DL ELECTRONICS DL-GW100 Bluetooth and Wired Gaming Headseat User Manual

DL ELECTRONICS DL-GW100 Bluetooth and Wired Gaming Headseat

Product Information

Specifications:

• Model: DL-GW100
• Bluetooth Version: 5.1
• Standby Time: >200 hours
• Transmitter Range: >10m without obstacle
• Playing Time: about 10 hours
• Charging Time: about 2.5 hours
• Battery Capacity: 400mAh
• Driver Diameter: 50mm
• Speaker Impedance: 22ohm
• Frequency Response: 20Hz-20kHz
• Sensitivity: 110dB+/-3dB
• Microphone Diameter: 41.5mm for built-in Mic; 65mm for detachable Mic
• Microphone Directivity: Omnidirectional

Product Usage Instructions

Charging:

1. Connect the provided charging cable to the headset and a power source.
2. The LED indicator will show the charging status, and it takes approximately 2.5 hours to fully charge.
3. Once fully charged, disconnect the headset from the power source.

Bluetooth Pairing:

1. Ensure the headset is powered off.
2. Press and hold the Bluetooth button until the LED indicator flashes rapidly.
3. Go to your device’s Bluetooth settings, search for DL-GW100, and select it to pair.

Wired Connection:

1. Use the included audio cable to connect the headset to your device’s audio jack.
2. The headset can be used in wired mode even when the battery is low.

Microphone Usage:

1. For the detachable microphone: Connect it securely to the headset for voice chat or recording.
2. The built-in microphone can be used for hands-free calling or in-game communication.

Frequently Asked Questions (FAQ)

• Q: How do I reset the headset?
  A: To reset the headset, press and hold the Power button and Volume Up button simultaneously for 10 seconds.

• Q: Can I use the headset while charging?
  A: Yes, you can use the headset while it is charging, allowing for uninterrupted usage.

Model : DL-GW100

Parameter

• BT Version:5.1
• Standby time >200hours
• Transmitter range>10m w/o obstacle
• Playing time: about 10 hours
• Charging time: about 2.5 hours
• Battery: 400mAh
• Driver Dia.: 50mm
• Speaker Impedance:22ohm
• Frequency Response:20Hz-20kHz
• Sensitivity: 110dB+/-3dB
• Microphone Dia.:
  • 4*1.5mm for built-in Mic. ;
  • 6*5mm for detachable Mic.
• Directivity: Omnidirectional
• Impedance:<2.2Kohm
• Sensitivity:-40dB+/-3dB

Packing Details

• 1*Headset ;
• 1*user manual;
• 1* Aux cable;
• 1* detachable Mic.

Product Features

1. Dual Microphone design Detachable Mic. (whatever wireless status or wired status)
2. Built-in Microphone (It is better using it when the unit is on bluetooth status)
3. With light design& Light on/off switch

SPECIAL NOTICE:
The headset has two Microphones: a detachable one and a built-in Mic. Detachable microphones can be used on all statuses. To communicate well, we don’t suggest the use built-in microphone when working as a wired headset. if you insist on using it, you must turn on the headset. Meanwhile, it also doesn’t work because of compatibility problems.

Button indication

1. Turn on/off headset Led light on/off
2. Answering/end calling
3. Volume -/Prev.
4. Volume+/next
5. Detachable Mic. Socket
6. Charging&working indication light
7. Charging socket
8. Aux socket
9. Brand light

(When charging the headset, the light becomes red, when full charge, the light will be turned off)

BT operation indication

1. Press down button 1 for about 3 sec. until light 6 quick flash between blue&red color(when bluetooth headset is working,long-pressing it will close the headset or fast-pressing it two time quickly, the main light will be off)
2. Open the bluetooth on the end device and search the headset to match(the headset’s model is DL-GW100),if connected successfully, you can hear a voice notice from the headset and the light 6 colors will become blue and flash slowly.
3. Open your music or other sound source in the end device and enjoy them.
4. Long-pressing V- to decrease volume or long pressing V+ to increase volume; if fast press 3( V-), it will turn to previous music and if fast press 4(V+),it will turn to next music.
5. When somebody calls you or needs to end the phone, press button 2 to answer/end the phone. when you are enjoying music, press 2 to pause it or re-start music. When the headset is on standby status, fast press the button 2 two times, then re-call the latest phone.

Wired gaming headset indication

1. Turn off the power of the headset if your headset is powered on
2. Plugging the detachable cable microphone into the headset
3. plugging one tip of the adapter cable into the headset and the other end into the audio equipment. (please connect the cable as follows, if your cable is with volume control, the wrong connection may cause the unit not to work)

Warning:

1. It will damage your hearing if long-time use a headset
2. Don’t use a headset when charging it

Some other notices

1. If your device is without bluetooth function, you need an extra bluetooth USB transmitter dongle and USB dongle must be qualified or it will influence connection.
2. When your device’s audio&microphone socket is separative, you need to buy a cable adapter, Or the talking function doesn’t work when you use it as a wired headset
3. If you can’t search the headset, please refresh your bluetooth more times.
4. Whether it works as a bluetooth headset or a wired headset, if the microphone doesn’t work, please check whether you already set up the “Mic output “mode is from the headset.
5. When all checking is failed, you can try to connect the headset with another bluetooth device to check whether it is compatibility problem or some problems with your current audio equipment.
6. Please don’t use the charger with a voltage of more than 5V to charge the headset, it may damage the headset

(For the first time using of headset, if it can’t be Opened,Please charge the unit and re-try it later!

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>