Revo SP Spinning Reel Owner’s Manual
- June 14, 2024
- REVO
Table of Contents
SPINNING REEL OWNERS MANUAL
SP Spinning Reel
Thank you for purchasing one of the world’s most advanced spinning reels. The combination of A-SYM (asymmetric) body design, lightweight materials and precision engineering makes Abu Garcia® THE choice for serious anglers around the globe. These reels are widely used by pros on the tournament circuit, guides, record seeking experts and anglers who demand the very best from their equipment. Rely on Abu Garcia® quality and dependability to keep the fun in fishing.
| | |
---|---|---|---
Bearings
6+1| Bearings
8+1| Bearings
8+1| Bearings
9 +1
Weight
10 – 7.1oz
20 – 7.5oz
30 – 7.8oz
40 – 8oz| Weight
10 – 7.1oz
20 – 7.4oz
30 – 7.8oz
40 – 8oz| Weight
7.9oz| Weight
20 – 7.3oz
30 – 7.6oz
40 – 7.8oz
Gear Ratio/IPT
6.2:1
10/30”
20/33”
30/35”
40/39”| Gear Ratio/IPT
6.2:1
10/30”
20/33”
30/35”
40/39”| Gear Ratio/IPT
4.8:1
30/25”| Gear Ratio/IPT
7.6:1
20/39”
30/43”
40/47”
Drag System
Carbon Matrix| Drag System
Carbon Matrix| Drag System
Carbon Matrix| Drag System
Carbon Matrix
Max Drag
11lbs| Max Drag
11lbs| Max Drag
11lbs| Max Drag
11lbs
Handle Knob
Co-Molded| Handle Knob
Co-Molded| Handle Knob
Co-Molded| Handle Knob
Co-Molded
Mono Capacity
10 – 6lb/110
20 – 8lb/120
30 – 8lb/175
40 – 10lb/190| Mono Capacity
10 – 6lb/110
20 – 8lb/120
30 – 8lb/175
40 – 10lb/190| Mono Capacity
30 – 8lb/175| Mono Capacity
20 – 8lb/120
30 – 8lb/175
40 – 10lb/190
Braid Capacity
10 – 6lb/150
20 – 8lb/175
30 – 10lb/180
40 – 14lb/190| Braid Capacity
10 – 6lb/150
20 – 8lb/175
30 – 10lb/180
40 – 14lb/190| Braid Capacity
30 – 10lb/180| Braid Capacity
20 – 8lb/175
30 – 10lb/180
40 – 14lb/190
3rd GENERATION
SPINNING REEL
FEATURES
The 3rd generation of Revo Spinning Reels are packed with performance driven
features, learn more about what makes these reels some of the best on the
market. Please note that these features may not be found on every model.
- A-Symmetric X-Craftic Body -This design provides a more compact and balanced body.
- V-Rotor System – The lightweight V-Rotor system allows for a more compact, weight reducing rotor design and provides ultra-low start up inertia.
- V-Spool Design – The V-Spool design provides a lightweight and more compact platform.
- Rocket Line Management System – The Rocket Line Management System provides better control monofilament, fluorocarbon and braided lines.
- Rocket Spool Lip Design – The Rocket Spool Lip Design allows for better control of the line as it leaves the spool when casting.
- Machined Aluminum Braid Ready Spool – Allows anglers to tie braid directly to the spool without any slip or need for backing.
- Slow Oscillation provides even line lay with all types of line.
- Carbon Matrix Drag – Provides smooth and consistent drag pressure across the full drag range.
- Aluminum Handle with co-molded soft touch knobs for increased grip and comfort.
- AMG 2 Gearing System – Oversized, machined gears provide unparalleled smoothness and durability.
- Stainless Steel main shaft components for improved corrosion resistance.
HOW TO FILL THE SPOOL WITH LINE
All Revo® spinning reels are designed for monofilament, braid and fluorocarbon
lines. Personal preference and fishing conditions will determine line
selection.
MONO AND FLUOROCARBON LINES
- Attach reel to rod and pass the line through the rod guides. Lift up on the bail wire to open the bail. Secure the line to the reel using the spool axle knot. Pull line tight around reel spool.
- Control the filler spool by inserting a pencil into the spool hub. While maintaining tension on the line, wind the reel handle and continue to fill with line to approximately 1/16” (1.5 mm) inside the upper lip of the reel spool. Do not overfill.
BRAIDED LINE
Revo® spinning reels have a braid ready design that allows braid to be tied
directly to the spool without the need for a monofilament backing.
