alza ergo APW-EGOCC1B Office Chair Conference 1 User Manual

: June 9, 2024
: alza ergo

Table of Contents

PARTS LIST & INSTALLATION
PURPOSE AND USE
CARE AND MAINTENANCE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

APW-EGOCC1B Office Chair Conference 1
User Manual

PARTS LIST & INSTALLATION

alza ergo APW EGOCC1B Office Chair Conference - Parts
List

THANK YOU FOR CHOOSING US!
We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you choose us again the next time you make a purchase.

PURPOSE AND USE

This office chair is designed for use in homes and offices.
Attention: The positioning mechanism may only be adjusted and adjusted by qualified and properly trained personnel.
Wheels

The chair is equipped with hard wheels for soft surfaces (carpet). Soft, extra-quiet wheels for hard floor types (floating or wooden floors, tiles, marble, concrete, etc.) are available separately as an optional accessory.
Remove dirt and dust from the wheels regularly with a damp cloth to prevent minor damage to the floor (especially floating or wooden floors).

CARE AND MAINTENANCE

Recommendations for long life

We recommend that you use only high quality products designed for the type of fabric you are using. Using an unsuitable product or other chemical can seriously and irreversibly damage the surface! Always test in a less visible area before applying any product.
Regular maintenance significantly extends the life of the cover. We therefore recommend vacuuming once a week to remove dust particles. Complete cleaning should then be carried out (depending on the intensity of use) 1-2 times a year. Remove any stains immediately after they occur!
Never place newspapers, magazines or wet clothes on the chair. Textile and newspaper dyes can penetrate and discolour the surface of the fabric.
Do not expose the chair to direct sunlight or any other strong light source! This prevents the colour of the cover from changing shades.
Do not place the chair in a humid environment or too close to a radiator or other heat source. The minimum recommended distance be-tween the chair and the heat source is 30 cm.
Protect the chair from pets. Their claws, saliva and bodily secretions can irreparably damage the chair surface.

Instructions for regular maintenance

Wipe plastic surfaces with a soft, clean cloth or maintain with non-aggressive agents. We recommend cleaning and care products for vehicle interior maintenance that are suitable for plastic, rubber or other artificial surfaces.
It is recommended to regularly dust the fabric covers with a vacuum cleaner. If necessary, arrange for professional technical cleaning or clean with a suitable mild foam-based product. Apply the foam to the soiled area, leave it on and then vacuum or dry with a soft cotton cloth. The cover should not become too deeply wet during cleaning. After cleaning, allow to dry thoroughly before further use! Do not blow-dry.

WARNING! NEVER USE FOR MAINTENANCE: