LinkedIn PKE Ningbo Teverun Technology User Manual

PKE Ningbo Teverun Technology

“`html

Specifications:

• Manufacturer: NINGBO TEVERUN TECHNOLOGY CO.,LTD
• Product: PKE System
• Version: 1.3

Product Usage Instructions:

1. Arm Key Function:

In the normal state, press the horn button once to sound the
horn once and simultaneously lock the motor. After 3 seconds, the
system enters the arming state.

2. Disarm Key Function:

In the arming state, press the disarm key once; the horn sounds
twice, the motor unlocks, and the arming state is deactivated.

3. Remote Start:

While in the arming or disarming state, press the mute key twice
within 2 seconds. The horn will sound a power-on prompt, and the
system will power on the ignition.

4. Induction Function:

• A. When the remote control is near the vehicle
  and there is no activity for 3 minutes, the system enters the
  silent arming state. It can be reactivated through rotation,
  vibration, or remote control disarming.

• B. In the unpowered state, with the remote
  control within 1 to 2 meters of the vehicle, the vehicle powers on
  automatically. The vehicle can be powered off using the one-key
  start button or remote disarming button.

• C. After the vehicle is powered off, if it
  needs to be powered on again, it can be done through the mechanical
  key, remote start, or by moving away and then approaching the
  vehicle.

5. Enable/Disable Anti-theft Device Induction Function:

After keyless start, within the main machine induction range,
simultaneously press and hold the remote control arming and
disarming keys for 3 seconds to enable/disable the induction
function.

6. Power-off Memory:

After a power loss and re-powering, the arming and induction
functions remain in their previous states.

7. Vibration Sensitivity Setting:

Simultaneously press and hold the arming key and mute key for 3
seconds to adjust vibration sensitivity. There are 5 levels, with
level 1 being the highest.

8. Remote Control Learning Code Setting:

After keyless start, long-press the remote control mute key for
5 seconds. Enter learning code mode by pressing any two buttons on
the remote control one after another. Exit learning code mode by
pressing the mute key and disarming key simultaneously.

Frequently Asked Questions (FAQ):

Q: How do I change the vibration sensitivity level?

A: To adjust vibration sensitivity, simultaneously press and
hold the arming key and mute key for 3 seconds to cycle through the
5 levels available.

Q: How do I enable or disable the induction function of the

anti-theft device?

A: After keyless start, within the main machine induction range,
simultaneously press and hold the remote control arming and
disarming keys for 3 seconds to toggle the induction function on or
off.

“`

NINGBO TEVERUN TECHNOLOGY CO.,LTD
PKE User Manual

version 1.3

1. Arm Key
In the normal state, press the horn button once to sound the horn once and simultaneously lock the motor. After 3 seconds, enter the arming state.

2. Arming Alarm A. In the arming state, upon detecting a vibration signal, the horn sounds for 2 seconds, simultaneously locking the motor. If there is another vibration within 15 seconds, the horn will sound continuously for 15 seconds, and the motor remains locked. B. In the arming state, gently push the vehicle continuously for 2 seconds; the horn sounds for 2 seconds, simultaneously locking the motor. If the vehicle is pushed again within 15 seconds, the horn will sound continuously for 15 seconds, and the motor remains locked. C. In the arming state, opening the mechanical lock allows direct riding of the vehicle.

D. After an alarm is triggered by vibration or motion, press the arming key alarm. The anti-theft device remains in the arming state.

once to pause the

3. Disarm Key Function
In the arming state, press the key once; the horn sounds twice, the motor unlocks, and the arming state is deactivated.

4. Remote Start

While in the arming or disarming state, press the mute key

twice within 2 seconds. The

horn sounds a power-on prompt, and the anti-theft device powers the ignition.

5. Induction Function (Ineffective when the mechanical key is in use) A. When the remote control is near the vehicle and there is no activity for 3 minutes, the anti-theft device enters the silent arming state. It can be reactivated through rotation, vibration,
or remote control disarming , returning to a 3-minute pre-activation state. B. In the unpowered state, with the remote control within 1 to 2 meters of the vehicle, the vehicle powers on automatically. The vehicle can be powered off using the one-key start button
or remote disarming button. Once the remote control is 4 to 8 meters away, the vehicle enters the automatic arming state. C. After the vehicle is powered off, if it needs to be powered on again, it can be done through the

NINGBO TEVERUN TECHNOLOGY CO.,LTD

version 1.3

mechanical key, remote start, or by moving away and then approaching the vehicle.

6. Enable/Disable Anti-theft Device Induction Function (Perform after keyless start) A. Within the main machine induction range, simultaneously press and hold the remote control
arming and disarming keys for 3 seconds. The main machine emits a “beep” prompt, and the red indicator on the remote control flashes once, indicating that the induction function is enabled.
B. Simultaneously press and hold the arming and disarming keys for 3 seconds again. The main machine emits a “beep beep beep” prompt, and the red indicator on the remote control flashes twice, indicating that the induction function is disabled. C. After the operation, press any key on the remote control twice to confirm whether the induction function is enabled. If you hear “beep beep beep” or “beep beep beep beep” prompts, no further action is needed. D. The induction function is factory-defaulted to the disabled state. Customers need to enable it themselves if they want to use the induction function.

7. Power-off Memory After the anti-theft device loses power and is re- powered, the arming and induction functions remain in the state they were in before power loss.

8. Vibration Sensitivity Setting
Simultaneously press and hold the arming key and mute key for 3 seconds. There are 5 sensitivity levels, with level 1 being the highest. The number of times the anti-theft device beeps indicates the sensitivity level. The default is level 1.

9. Remote Control Learning Code Setting After keyless start, long-press the remote control mute key

for 5 seconds. The horn sounds a

prompt, and within 3 seconds, press the arming key to enter learning code mode. Press any two buttons on the remote control one after another (ensure that the last two prompt sounds
are from pressing your own two remote control buttons). Press the mute key and disarming

key simultaneously to exit learning code mode and resume normal operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>