Use the spool axle knot to attach the line to the spool. Before tightening the
loop, twist and pass it over the spool two additional times. Pull the loop
tight and fill the spool with line to approximately 1/16” (1.5 mm) inside the
upper lip of the reel spool (show picture). Do not overfill. Images of Revo
Spool, Axle knot on spool and spool filled with line
HANDLE ASSEMBLY
Your Revo® spinning reel can be configured for right or left handed operation. To convert, unscrew the handle by rotating it counter clockwise (right). Use a copper coin to unscrew and remove the handle knob cover on the opposite side of the reel. Insert the handle into the opposite side of the reel and rotate it clockwise (left) until it is firmly seated. Reinstall the handle knob cover on the opposite side of the reel.
DRAG ADJUSTMENT
Control the amount of drag by turning the adjustment dial on the top of the
spool. Rotate the dial clockwise (right) to increase drag or counterclockwise
(left) to decrease drag. For best results the drag should be adjusted to
approximately one-third of the breaking test of the line being used with the
exception of braided lines. This can be accomplished by tying the line to a
spring scale for precise adjustment. Make sure the reel is first mounted on a
rod and the line has been run though the rod guides before tying to the scale.
The drag should always
release before the line reaches its breaking point. Factors such as line type,
technique and fishing conditions may require different settings. Any drag
setting above half of the line strength risks line breakage. If a spring scale
is unavailable, tie the line to a secure point and engage the anti-reverse.
With the rod tip up (about a 45 degree vertical angle), apply pressure by
turning the handle. Gradually tighten the drag adjusting knob on the top of
the spool. When the line approaches its breaking point, loosen the adjustment
dial turn.
REEL FUNCTION
Basic Casting Technique – Capture the line between your forefinger and the
rod. Open the bail arm on the reel. Bring the rod backward so the tip reaches
a point above and behind the shoulder. Without stopping bring the rod back in
front of the body in a single motion. Release the line as the rod is brought
forward so that the lure is launched slightly upward and outward toward your
target.
MAINTENANCE
As with any precision product, your Revo® reel will require regular
maintenance. Gently rinse the reel with fresh water, wipe it dry and lubricate
according to the accompanying diagram. 
To keep your reel working at peak efficiency, clean and lubricate
after each use. At least once a season your reel should be disassembled for a
thorough cleaning and re-lubrication. Refer to the exploded parts view
supplied with your reel. Reel maintenance kits can be purchased at your local
tackle store and include everything you need to properly service your reel. If
you do not wish to perform this work yourself any nearby Abu Garcia® Service
Center is fully qualified to do this for you.
PRODUCT REGISTRATION
Take a few minutes to register your Abu Garcia equipment with us today. Please visit https://register.abugarcia.com/ to begin the registration process.
SCHEMATICS
To view your reel schematics please visit www.abugarcia.com/pages/abugarcia-
reel-schematics.
You may also view your reel schematics in your Product Registration
repository.
LIMITED WARRANTY
ONE YEAR LIMITED WARRANTY (FOR USA AND CANADA ONLY)
This “limited warranty” has been drafted to comply with the Magnuson-Moss
Warranty Federal Trade Commission Improvement Act which is effective for goods
manufactured on or after December 31, 1976. For the period indicated, Abu
Garcia® will, at its option, repair or replace and return the covered items
found to be defective in material or workmanship at no charge except for
shipping cost. Abu Garcia® will have no other obligation and will not be
liable for incidental or consequential damages. Abu Garcia® makes no implied
warranty of merchantability or fitness for any period beyond the stated
duration of each Limited Warranty. This Warranty does not cover damage by
addition or alteration of the product, accidental damage or loss, abuse,
failure to provide reasonable and necessary maintenance or normal expected
wear. Damage that is determined to be of this nature will be repaired at
consumer’s expense. This Warranty does not extend to products which are put to
commercial or rental use. This Warranty extends only to the original purchaser
of the reel, and does not give any rights to any other person. Some states do
not allow exclusions of incidental or consequential damages or limitations of
the duration implied warranties, so the above exclusion and limitation may not
apply to you. This Warranty gives you specific legal rights and you may have
other rights which vary from state to state. Do not send cash or checks to
cover the cost of repair for products on which the Limited Warranty period has
expired. Abu Garcia Authorized Repair Centers will notify you of the amount
due, including handling and shipping charges. Wholesalers and dealers (unless
an Abu Garcia Authorized Center) are not authorized to make in-warranty
repairs or adjustments on behalf of Abu Garcia. The terms of the Warranty
cannot be changed except in writing by an officer of Abu Garcia® . Abu Garcia®
rods or reels requiring warranty repair should NOT be returned to the store of
purchase. For information on where to send your products for service, Click
Here.