Holman 31571 Pro Wing Wind Deflector User Guide
- September 3, 2024
- Holman
Table of Contents
31571 Pro Wing Wind Deflector
“`html
Product Information
Specifications:
- Product Name: Pro Wing Wind Deflector (Trucks w/o Cap)
- Part Number: 31571
- Color: Black
- Compatibility: Fits standard length racks on extended cab
trucks
Product Usage Instructions:
- Installation:
To install the Pro Wing Wind Deflector, follow these steps:
1. Position the wind deflector on the front crossbar of the rack.
2. Bolt the wind deflector securely in place using the included clamping brackets.
3. Adjust the position of the wind deflector to optimally deflect wind up over the cab.
- Usage:
Ensure that the wind deflector is securely fastened to the rack.
The deflector is designed to reduce wind noise by more than half,
providing a quieter driving experience, especially for extended cab
trucks.
FAQ (Frequently Asked Questions)
Q: Can the Pro Wing Wind Deflector be used on any type of truck
rack?
A: The Pro Wing Wind Deflector is compatible with specific rack
models such as Pro II Legs & Bars and The Pro Rack Leg &
Crossbar Kit, designed for trucks without a cap. Make sure to check
compatibility before installation.
Q: How do I know if I need to retrofit this wind deflector to
my existing rack?
A: If you are experiencing excessive wind noise while driving,
especially in extended cab trucks, retrofitting this wind deflector
may help reduce noise levels significantly. Consult the user manual
for guidance.
“`
THE PRO WING WIND DEFLECTOR (TRUCKS W/O CAP) Part # : 31571
Wind Deflector Full-Size Trucks
Holman’s new patented scalloped wind deflector design is proven to cut wind
noise by more than half. The Pro Rack Leg & Bar kits include this wind
deflector, but you may need this part to retrofit to an older Pro II rack or
to replace on your Pro Rack. This wind deflector bolts to the front crossbar,
and can be positioned to optimally deflect wind up over the cab. Especially
recommended when standard length racks are mounted on extended cab trucks.
Black.
Features and Benefits:
Holman’s patented design cuts wind noise by more than half. Sturdy clamping
brackets are easy to install and securely hold the wind deflector in place.
Compatible Items:
01000 – Pro II Legs & Bars – GM, Ram 1500, Tundra, F-150 Without Cap 01040 –
Pro II Legs & Bars – F-250/350 Without Cap 12000 – The Pro Rack Leg & Crossbar
Kit – Full-Size Trucks – 24″ H Cab 12006 – The Pro Rack Leg & Crossbar Kit –
Full-Size Trucks – 22″ H Cab