ZEBRA ET60 Versatile Rugged Android Business Tablets Installation Guide

: September 17, 2024
: ZEBRA

Table of Contents

Accessories that power devices
Accessories that power devices
Accessories that enable productivity solutions
Accessories that enable productivity solutions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**ZEBRA ET60 Versatile Rugged Android Business Tablets Installation Guide

**

The most versatile rugged Android business tablets

Accessories that power devices

Vehicle Docks

Vehicle Dock Charging, 2 x USB Type A, 1 x RS232
SKU# CRD-ET6X-VEHDK-CON-01

Small design, Quick release, VESA mount pattern
IP 66, Extreme shock, vibration and thermal shock testing – built to survive constant pounding
Heated pogo pins to avoid corrosion and loss of connection
2 USB Type A ports and one serial port to connect peripherals
All ports are securely covered in a compartment
Allows locking the ET6x

Vehicle Dock with Antenna Pass Through
SKU# CRD-ET6X-VEHDK-PTA-01

Small design, Quick release, VESA mount pattern
IP 66, Extreme shock, vibration and thermal shock testing – built to survive constant pounding
Heated pogo pins to avoid corrosion and loss of connection
3 antenna passthroughs for strong GPS and wireless signals
2 USB Type A ports and one serial port to connect peripherals
All ports are securely covered in a compartment
Allows locking the ET6x

Vehicle Dock Power Supplies and Cables

DC/DC Power Supplies
SKU# PS1370

To be installed between the vehicle dock and the vehicle battery
24 to 90 VDC input voltage, 90W
30° to +50° C Operating Temperature
Isolated
Must be used with the ET60 Touch Screen Heater configuration

DC Power Adapter Cable
SKU# CBL-ET6-ADPA2-1

To connect the DC/DC Power Supply PS1370 with the ET6 Vehicle Dock

DC Power Extension Cable
SKU# CA1210

To connect the DC/DC power supply PS1370 with the vehicle battery

DC Power Adapter to VC70 DC Power Cable
SKU# CB000416A01

Replace a legacy Zebra VC70 and reuse the existing DC power cable
To be installed between the existing DC power cable and the DC/DC power supply

DC Power Adapter to VC50 DC Power Cable
SKU# CB000417A01

Replace a legacy Zebra VC50 and reuse the existing DC power cable
To be installed between the existing DC power cable and the DC/DC power supply

AC/DC Power Supply
SKU# 450020

100-240 VAC in, 14 VDC out
To power the vehicle dock from a regular 110/220 VAC outlet

Please order AC cable separate:

450040 (for US)
450047 (for Australia/New Zealand)
450042 (for EU)
450041 (for UK)
ACC-L10LINECORD-TW (for Taiwan)
ACC-L10LINECORD-JP (for Japan)
ACC-L10LINECORD-CN (for China)

Vehicle Dock Alternative DC Power Supplies and Cables

DC/DC Power Supplies
9-60 VDC : SKU# 450083
50-150 VDC : SKU# 450084

To be installed between the vehicle dock and the vehicle battery
Can not be used with the ET60 Touch Screen Heater configuration
Check the voltage of the vehicle before selecting the variant

Direct Wire Kit
SKU# 300039

To connect the 450083 or 450084 DC/DC power supply with the Vehicle Dock and the vehicle battery

DC Power Adapter to VC DC Power Cable with CPC Connector
SKU# CBL-ET-ADPA1-1

Replace a legacy Zebra VC and reuse the existing DC power cable
To be installed between the existing DC power cable and the 450083 or 450084 DC/DC power supply

DC Power Adapter to legacy LXE VC DC Power Cable
SKU# ACC-PWRCBL01

Replace a legacy LXE/Honeywell VC and reuse the existing DC power cable
To be installed between the existing DC power cable and the 450083 or 450084 DC/DC power supply

Cigarette Lighter Adapter (CLA) to Vehicle Dock
SKU# 450143

Power the Vehicle Dock from a 12V cigarette lighter
To be installed between the vehicle dock and the cigarette lighter

Vehicle Mounts

The Vehicle Docks have the VESA mount pattern and can be used with a range of 3rd party mounts.

Warehouse Keyboard for Vehicles

Warehouse Keyboard

Alphanumeric
12 direct Function keys
Field replaceable elastomer and cable
IP66, -30 to +50 C, condensing environments
Dimmable backlight
Controller chip with build-in temperature compensation
Heated board and drainage system for condensing environments
AMPS mounting holes pattern

MT4301| RAM mount, 4″ arm|
---|---|---
MT4302| RAM MOUNT, 8.5″ ARM (12″ arm length with two plates attached)|
MT3501| VESA plate (for 4″ or 12″ RAM arm)|
MT3502| Round plate (for 4″ or 12″ RAM arm)|
MT3505| Clamp base (for 4″ or 12″ RAM arm), 2″ max. width|
MT3507| Clamp base (for 4″ or 12″ RAM arm), 3″ max. width|
RAM-D-247U-4| Mount, RAM, Square Post Clamp Base for Posts up to 4″ Wide, D-size ball|
MT3509| Rail base (for 4″ or 12″ RAM arm), 1-1/4″ to 1-7/8″|
MT3510| Rail base (for 4″ or 12″ RAM arm), 2″ to 2 1/2″|
350025| MOUNT, L10/ET8X, RAM FORKLIFT MOUNTING KIT|
STND-ET-DESK-01| Desk Stand for Vehicle Dock|

Accessories that power devices

Warehouse Keyboard for Vehicles

Warehouse Keyboard

Alphanumeric
12 direct Function keys
Field replaceable elastomer and cable
IP66, -30 to +50 C, condensing environments
Dimmable backlight
Controller chip with build-in temperature compensation
Heated board and drainage system for condensing environments
AMPS mounting holes pattern

