SILVER STONE SOD04 Slim Slot loading DVD Rewriter Instructions

SILVER STONE SOD04 Slim Slot loading DVD Rewriter Instructions

Installation guide

Please remove the release liner on the double-sided adhesive first

Adhere the 12.7mm bezel onto existing bezel on the SOD04, be sure to line up both sides of top edges

Press the bezel with your finger from left to right several times to make sure bezel adhere securely to the trim

If the case’s optical drive slot height is 12.7mm, make sure to adhere Mylar spacer to the bottom of the drive body before installing SOD04

1. Please connect SATA connector to the SATA port on your motherboard
2. Please connect power cable connector to your power supply
3. Please connect the adapter onto optical drive

Usage of any controls, adjustment, or procedure other than those specified herein may result in hazardous radiation exposure.
Please do not disassemble this product to prevent any exposure by laser emanations which is harmful to human eyes.

Special features

Designed for the chassis requiring installation of a slim optical drive DVD / CD read and write
Slot loading design for elegant integration
Maximum 1.5 Gbits data transfer speed and stability with SATA interface
Complete retail pack includes SATA cable, screws, user manual and 12.7mm bezel

Specification

Caution:
Usage of any controls, adjustment, or procedure other than those specified herein may result in hazardous radiation exposure.
Please do not disassemble this product to prevent any exposure by laser emanations which is harmful to human eyes.

Attention:
If your case’s optical drive bezel slot is 9.5mm, please install it directly into the case.
If your case’s bezel slot is 12.7mm, please refer to the following installation guide

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: 

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Please refer to Silver Stone website for latest specifications updates.

Warranty Information

This product has a limited 1 year warranty in North America and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor

Warranty terms & conditions

1. Product component defects or damages resulted from defective production is covered under warranty.
   Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
   a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
   b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
   c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
   d) Warranty mark/stickers are not removed or broken.
   Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

3.  Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand purchaser.

5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone http://www.silverstonetek.com.
   Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
   Please visit http://www.silverstonetek.com for the latest updates.

Additional info & contacts

For North America (usasupport@silverstonetek.com)
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only (support@silverstonetek.com)
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)
For Europe (support.eu@silverstonetek.de)
For all other regions (support@silverstonetek.com)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>