foil
Supply HEPA filter, 99.99% efficient on particles 0.3 micron
ISO Class 5 air (formerly Class 100 per Federal Standard 209E)
Disposable prefilter
Variable speed built-in blower with motorized impeller and solid state control rated for 10 amps
Intrinsically-sound, negative pressure design
Minihelic pressure gauge
Air diffuser
UV-resistant, glacier white and gray, powder-coated aluminum and steel construction
UV-opaque and resistant 1/4″ thick tempered safety glass sash and sides
Fluorescent lamp
254 nm UV lamp with interlocked UV protection panel
Variable digital timer for UV exposure with eight settings in minutes of 5, 10, 15, 30, 60, 120, 240 and continuous
Blower and 3-way light (flourescent, UV and off) switches
9.4″ high sash opening
Ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20″ and has wiping seals to promote ISO Class 5 conditions
Two utility ports with iris openings and plugs
ETL Listing (115 volt, 60 Hz models)
One year warranty on parts and service

Options

Built-in Guardian Airflow Monitor that continuously monitor downflow airflow and has two LED lights to indicate when airflow is within or outside set point range.
2′, 3′ and 4′ widths
International electrical configurations

Required Accessories