GUANGZHOU SHUANG YI T11363 Bluetooth Speaker User Manual

June 13, 2024
GUANGZHOU SHUANG YI

GUANGZHOU SHUANG YI T11363 Bluetooth Speaker User Manual
GUANGZHOU SHUANG YI T11363 Bluetooth Speaker

Foreword

Thank you for purchasing and using our products. In order to let you operate this machine as quickly as possible, please read this booklet carefully before you start using it.

This machine is a stylish and portable wireless speaker. This machine supports wireless protocol. It supports smart phones, tablets, and note- books. It is a device that waits for wireless audio functions. It allows you to completely get rid of wireless shackles and enjoy music without any restrictions. It also supports TF card, U disk and Bluetooth-free mobile phone, laptop, mp3, mp4 and other audio input playback.

Precautions

  • Do not hit the main unit seriously.
  • Do not touch benzene, thinner lamp chemicals.
  • Please do not use near strong magnetic fields and electric fields.
  • Please avoid direct light spot heating appliances.
  • Do not disassemble, repair or modify it yourself.
  • Do not clean the unit with water. Use a slightly damp cloth to cut the surface of the unit.
  • When using low voltage, the sound may be distorted and please charge it in time.
    Please disconnect the power when not in use for a long time.

Power on: Press and hold the “M/” key for 3 seconds, you will hear the power on prompt sound, and enter the standby state.

Shutdown: Press and hold the “M/6” key for 3 seconds, and the machine will be turned off when you hear the shutdown prompt tone.

Mode switch: After power on, press “M/” to switch between radio mode, BT mode and input mode.

(Note: If it is not used for 15 minutes, it will automatically shut down.)

BT MODE

  1. After power on, it will automatically enter the BT mode (when the antenna is not plugged in), the blue light flashes quickly, and the BT mode is entered.
    (Note: When the antenna is plugged in, will enter input mode or FM mode, and you must press the “M/” key to switch to the BT mode to connect to the C.)

  2. Pairing: Turn on the BT of the mobile phone (or other devices), search for the “B6” BT name, and use it after the connection is successful.

  3. Support BT hands-free calling function. During a BT call, tap “II” to answer the call/hang up the call, long press to reject the call, and double click to redial the previous call.

TF card U disk mode

  1. In the boot mode, insert the TF card or U disk to automatically enter the TF card or U disk to play.
  2. During the playback, the indicator light flashes slowly, and the blue light is paused.

Audio input mode

Insert the connecting line in the power-on state, and the other end is the output of other audio equipment, and it will automatically enter the line in audio input mode.

FM mode

  1. Long press the “M/” key to switch to FM radio mode.
  2. After entering the FM radio mode, press “ ” to enter the search position. The blue indicator light flashes rapidly at this time.
  3. After the search is completed, short press the “ “key to switch the selected radio station.

Charging

  1. Plug the USB cable into the speaker to connect to the 5V charger or computer to charge the speaker’s internal battery.
  2. When charging, the “Charging” indicator lights up red, and when it is full, the red light is off.

The power-on volume of all the modes in this mode defaults to 60% of the total volume. When the battery voltage is lower than 3.2V, the speaker will automatically detect and emit a low-power alarm sound. When the battery voltage is lower than 3.0V, the speaker will sound and automatically shut down.

Easy Operation Guide

Easy Operation Guide

Back
Easy Operation Guide

NO. Button name MODE
BT TF/U-disk Line in
1 HOLD:mode switch Press:play/pause

Calling:Press:answer/hang up
Hold:refuse double-click: redial the tail number| HOLD:mode switchPress:play/pause| HOLD:mode switch Press:play/pause| HOLD:mode switch Press:Automatic search.
2| | Press>Iast| Press>Iast| | Press>last FM
3| | Press>next| Press>next| | Press>next FM

Note:
Turn the rotary button clockwise to turn it on volume.  /”+” to adjust the

Technical specifications

  1. BT version: version 5.3
  2. Output: BT TF U disk AUX output 3. Charging source interface: MIRCO interface
  3. Rated power: 30, 5W
  4. Speaker power: 5W X2
  5. Frequency response: 150Hz-20KHz
  6. Noise ratio: 80dB
  7. BT transmission distance: 10 meters or more (accessible)
  8. Power input: DC 5V, 1800 MA

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals