Donner EC888 Compressor Pedal User Manual

Donner EC888 Compressor Pedal

Launch Date: March 1, 2016
Price: $39.99

Introduction

The Donner EC888 Compressor Pedal is a high-quality electronic tool for improving the sound of your guitar. This pedal is great for artists who want to add polish and depth to their tone because it can smooth out dynamic ranges and provide consistent sustain. The EC888 has easy-to-use controls for Sustain, Level, Attack, and Tone, so you can make exact changes to get the sound you want. Its metal case makes it long-lasting, and its small size makes it easy to attach to any pedalboard. The pedal needs a 9V DC power source, which is not included. It’s made to give you a warm, transparent compression effect. The Donner EC888, which is based on classic optical compressor units, is reliable and flexible, whether you’re playing live or recording in the studio. Its true bypass design keeps the signal intact when the pedal is not in use, so the tone stays clean and unchanged.

Specifications

• Type : Analog Compressor
• Controls : Sustain, Level, Attack, Tone
• Power Supply : 9V DC (adapter not included)
• Power Requirement : 9V DC center negative
• Current Consumption : 10mA
• Input Impedance : 1MΩ
• Output Impedance : 1kΩ
• Construction : Metal enclosure
• Dimensions : 3.7 x 1.7 x 2.8 inches (Note: there are slightly varied dimensions provided, check the actual pedal for precise fit)
• Weight : 250g (8.8 ounces)
• Color : Blue Compressor
• Signal Format : Analog
• Number of Strings : 6 (typically refers to the guitar’s string count compatible with the pedal)

Package Includes

• Donner EC888 Compressor Pedal
• User Manual
• Warranty Card

Features

• Sustain Control : This knob adjusts the amount of compression applied to your signal. Turning it up increases the sustain, allowing for longer, more sustained notes. It can be set for subtle enhancement or extreme sustain, depending on your playing style and needs.
• Level Control : This control adjusts the output volume of the pedal. It helps you balance the compressed signal with your original sound, ensuring that the effect doesn’t overpower or get lost in the mix.
• Attack Control : Adjusts how quickly the compression engages after you play a note. A fast attack setting will compress your signal quickly, catching sharp transients, while a slow attack allows more of the initial attack of the note to pass through before compression kicks in.
• Tone Control : This knob shapes the frequency response of the compressed signal. Turning it up brightens the sound, adding clarity and presence, while turning it down darkens the sound, providing a warmer, more mellow tone.
• True Bypass : When the pedal is off, true bypass ensures that your signal passes through the pedal without alteration. This maintains the integrity of your tone, with no added noise or loss of signal strength.
• LED Indicator : Shows the current status of the pedal. When the LED is illuminated, the pedal is active; when it’s off, the pedal is bypassed.
• Advanced Compressor Pedal : The EC888 is designed to smooth out dynamics between high and low frequencies while preserving the original sound quality. This provides a balanced and robust tonal output.
• Versatile Functions : Features dedicated controls for COMP (compression intensity), TONE (brightness), and LEVEL (output volume). These controls allow for extensive sound-shaping options, making the pedal suitable for various musical styles.
• Two Practical Modes : Includes a mode selector switch for NORMAL and TREBLE modes. This allows you to tailor the pedal’s effect to your playing needs, with NORMAL mode for general compression and TREBLE mode for enhanced high frequencies.
• Warm and Classical Sound : Utilizes Donner’s exclusive electronic components and circuit design to deliver a warm, smooth, and classic compression sound. This design approach ensures a dynamic response with versatile sound-shaping capabilities.
• 100% Analog Compression : The pedal is a fully analog device, providing a studio-like optical compression sound that is both warm and natural. Its simple design makes it a perfect fit for various pedalboards.

Usage

1. Setup : Connect the pedal to your guitar and amp using the input and output jacks. Power the pedal using a 9V DC adapter.
2. Adjust Settings : Use the Sustain, Level, Attack, and Tone controls to dial in your desired sound. Start with the controls set to noon and adjust from there based on your preferences.
3. Bypass/Engage : Press the footswitch to toggle the effect on and off. The LED indicator will show when the effect is active.

