ALLEGION 801-KS Local and Remote Monitor Control Station Installation Guide

801-KS Local and Remote
Monitoring and Control Station
Installation Instructions

801-KS Local and Remote Monitor Control Station

Specifications
Audible
Input Req: 10-28VDC/3-14mA
Rated: 70dB @ 2ft
Hook-Up Leads:
(4) 24 AWG – 6” long
BLK (C) – Common
RED (U) – Unsecured
RED (S) – Secure
RED (A) – Alarm
LED Indicators:
Input Req: 12-24VDC/30mA ea.
Secure – Green
Unsecured – Red
Alarm – Yellow
Keyswitch:
Contacts: 5Amp/30VDC
Wire Leads: 22AWG – 6” long
IMPORTANT NOTES
Unit must be equipped with MBS option for LEDs to work.

Description

Provides local signal to assure users that a delayed egress system is functioning (code requirement). Includes audible and visual indication of lock status and delay activation. Provides two (2) SPDT switches: one momentary, one maintained, which can be wired to release lock and/or reset alarm condition. The keyswitch requires a standard 1-1/4” mortise cylinder with a standard straight cam. Unit mounts in a standard, double-gang electrical box.

Description of Operation

The 801-KS is wired to a magnetic lock delayed egress system. The following is an operation sequence from normal (secure) condition, through an unauthorized egress attempt, to system reset:

Condition:
Door closed and secure
Unauthorized egress attempt
After 15 (or 30) second delay
System reset
Legal release| 801-KS Status
Alarm Silent – Green LED on
Alarm Sounds – Green & Yellow LED on
Alarm Sounding – Yellow & Red LED on
Alarm Silent – Green LED on
Alarm Silent – Red LED on
---|---

RISER FOR GRAPHIC REFERENCE. LOCATE ALL DEVICES PER A-E/G.C/O.R. ADDITIONAL WIRING FOR OTHER DEVICES MAY BE REQUIRED.

| NOTE:
Fire alarm connection – for direct connection, terminals 3 & 4 connect to N.C. Dry output contacts (open on alarm). Conductor count to mag changes to four (4). If power supply output is controlled by fire alarm – place jumper between 3 & 4. NOTE:
All low voltage runs – 18 GA. minimum, except as noted. Recommended 2 spares per run. All wiring to comply with all applicable national, state, and local codes.

Customer Service
1-877-671-7011
www.allegion.com/us
© Allegion 2017
Printed in U.S.A,
24481491 Rev. 11/17-d 24481491

Documents / Resources

| ALLEGION 801-KS Local and Remote Monitor Control Station [pdf] Installation Guide
801-KS Local and Remote Monitor Control Station, 801-KS, Local and Remote Monitor Control Station, Monitor Control Station, Control Station, Station
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>