maxspect Lagoon Series Smart Aquarium LED Light User Guide

aspect Lagoon Series Smart Aquarium LED Light

Aquarium Installation

1. Cabinet

2. Door Panel

3. Display Tank

4. Sump

5. Plumbing

6. Gyre Flow Pump and Skimmer

Equipment Connection

• Tips: When the main control system fails, please first connect the return pump and Power Supply 1 to the Return Pump (Backup) and Power Supply (Backup) sockets, respectively the Power Supply 1 only powers the return pump, the other equipment stops working. In the meantime, please get in touch with a local retailer or manufacturer for after-sale service.
• Power Supply 1 only powers the Return Pump and the main control system.
• Power Supply 2 Powers the rest of the equipment.
  Scan the QR Code to download the Syna-G Cloud APP

Operation

Equipment Control

• Press buttons can switch between the two main interfaces.
• When in the main interface 1, press and hold the button for about 2s to enter the setting interface, press the again button to switch among the equipment, press the － or ＋ button to set the value, then press and hold button again for about 2s, or leave it for 30s to save the setting and.
• Protein Skimmer & Return Pump: you can set the working speed of the equipment on both the control panel and the APP.
• Refugium Light & Gyre Flow Pump： you can only turn on and off the light through the control panel, please use the APP to get full access to the equipment.

Wi-Fi Connection

1. On either of the main interfaces, press and hold all three buttons for about 3s to enter the setting interface;
2. Press － or ＋ button to switch to setting page 1(WiFi)；
3. Press and hold the button for about 2s until the WiFi indicator starts to flash, now the system is ready to be connected;
4. Open the Syna-G Cloud APP to connect the system by following the hints; *
5. Create an account and login; **
6. For the Android platform, choose the WiFi connection to which your mobile device has already connected and input the password;
7. When a fixture with the ID “AT1-A1xxxxxx” is shown on the list, it means that the fixture is connected to your mobile device successfully.
   • Make sure your mobile device is connected to a 2.4GHz or 2.4GHz & 5GHz combined network, and turn on the Bluetooth signal and GPS positioning function at the same time.
   • Select a proper territory on the right-up side of the login page while registering new account。

Turn On/Off the System

1. On either of the main interfaces, press and hold all three buttons for about 3s to enter the setting interface;
2. Press － or ＋ button to switch to setting page 2(OFF)；
3. Press and hold the button for about 2s until the display flashes three times, the system turns off and all the equipment stop working, however, the WiFi connection is still activated；
4. Press and hold all three buttons again for about 2s can turn on the system.

Restore Factory Setting

1. On either of the main interfaces, press and hold all three buttons for about 3s to enter the setting interface;
2. Press － or ＋ button to switch to setting page 3(Reset)；
3. Press and hold the button for about 2s, system is restored to factory setting after the display flashes three times.

Child Safety Lock

1. On either of the main interfaces, press and hold – & + buttons for about 2s to lock the buttons, however, you can still press the button to check out the equipment status.
2. Press and hold – & + buttons again for about 2s can unlock the buttons.

Water Exchange

1. Press and hold － & buttons for about 2s to enter water exchange mode, return pump, gyre flow pump and skimmer stop working;
2. The duration of water exchange can only be set through the APP, the equipment will not recover to its previous working status automatically after the time is up and the buzzer starts to beep;
3. Press and hold － & buttons again for about 2s can exit water exchange mode.

Feeding

1. Press and hold & ＋ buttons for about 2s to enter feeding mode, return pump keeps its working speed, skimmer, and gyre flow pump slow down to 10% working speed；
2. The duration of feeding can only be set through the APP, the equipment will recover to its previous working status after the time is up；
3. Press and hold & ＋ buttons again for about 2s can exit feeding mode.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>