logitech G102 Light Sync Gaming Mouse Instruction Manual

: September 3, 2024
: Logitech

Table of Contents

G102 Light Sync Gaming Mouse
Product Specifications
Product Usage Instructions
Quick Setup
Detailed Setup
Pairing to a Second Computer with Easy-Switch
MagSpeed Adaptive Scroll-Wheel with SmartShift

G102 Light Sync Gaming Mouse

“`html

Product Specifications

MagSpeed scroll wheel
Mode shift button for the scroll wheel — shift between
line-by-line scrolling and free-spinning
Battery status LED
Silicone side grips
USB-C charging port
On/Off button
Darkfield 4000DPI sensor
Easy-Switch and connect button
Back/Forward buttons

Product Usage Instructions

Quick Setup

Go to the interactive setup guide for quick interactive setup
instructions. For more detailed information, refer to the Detailed
Setup below.

Detailed Setup

Ensure the mouse is turned on by using the On/Off switch
located at the bottom.
If the number 1 LED on the bottom is not blinking fast, perform
a long press of three seconds on the EasySwitch button on the mouse
bottom.
Connect your mouse:
- Wireless USB receiver: Plug the receiver into a USB port on
  your computer.
- Bluetooth: Open Bluetooth settings on your computer, search for
  new devices, and click on MX Anywhere 3 to connect. Refer to
  detailed instructions for more guidance.
Install Logitech Options Software from logitech.com/options to
customize your mouse and access advanced features.

Pairing to a Second Computer with Easy-Switch

Short press on the Easy-Switch button allows you to switch
between channels (computers).
Press and hold the Easy-Switch button for three seconds to put
the mouse in discoverable mode for pairing.
Choose Bluetooth or USB connection method to connect your mouse
to your computer.

MagSpeed Adaptive Scroll-Wheel with SmartShift

The scroll wheel automatically shifts between line-by-line and
free-spinning modes based on scrolling speed. You can manually
switch modes by pressing the mode shift button.

In Logitech Options software, customize SmartShift settings
including enabling/disabling automatic mode shifting and adjusting
sensitivity.

Frequently Asked Questions (FAQ)

Q: How many computers can be paired with the mouse?

A: The mouse can be paired with up to three different computers
using the Easy-Switch feature.

Q: How can I manually switch between scrolling modes?

A: Press the mode shift button on top of the mouse to manually
switch between line-by-line and free-spinning modes.

“`

Getting Started
QUICK SETUP Go to the interactive setup guide for quick interactive setup instructions. If you want more in-depth information, go to the Detailed Setup below.
DETAILED SETUP 1. Make sure the mouse is turned on. The On/Off switch is located on the bottom of the mouse.
The number 1 LED on the bottom of the mouse should be blinking fast. NOTE: If the LED is not blinking fast, do a long press of three seconds on the EasySwitch button on the mouse bottom. 2. There are two ways you can connect your mouse:
o Use the wireless USB receiver Plug the receiver into a USB port on your computer.
o Connect directly via Bluetooth Open the Bluetooth settings on your computer to complete the pairing. Search for new devices and click on MX Anywhere 3 to connect. Click here for more details on how to do this on your computer. If you experience issues with Bluetooth, click here for Bluetooth troubleshooting.
3. Install Logitech Options Software. Download Logitech Options to customize your mouse and benefit from advanced shortcuts and all the possibilities this mouse has to offer. To download and learn more about the full range of features, go to logitech.com/options.

LEARN MORE ABOUT YOUR PRODUCT Product Overview
1. MagSpeed scroll wheel 2. Mode shift button for the scroll wheel — shift between line-by-line scrolling and free-
spinning 3. Battery status LED 4. Silicone side grips 5. USB-C charging port 6. On/Off button 7. Darkfield 4000DPI sensor 8. Easy-Switch and connect button 9. Back/Forward buttons
YOU CAN PAIR TO A SECOND COMPUTER WITH EASY-SWITCH Your mouse can be paired with up to three different computers using the Easy-Switch button to change the channel.

