ASCENDO THE10 Passive On Wall Elevate Sound Instruction Manual

: September 7, 2024
: ASCENDO

Table of Contents

ASCENDO THE10 Passive On Wall Elevate Sound
FAQs
IMPORTANT SAFETY INSTRUCTIONS
PACKAGE CONTENTS
Possible speaker positions
CONNECTIONS
CARING FOR YOUR PRODUCT
SPECIFICATIONS
DIMENSIONS
CONTACT INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ASCENDO THE10 Passive On Wall Elevate Sound

FAQs

How should I clean the speakers?

Use a dry cloth to gently wipe the speakers to keep them clean.

Can I mount the speakers on the ceiling?

The recommended mounting for THE10 PASSIVE ON WALL is on the wall either horizontally or vertically.

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Clean only with a dry cloth.
Install this apparatus in accordance with the manufacturer’s instructions.
Do not install this apparatus near any heat sources such as radiators, heat registers, stoves, or other AP apparatus.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

DISPOSAL
Correct disposal of this product (Waste Electrical & Electronic Equipment) This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

RoHS

This product is RoHS compliant. This product is in compliance with Directive 2011/65/EU, and its amendments, on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

REACH

REACH (Regulation No 1907/2006) addresses the production and use of chemical substances and their potential impacts on human health and the environment. Article 33(1) of the REACH Regulation requires suppliers to inform the recipients if an article contains more than 0.1% (per weight per article) of any substance(s) on the Substances of Very High Concern (SVHC) Candidate List (‘REACH candidate list’). At the time of the release of this product, no substances of the REACH candidate list are contained in a concentration of more than 0.1% per weight in this product.

THANK YOU FOR CHOOSING ASCENDO IMMERSIVE AUDIO

For more than 25 Years, ASCENDO has been involved in music reproduction. We are confident that the AlA product you have chosen will provide every note of enjoyment that you expect. Please take a moment to register your product on our website at www.aia-cinema.com. This enables us to keep you posted on our latest advancements and helps us to better understand our customers and build products that meet their needs and expectations. All features and specifications are subject to change without notice.

PACKAGE CONTENTS

SPEAKER PLACEMENT

Positioning your loudspeakers properly is critical to achieve the sonic performance of a home theater. Please read the following section for guidance on correct and optimal placement.

LEFT, RIGHT and CENTER speakers

The THE10 PASSIVE ON WALL is a perfect choice to serve as powerful front left right and center main speakers in a shut he plated wei. Sie ether has seen des met for another same height ma simen as she sits to and in the illusion that the actors’ voices are coming directly from their on-screen images. Ideally, the speakers will be placed about 60 degrees apart from each other viewed from the listening position, so that the distance between the speakers is the same as each speaker’s distance. The recommended mounting of the THE10 PASSIVE ON WALL is horizontal or vertical because the speakers possess an avid Nordic diversion attorney If a non-perforated projection screen, LCD/plasma/
The OLED display is being used in the installation, the THE10
PASSIVE ON WALL may be used in horizontal oriental-
tion mounted directly below or above and as close as
possible to the video display.
NOTE : In such an installation scenario it is extremely important to place the center, left, and right speakers as close as possible to the same height. The center of the speaker driver in the center channel speaker should be no more than 2 feet (61cm) higher or lower than those in of the left and right speakers. This preserves the localization integrity of “sound pans” in which the sound appears to move from left to center to right. If the program material also appears to travel up and down, it can destroy the illusion of lifelike panning effects. To mitigate the height difference between the center speaker the Left and Right channel speakers should be lowered and elevated slightly depending on if the center is installed below or above the screen.

Using the speakers as surround speakers

Surround speakers should be placed on or in the side walls no closer to the screen than the first row of viewing chairs. If there are two rows of chairs, these speakers should be placed between the two rows. Surround speakers should be placed higher than the seating area. The rule of thumb is that the center of the speaker cone should have direct access to each ear with all seats occupied so that no occlusion of the direct line of sight happens between the tweeter and each ear.

Using the speakers as rear surround speakers

Rear Surround speakers should be placed on or in their walls. Rear Surround speakers should be placed higher than the seating area. The rule of thumb is that the center of the speaker cone should have direct access to each ear with all seats occupied. This is especially chal lenging with seats possessing really high back supports. Ideally no occlusion of direct line of sight happens be- tween the tweeter and each ear.

Listening distance and volume variation

Ideally, the minimum listening distance is 2 meters or 12 feet to a surround speaker. The minimum and the maximum listening distance variation should be as long as possible, i.e. minimum 2 meters, maximum 4 meters, which reduces the listening volume difference to 6dB in the worst case.

Possible speaker positions

CONNECTIONS

Speakers and electronics have corresponding (+) and (–) terminals. Most manufacturers of speakers and electronics, use red to denote the (+) terminal and black for the (–) terminal. It is important to connect both terminals identically: (+) on the speaker to (+) on the amplifier, and (–) on the speaker to (–) on the amplifier. This connection ensures, that all speakers work in unison and make a forward movement if a positive signal is applied and move backward when a negative signal is applied. It is important to connect all speakers identically: (+) on the speaker to (+) on the amplifier and (–) on the speaker to (–) on the amplifier. Wiring any one speaker “out of phase” (+ to – and – to +) to other speakers in the system results in thin sound, weak bass andpoor imaging. With the advent of multichannel surround sound systems, connecting all the speakers in your system with the correct polarity remains equally important to preserve the proper ambiance and directionality of the program material. THE10 PASSIVE ON WALL uses both (+) (+) and (-) (-) for its connection, please see the image for possible connecting options. Both (+) (+) and (-) (-) are internally connected. The (+) terminal of the dedicated amplifier channel must be connected to the (+) terminal(s) of the speaker as the (–) terminals of the amp need to be connected to the (–) terminal(s) of the speaker. In this wiring configuration, the amplifier will be presented with a nominal 8 Ohms speaker load. THE10 PASSIVE ON WALL is specifically designed for use in conjunction with low noise amplifiers where the residual noise floor of the amplifier should be below 40µV. Connect your main receiver or processor’s output to the line-level input on your amplifier.

CONNECTING THE SPEAKERS TO AMPLIFICATION

To connect THE10 PASSIVE ON WALL subwoofer to a power amplifier(s) or receiver, use a two-conductor insulated speaker wire.

Wire length recommended size.
Up to 40 ft. (12m) 14-gauge
Up to 60 ft. (20m) 12-gauge
THE10 PASSIVE ON WALL push-on Phoenix connectors can accommodate up to #12 AWG stranded wire.

CARING FOR YOUR PRODUCT

Wipe the cabinet with a clean, dry cloth to remove dust. A damp cloth may dull the cabinet’s finish. Do not use volatileliquids such as benzene, paint thinner or alcohol on the cabinet. Do not spray insecticide near the cabinet. To remove dust from the grille fabric, use a vacuum cleaner, soft brush and set to low suction. Do not wash the grille in water, as water may fade the grille’s color or make it uneven. If the surface of the woofer cone becomes dusty you can carefully sweep it clean with a soft, dry calligraphy brush or paint brush or low air pressure. Do not use a damp cloth.