KYBD-QW-VC-01

|

VC USB Keyboard QWERTY

|
---|---|---

KYBD-AZ-VC-01

|

VC USB Keyboard AZERTY

|

KYBD-QW-ET-S-1

|

VC USB Keyboard QWERTY with USB Type A Cable

|

CBL-ET-KBUSB1-01

|

USB Type A Cable for Warehouse Keyboard

|

CBL-ET-KBUSB2-01

|

USB & RS232 Y-Cable for Warehouse Keyboard (to power keyboard heaters)

|

KT-KYBDTRAY-ET6X-01

|

ET6x Keyboard Tray for Vehicle Dock, VESA & AMPS Mounting Hole Pattern

|

AC/DC Power Supply

AC/DC Power Supply
SKU# PWR-BGA15V45W-UC2-WW

100-240 VAC in, 14 VDC out
To power the tablet from a regular 110/220 VAC outlet

Please order AC cable separate:

450040 (for US)
450047 (for Australia/New Zealand)
450042 (for EU)
450041 (for UK)
ACC-L10LINECORD-TW (for Taiwan)
ACC-L10LINECORD-JP (for Japan)
ACC-L10LINECORD-CN (for China)

Batteries

Standard Battery
SKU# BTRY-ET6XA-9AH-01

ET6x Android Standard Battery, 9.3 Ah
Zebra’s PowerPrecision+ batteries provide the intelligence to better manage a battery pool.
Obtain advanced battery state of health information including charge level and battery age based on usage patterns.

Extended Battery
SKU# BTRY-ET6XA-18AH-01

ET6x Android Extended Battery, 18.7 Ah
Zebra’s PowerPrecision+ batteries provide the intelligence to better manage a battery pool.
Obtain advanced battery state of health information including charge level and battery age based on usage patterns.

No Cells Battery
SKU# BTRY-ET6X-0AH-01

Battery housing without cells
Cost saving and elimination of battery maintenance in fixed mount installations

Battery Charger

2-Bay Battery Charger
SKU# SAC-ET6X-2SCHG-01

To charge the standard as well as the extended battery in any combination.

Accessories that enable productivity solutions

**2-in-1 Keyboard

**

Add to any ET6x tablet for a true 2-in-1 laptop experience.
Patented magnetic latching for positive audio feedback when latching to tablet.
Friction hinge to set viewing angle to user preference.
Opens 180° for infinite viewing adjustment.
IP65 dust and water sealing
Screwless design for more rigid assembly
Can be combined with Zebra’s ET60 / ET65 docking solutions, and other accessories.
78 full sized keys.
Large touchpad with ergonomic mouse buttons and multi-finger gestures.
Scissor switch keys for quality notebook feel.
Integrated handle for easy portability even with gloves.
Primary backlight color choice. Can scroll through primary colors with function keys for quickly changing colors and backlight intensity.
Kensington lock slot to secure keyboard and tablet.
Five layouts available (US English, UK English, French, Spanish, German)

SKUs

US English Layout : KYB-ET6X-2IN1-US1-01
UK English Layout : KYB-ET6X-2IN1-UK1-01
French Layout : KYB-ET6X-2IN1-FR1-01
Spanish Layout : KYB-ET6X-2IN1-ES1-01
German Layout : KYB-ET6X-2IN1-DE1-01

Accessories that enable productivity solutions

Stylus

Active Stylus
SKU# SG-ET8X-STYLUS1-01

Allows for a large range of pressure sensitivity, tilt detection and hover capability.
IP 55 water and dust protected.
Two side buttons for easy erase and menu access.
Can be tethered to tablet with SG-ET5X-SLTETR-01 (sold separately).
Can be secured to tablet with Pen Loop Holder (SG-ET8X-PENLOOP1-01) or inserted into handle SG-ET8X-HANDLE1-01 (sold separately).
Uses one AAAA battery, included.

Stylus Holder
SKU# SG-ET8X-PENLOOP1-01

Adhesive Loop attaches to rear of tablet

Coiled Tether
SKU# SG-ET5X-SLTETR-01

Used to tether stylus to the tablet.
Can be attached to tether points on device corners

Passive Stylus
SKU# SG-STYLUS-TCX-MTL-03
Fiber tipped stylus – pack of 3

Heavy-duty and made from stainless steel / brass. No plastic parts — real pen feel.
Micro-knit, hybrid-mesh, fiber tip provides silent, smooth gliding use.
Length of stylus is 5″.
Tether to device or hand strap using SKU# SG-TC5NGTC7NG-TETHR-03.

Passive Stylus Tether
SKU# SG-TC5NGTC7NG-TETHR-03

Can be attached to tether points on device corners
String type tether prevents loss of stylus.

Small Passive Stylus Kit With Tether
SKU# SG-TC7X-STYLUS-03
Pack of 3

Conductive Carbon-filled plastic material w/ 5mm tip
Length of stylus is 3.5″.
Rigid plastic stylus is optimized for enterprise durability.
Clip & tether point to reduce loss.
Tether to the ET6X using the attachment points on the top right or top left sides of tablet.

Straps and Stand

Kickstand with Hand Strap
SKU# XBK-ET6X-KCKSTD-01

Easy to use while walking
Adjustable to hand size
Detents help lock desired rotation angle
Kickstand provides great ergonomics for reading and touch screen interactions while the tablet is on flat surfaces
User adjustable display angle

Replacement Hand Strap for Kickstand
SKU# SG-ET5X-RHTP1-01