Sunnydaze AGR-783 2 Drawer Console Table User Guide
- September 5, 2024
- Sunnydaze
Table of Contents
AGR-783 2 Drawer Console Table
“`html
Product Specifications:
- Product Name: 2-Drawer Console Table AGR-783
- Usage: Indoor use only
- Assembling Surface: Soft, clean, flat, dry surface
- Cleaning: Regular cleaning with a microfiber cloth
Product Usage Instructions:
Assembly:
-
Inspect packaging to ensure all parts are accounted for.
-
Assemble components on a soft, clean surface to avoid
damage. -
Follow the assembly instructions in the manual.
-
Use the box carton as a protective layer during assembly to
prevent scratches.
Cleaning and Maintenance:
-
Regularly clean with a clean microfiber cloth to prevent dust
accumulation. -
Avoid using abrasive materials or cleaners that may damage the
furniture. -
Avoid contact with water or cleaners to prevent
deterioration.
Safety Precautions:
-
Do not climb, sit, or stand on the furniture.
-
Avoid allowing children to play on or inside the
furniture. -
Keep sharp objects away to prevent scratching or damage.
Frequently Asked Questions (FAQ):
Q: Can I use this product outdoors?
A: No, this product is designated for indoor use only to prevent
damage from heat and humidity exposure.
Q: How should I clean the furniture?
A: Use a clean microfiber cloth and avoid abrasive materials or
cleaners to maintain the furniture’s finish.
Q: What should I do if I encounter missing parts during
assembly?
A: Contact customer service at
833-982-1977 or email
customerservice@sunnydazedecor.com for assistance.
“`
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing
Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the
1-year warranty period. Proof of purchase, with the date of purchase as well
as photos of the merchandise defect, must be provided. Photos are used to
determine the cause of defects and for future quality control. Register your
warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by
phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
https://tiny.cc/SunnydazeContact
2-DRAWER CONSOLE TABLE
AGR-783
Review all assembly and care information before using this product. Save this
manual for future reference. Assemble components on a soft, clean surface to
avoid damaging the finish.
Inspect packaging to ensure all parts are accounted for before disposing of
packing materials.
Save the packing slip.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal
injury, property damage or loss, whether direct or indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.
G2E
12/2023
Page 1 / 8
INTRODUCTION
Read the manual carefully to ensure you fully understand all use, care,
assembly, and safety information.
Instrucciones Instructions
Read this manual carefully and follow the assembly instructions in the order
listed. Pay close attention to assembly diagrams.
Regularly clean with a clean
microfiber cloth to prevent dust accumulation.
Assemble on a soft, flat, clean, and dry surface.
Use a soft, protective barrier when assembling the furniture.
TIP: Use the box carton as a protective layer to separate and protect the
parts from scratches and other damage during assembly.
Do not paint the unit.
Do not use abrasive materials or cleaners to clean the furniture.
Indoor use only.
Do not expose the furniture to
heat or humidity.
Do not push or drag furniture as doing so may damage the unit. Only move
furniture when it is empty.
Always ask for help when moving furniture.
When cleaning nearby the furniture, do not allow contact with water or
cleaners as it may deteriorate the furniture.
Do not allow metal components to come in contact with water or cleaners as it
may cause rust and staining.
Avoid Accidents – Do not climb, sit or stand on the furniture. Do not allow
children to play on or inside the furniture.
Keep sharp objects away as they may scratch or damage the unit. Do not use the
furniture as a writing surface without a padded barrier.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal
injury, property damage or loss, whether direct or indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.
G2E
12/2023
Page 2 / 8
COMPONENTS
Inspect packaging to ensure all parts are accounted for before disposing of
packing materials.
Save the packing slip.
Seq. 01 Top
Part Name
02 Right Side Panel
03 Left Side Panel
04 Shelf
05 Shelf Apron
06 Center Panel
07 Inside Drawer Rail (L/R)
08 Outside Drawer Rail (L/R)
09 Back Panel
10 Front Crossbar
11 Drawer Face
12 Right Drawer Side
13 Left Drawer Side
14 Drawer Bottom
15 Drawer Back
Qty. 1 1 1 1 2 1 2 2 1 1 2 2 2 2 2
No.
Hardware
Qty.
A
Wood Dowel
40
B
M4.5x28mm Pan Screw 20
C
M3.5x30mm Flat Screw 8
D
M4.5x25mm Pan Screw 14
E
M4x22mm Round Washer Bolt
2
F
Handle Set
2
G
Connector
14
H
M4x40mm Flat Screw 1
Tools Required (not included) Phillips Screwdriver
Rubber Mallet
WARNING
CHOKING HAZARD — This item contains small parts that can be swallowed. Keep
children and pets away during assembly.
G2E
12/2023
Page 3 / 8
ASSEMBLY
Carefully review all steps and fully understand assembly before beginning.
IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood
or strip the screw hole, causing a weak connection and reduced stability.
STEP 1
06: 1 10: 1 07: 2 12: 2 08: 2 13: 2 09: 1 A: 28
Locate and lay out Center Panel (06), two Inside Drawer Rails (07), two
Outside Drawer Rails (08), Back Panel (09), Front Crossbar (10), two Right
Drawer Sides (12), and two Left Drawer Sides (13). Install Wood Dowels (A) for
each component as noted below: Center Panel (06), install two Wood Dowels (A).
Inside Drawer Rails (07), install two Wood Dowels (A). Outside Drawer Rails
(08) install two Wood Dowels (A). Back Panel (09), install six Wood Dowels
(A). Front Crossbar (10), install four Wood Dowels (A). Right Drawer Sides
(12), install two Wood Dowels (A). Left Drawer Sides (13), install two Wood
Dowels (A). Set components aside, label if necessary.
STEP 2
02: 1 03: 1 04: 1 A: 12 G: 14
TIP: Install connectors by gently tapping them into the designated holes using a rubber mallet.
Install one Wood Dowl (A) into Right Side Panel (02) and Left Side Panel (03),
as shown.
Ensuring the angled edge faces the inside of the panel, install two Connectors
(G) into Right Side Panel (02) and Left Side Panel (03).
Install ten Wood Dowels (A) and ten Connectors (G) into Shelf (04), as shown.
G2E
12/2023
Page 4 / 8
STEP 3
D: 6
STEP 4
B: 2 D: 2
Align two Shelf Aprons (05) with Shelf (04) and secure using six M4.5x25mm Pan
Screws (D).
STEP 5
B: 2 D: 2
Secure Back Panel (09) to Right Side Panel (02) using one M4.5mmx28mm Pan
Screw (B). Then, secure Front Crossbar (10) using one M4.5mmx28mm Pan Screw
(B).
Secure the shelf using two M4.5x25mm Pan Screws (D).
Secure Left Side Panel (03) using two M4.5mmx28mm Pan Screw (B) and two M4.5x25mm Pan Screws (D), as shown.
G2E
12/2023
Page 5 / 8
STEP 6
01: 1 B: 6
STEP 7
B: 2 D: 4 H: 1
Align one Inside Drawer Rail (07) with Center Panel (06) and secure using two
M4.5x28mm Pan Screws (B). Flip the panel over and repeat to secure the
remaining inside drawer rail. Align the center panel with Top (01) and secure
using two M4.5x28mm Screws (B).
Align the assembled frame with the top. Secure the front crossbar to the
center panel using one M4x40mm Flat Screw (H). Secure the side panels to the
top using four M4.5x25mm Pan Screws (D). Secure the back panel to the top
using two M4.5x28mm Pan Screws (B).
G2E
12/2023
Page 6 / 8
STEP 8
B: 4
STEP 9
11: 2 B: 4 14: 2 C: 8 15: 2 E: 2
F: 2
G2E
Align one Outside Drawer Rail (08) with one of the side panels and secure
using two M4.5x28mm Pan Screws (B).
Repeat to secure the remaining outside drawer rail to the opposite side panel.
Ensuring the inside grooves align, secure Right Drawer Side (12) and Left
Drawer Side (13) to Drawer Face (11) using two M4.5x28mm Pan Screws (B).
Slide Drawer Bottom (14) into the grooves, as shown.
Secure Drawer Back (15) to the drawer sides using four M3.5x30mm Flat Screws
(C).
Ensuring the handle and handle plate remain straight, install one Handle Set
(F), as shown.
12/2023
Page 7 / 8
STEP 10
Install the drawers into the table, as shown.
SAFETY STATEMENTS & WARNINGS
· For residential use only. Not for commercial or industrial use. · For indoor
use only. · Ensure fittings are tight before use. Periodically check fitting
to ensure they are tight. · Only use this unit on a flat, level surface. · Do
not sit, stand or climb on the unit. · Supervise children; never allow
children to climb or sit on this unit as it may tip over and cause serious
injury. · Do not place liquids or hot items directly on the furniture. · Never
use chemical cleaning products or polishes as they may damage the finish. · Do
not exceed the weight capacity of the furniture. · Do not overload the drawers
or shelf, as doing so may cause them to sag. · Avoid long-term exposure to
sunlight. · Avoid placing unit near heating or cooling vents as forced air is
very drying and can damage the unit. · Do not write on furniture without a
padded barrier to protect the surface.
Any modification to the product or failure to follow recommended care will
void the product warranty.
If you experience issues with assembly or the product was damaged during
shipping, please contact our customer service team directly through one of the
methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response
time.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal
injury, property damage or loss, whether direct or indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.
G2E
12/2023
Page 8 / 8