Care and Maintenance

• Keep Dry : Avoid exposing the pedal to moisture or extreme temperatures.
• Clean Regularly : Use a dry cloth to clean the exterior. Avoid using solvents or abrasive materials.
• Check Connections : Regularly inspect the input and output jacks for wear and ensure connections are secure.
• Power Supply : Use only the recommended 9V DC adapter to avoid damaging the pedal.

Troubleshooting

properly connected and functioning.
| Power supply issue| Test with a different 9V DC adapter to rule out adapter failure.
| Connection issue| Check and secure all input and output connections.
Sound is distorted| Incorrect power supply| Use a 9V DC adapter with center negative polarity as specified.
| Pedal settings misconfigured| Adjust the Sustain, Level, Attack, and Tone controls to desired levels.
Unresponsive controls| Internal malfunction| Try resetting the pedal by powering it off and on again.
| Loose internal connections| Open the pedal (if comfortable) and check for loose connections, or consult a technician.
Noise or hum in signal| Grounding issue| Ensure proper grounding and use a power supply with a good ground connection.
| Interference from other pedals| Isolate the pedal by removing other pedals from the chain and test.
LED indicator not working| Faulty LED or internal issue| Check if the LED is damaged; if so, consider replacing or contacting support.

Pros and Cons

Pros :

• Affordable price point.
• Versatile sound shaping capabilities.
• True bypass design for clean signal.
• Compact and durable construction.

Cons :

• Power adapter not included.
• Some users may experience slight coloration of tone.

Contact Information

For support or inquiries regarding the Donner EC888 Compressor Pedal, you can reach out to Donner:

• Website : donnermusic.com
• Email : support@donnermusic.com

Warranty

The Donner EC888 Compressor Pedal comes with a  1-year warranty  that covers defects in materials and workmanship. For warranty claims, please contact Donner’s customer support with your purchase details.

FAQs

What type of pedal is the Donner EC888?

The Donner EC888 is an analog compressor pedal designed to enhance the tonal quality of your guitar by controlling dynamics and providing sustain.

What controls are available on the Donner EC888?

The Donner EC888 features four main controls: Sustain, Level, Attack, and Tone, which allow you to shape your sound precisely.

What is the power requirement for the Donner EC888 Compressor Pedal?

The Donner EC888 requires a 9V DC power supply with center negative polarity. The power adapter is not included with the pedal.

What is the construction material of the Donner EC888?

The Donner EC888 is constructed with a durable metal enclosure, providing robustness and longevity.

How does the True Bypass feature on the Donner EC888 benefit users?

The True Bypass feature on the Donner EC888 ensures that when the pedal is turned off, your signal remains unaltered with no added noise or loss of signal strength.

What are the dimensions of the Donner EC888 Compressor Pedal?

The Donner EC888 measures approximately 3.7 x 1.7 x 2.8 inches, making it a compact addition to any pedalboard.

How does the Donner EC888 affect the sound of a guitar?

The Donner EC888 smooths out dynamics, providing consistent sustain and a polished sound, enhancing the overall tonal quality of your guitar.

What types of music is the Donner EC888 Compressor Pedal suitable for?

The Donner EC888 is versatile and suitable for various music genres, including rock, blues, country, and jazz, thanks to its adjustable controls and warm, smooth compression.

What is the current consumption of the Donner EC888?

The Donner EC888 consumes 10mA of current, making it energy-efficient and suitable for use with a standard 9V power supply.

How does the Attack control on the Donner EC888 affect the sound?

The Attack control on the Donner EC888 adjusts how quickly the compression engages after you play a note, affecting how the pedal responds to your playing dynamics.

What is the input impedance of the Donner EC888?

The input impedance of the Donner EC888 is 1MΩ, ensuring compatibility with various guitars and maintaining signal quality.

What color is the Donner EC888 Compressor Pedal?

The Donner EC888 is available in a blue color, which is both visually appealing and easily recognizable.

What does the Tone control on the Donner EC888 do?

The Tone control on the Donner EC888 shapes the frequency response of the compressed signal, allowing you to brighten or darken your sound according to your preference.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>