LYNX 085172-000 Sliding Tank Tray Instruction Manual
- September 3, 2024
- LYNX
Table of Contents
LYNX 085172-000 Sliding Tank Tray
Specifications
- Model: LSTLP Sliding Tank Tray
- Manufacturer: Lynx Grills
- Material: Steel
- Includes: Sliding Tray Tank Assy, Right Roller Rail, Left Roller Rail, Rivet Nut, 1/4-20 Truss Head Screws (QTY 6)
Installation
NOTE: Install LEFT and RIGHT roller rails before sliding tank tray into position.
- STEP 1: Open the right door of the grill cart. Install the LEFT roller rail using (3) 1/4-20 Truss head screws. Secure the screws into the rivet nuts on the bottom of the grill cart.
- STEP 2: Install the RIGHT roller rail using (3) 1/4-20 Truss head screws. Secure the screws into the rivet nuts on the bottom of the grill cart.
- STEP 3: Insert the sliding tank tray assembly by aligning the roller wheels of the tray with those on the LEFT and RIGHT rails. Slide the tray all the way inward until it reaches the backstop.
MORE INFORMATION
- Lynx Grills
- 62201 Hwy 82 West
- Greenwood, Mississippi 38930 USA
- 888-289-5969
- www.lynxgrills.com
FAQ
- Q: What should I do if the sliding tank tray does not slide smoothly?
- A: If you encounter difficulty in sliding the tray, check for any obstructions or misalignments in the roller wheels. Ensure that the tray is properly aligned with the rails before sliding.
- Q: Can I install the sliding tank tray on my own?
- A: Yes, the installation process is designed to be user-friendly. Follow the provided instructions carefully for successful installation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>