ALLEGION L9000 Series Gen 2 Indicator User Guide
- June 2, 2024
- Allegion
Table of Contents
ALLEGION L9000 Series Gen 2 Indicator
USER GUIDE
L9000-Series Gen 2 Indicator
Door preparation template
Refer to Template LG1 for case and strike dimensions and if applicable
information to prepare the door for wire routing. Armor front
deadbolt, auxiliary latch and latchbolt holes shown for dimensional purposes
only. Use door edge measurements for door preparation.
Functions: L/LV9040, L/LV9044, L/LV9050,
L/LV9056, L/LV9060, L/LV9071,
L/LV9077, L/LV9440, L/LV9444,
L/LV9456, L/LV9457, L/LV9458, L9466,
L9473, L/LV9480, L/LV9485
Left Hand (LH) Door Shown
Refer to Template LG1 for case and strike dimensions and if applicable information to prepare the door for wire routing. Armor front deadbolt, auxiliary latch and latchbolt holes shown for dimensional purposes only. Use door edge measurements for door preparation.
Specifications
-
Product: L9000-Series Gen 2 Indicator
-
Models: L/LV9040, L/LV9044, L/LV9050, L/LV9056, L/LV9060,
L/LV9071, L/LV9077, L/LV9440, L/LV9444, L/LV9456, L/LV9457,
L/LV9458, L9466, L9473, L/LV9480, L/LV9485 -
Trim: Outside, Inside, Dual
-
Escutcheon: Sectional
-
Handing: Left Hand (LH)
-
Backset: 2.750 inches (70 mm)
FAQ
Q: How do I determine the correct model for my door?
A: Refer to the product manual or contact customer support for assistance in selecting the appropriate model based on your door specifications.
Q: Can this indicator be used on both left-hand and right-hand doors?
A: The product shown in the manual is designed for left-hand (LH) doors. Contact customer support for information on models suitable for right-hand doors.
Q: What should I do if the backset measurement does not match my door?
A: Contact customer support for guidance on adjusting or customizing the backset to fit your door requirements.
Dimensions shown in parentheses () are in millimeters.
Drawing not to scale.
© 2024 Allegion
LG210 Rev. 03/24
www.allegion.com/us