PATPET BC01 Anti Barking Collars User Manual
- September 8, 2024
- PATPET
Table of Contents
- PATPET BC01 Anti Barking Collars
- Product Information
- Product Usage Instructions
- Package Contents
- overview
- How to Adjust Shock Level
- How to Install Contact Points
- Fit the Bark Collar
- How to adjust the collar
- Question & Answer
- Troubleshooting
- Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PATPET BC01 Anti Barking Collars
Product Information
- Approved for use in EU countries CE mark provided
- Website: www.electric-collars.com
- Service Center and Distribution: Reedog, sro Sedmidomky 459/8, 101 00 Prague 10
- Phone: +1 646 980 4569
- Email: info@electric-collars.eu
Product Usage Instructions
Installation
Follow the step-by-step installation guide included in the package. Make sure
to set up the device in a suitable location as per the instructions.
Operation
To operate the device, refer to the user manual for detailed instructions on
its functions and settings. Familiarize yourself with the controls before use.
Maintenance
Regularly check the device for any signs of damage or wear.
Clean it according to the maintenance guidelines provided to ensure optimal
performance.
Troubleshooting
If you encounter any issues with the device, refer to the troubleshooting
section of the manual. Contact the service center for assistance if needed.
FAQ (Frequently Asked Questions)
Q: Is the device waterproof?
A: Yes, the device is designed to be waterproof for added durability.
Package Contents
overview
Display
WARNING
Not for use with aggressive dogs. Do not use this product if your dog is prone
to aggressive behavior. Aggressive dogs can cause severe injuries to their
owners and others. If you are not sure if this product is right for your dog,
please check with your veterinarian or certified trainer.
CAUTION
- Risk of skin damage. A collar worn for too long or made too tight on the pet’s neck may cause skin damage ranging from redness to pressure ulcers. This condition is commonly known as bed sores.
- Avoid leaving the collar on the dog for more than 8 hours per day.
- When possible reposition the collar on the pet’s neck every 1-2 hours.
- Never connect a lead to the electronic collar. It will cause excessive pressure on the contacts.
- If a rash or sore is found, discontinue using the collar until the skin has healed. If the condition persists beyond 48 hours, see your veterinarian.
- This product is not a toy, please keep away from children.
- This product is only for use with healthy dogs over 6-month old.
-
Charge the Bark Collar
USB C Charging Port When charging is completed, steady green light. -
Turn On the Bark Collar
Press and hold the power button for 2 seconds to vibrate once to open the bark collar.
Note: If there is no operation button for l O seconds, the device will automatically lock, press and hold the power button for 2 secs to unlock. -
Turn Off the Bark Collar
Press and hold the power button for 2 seconds to vibrate once to turn off the bark collar. -
How to Adjust sensitivity Level
- Press the “M” key, “Dog ICON” lights up.
- Press the “+” key to increase the sensitivity level
- . Press the “” key to decrease the sensitivity level.
How to Adjust Shock Level
Press the “M” key, “SHOCK ICON” lights up, press the “+” key to increase the
shock level, and press the “” key to decrease the shock level.
Note: “1-5” means custom mode, “0” means no shock mode, “A” means automatic
mode.
How to Find the Best Level for Your Dog
Follow the steps below to find the best Level:
- Starting at Level 1 to see the reaction when the dog barks.
- Gradually increase the sensitivity and shock levels until your dog reliably responds to the shock.
- If your dog continues showing no response at Shock Level 3, check the “Fit the Bark Collar”(Page 10). If your dog has long or thick hair, installs long contact points, or dog’s hair will need to be trimmed around the contact points, If the “Contact Points” is no contact with the dog’s skin, there will be no static stimulation.
Note: If all of these steps have been taken and the dog continues showing no reaction, see the “How to Use Test Light Tool”(Page 9).
How to Install Contact Points
How to Use Test Light Tool
- Press and hold the “M” key for 3 secs to enter test mode.
- Put the test light tool vertically on the 2 contact points, making sure the metal wire has direct contact with the top of the 2 points.
- Shout “WO WO” aim to the Microphone, the device responds to the beep and vibration function. The test light will be Iii.
- After the test is completed, press and hold the “M” key for 3 seconds to exit the test mode. Note: For dog with shorter coats use the 2 contact points and install the conductive silicone caps onto the contact points to make it softer, which may be better for your dog’s skin.
For dog with thicker coats, please install contact spring sheet.
Fit the Bark Collar
The contact points must have direct contact with the dog’s neck skin. Check the tightness of the collar by inserting one finger snugly between the collar and neck.
How to adjust the collar
Question & Answer
-
Q: Is the shock safe for my pet?
A: The static electricity is safe for your pet. So please feel at ease to use the collar. But please do select the appropriate static electricity level. And do start from the lowest level and increase the level gradually unfil your dog responds. -
Q: Is the bark collar waterproof?
A: The bark collar is IPX5 rainproof, please keep the bark collar away from water. -
Q: Does growling trigger this collar?
A: Growling can trigger the collar. Please set the sensitivity level to the lowest setting and are only using the vibration, the shock setting is at “0”. -
Q: How can I get support when I have product problems?
A: Any problems with the product, please feel free to contact us at any time via service@patpet.com We will do our best to help you.
Troubleshooting
Q: My dog keeps barking and the bark collar doesn’t work.
A: Please check the power of the device is sufficient, make sure the device is
turned on, check the contact points of the collar fit the dog’s skin, and
check whether the microphone hole is blocked. If the problem is still not
solved, please feel free to contact us at any time via
service@patpet.com We will do our best to help
you.
Warranty
1-Year Warranty
The original purchaser for this unit is provided with a 1-YEAR Warranty. The
warranty begins on the date of purchase. For the first year, coverage is
provided for both parts and labor on warranty repair services. After the first
year, the Limited Lifetime Warranty covers parts only, and does not cover
labor fees and Accessories. Accessories such as straps and batteries are
covered for the first year only. All shipping fees incurred, the cost of
accessories after the first year, and labor fees associated with out of
warranty repair work are the customers responsibility.
Not Covered Under Warranty
We DO NOT offer warranty for products that have been bought secondhand or were
resold. Issues of replacement and refunds on units purchased in less than 30
days from an authorized dealer must be addressed to the dealer directly. If
the products purchased from an authorized dealer are 30 days after the date of
purchase, please send the units to us for service and repair. We DO NOT cover
the cost of repairs and replacements due to misuse by the owner or dog,
improper maintenance, and/or lost units. The warranty is void if the unit has
been altered or an unauthorized person has damaged the unit while attempting
repair work.
Procedure for Repair Work
If the unit is malfunctioning, please refer to the “Troubleshooting” (Page 13)
in the manual before sending it back for service. A copy of the sales receipt
showing the purchase date may be required before warranty work is initiated.
Please include a brief explanation outlining the problem, and include your
name, address, city/state/zip code, daytime phone number, evening phone
number, and email address.
The device has been approved for use in EU countries and is therefore provided
with the CE mark.
All necessary documentation is available on the website: www.electric-
collars.com Changes to technical parameters,
properties and printing errors reserved.
Service center and distribution
Reedog, sro
Sedmidomky 459/8 101
00 Prague 10
Phone: +1 646 980 4569
Email: info@electric-collars.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>