1. A short press on the Easy-Switch button will let you switch channels (from one computer to another). Select the channel you want and go to the next step.
2. Press and hold the Easy-Switch button for three seconds. This will put the mouse in discoverable mode so that it can be seen by your computer. The LED will start blinking fast.
3. Choose how you want to connect your mouse to your computer, Bluetooth, or USB: o Bluetooth: Open the Bluetooth settings on your computer to complete the pairing. More details here. o USB receiver: Plug the receiver into a USB port, open Logitech Options, and select: Add devices > Setup Unifying device, then follow the instructions.
MagSpeed adaptive scroll-wheel with SmartShift

The speed-adaptive scroll wheel shifts between two scrolling modes automatically. As you scroll faster, it will automatically shift from line-by- line scrolling to free-spinning.
Line-by-line (ratchet) mode — ideal for precise navigation of items and lists. Hyper-fast (free-spin) mode — near-frictionless spinning, letting you fly through long
documents and web pages.
Switch modes manually You can also manually switch between modes by pressing the mode shift button.
By default, mode shift is assigned to the button on top of the mouse. In Logitech Options software, you can decide to disable SmartShift if you prefer to stay in one scrolling mode and always shift manually. You can also adjust the SmartShift sensitivity, which will change the speed required to automatically shift into free spinning.

Horizontal Scroll
You can scroll horizontally with your MX Anywhere 3! This is done with a two- button combination: Press and hold one of the side buttons and scroll with the wheel simultaneously. NOTE: The horizontal scroll is ON by default in your Logitech Options software. You can customize this feature in the Point & Scroll tab in Logitech Options. For more detailed information on Horizontal scroll, click here.

Back/Forward buttons The back and forward buttons enhance navigation and simplify tasks.
To move back and forward: Press the back or forward button to navigate web or document pages, depending on the location of the mouse pointer.
NOTE: On a Mac, enabling the back/forward buttons requires installation of Logitech Options software. In addition to enabling the buttons for use with Macs, Logitech Options software lets you assign other useful functions to the buttons, including undo/redo, OS navigation, volume up/down, and more. App- Specific Settings Your mouse buttons can be assigned to perform different functions for different applications. For instance, you can assign the side buttons to control volume in Spotify, copy/paste in Microsoft Excel, or undo/redo in Adobe Photoshop. When you install Logitech options, you can install predefined app-specific settings that will adapt the mouse button behavior to the selected applications. Here are the app-specific settings we have created for you:

Default settings Browser (Chrome, Edge, Safari) Zoom
Microsoft Excel Microsoft Word Microsoft PowerPoint Adobe Photoshop Adobe Premiere Pro Apple Final Cut Pro

1 Middle Button Open link in a new tab
Middle Button
Pan (Hold and move the mouse) Pan (Hold and move the mouse) Pan (Hold and move the mouse) Pan (Hold and move the mouse) Pan (Hold and move the mouse) Pan (Hold and move the mouse)

2 Back Back Mute / Unmute Microphone

Forward Forward
Start/Stop Video

Undo

Redo

Undo

Redo

Undo

Redo

Undo

Redo

Undo

Redo

Undo

Redo

With these settings, the wheel mode-shift button retains the same functionality across all applications.
Each of these settings can be customized manually, for any application.

Adjust the feel of the scroll wheel
When you scroll in Ratchet mode, you can adjust the feel of your scroll wheel on the “Point & Scroll” tab in Logitech Options.
A lower force will make the ratchet very subtle and smooth. A higher force will make every ratchet very firm and precise.

Assign gestures to the top button If you want more advanced functionality, you can assign the top button of the mouse to be the “Gesture Button”. This will transform your top button into a powerful multi-function button allowing you to use gestures for desktop navigation, app management, pan, zoom, and more. On the Mouse tab, select the top button below the wheel and click on Gesture Button.
By default, the gesture buttons will allow you to navigate between windows and desktops.
In order to perform the gestures, you will need to hold the button while you move the mouse.

Flow between two computers You can work on multiple computers with a single MX Anywhere 3. With Logitech Flow, you can use the mouse cursor to move from one computer to the next. You can even copy and paste between computers, and if you have a compatible Logitech keyboard, such as MX Keys, the keyboard will follow the mouse and switch computers at the same time.
You will need to install Logitech Options software on both computers and follow these instructions. Charging MX Anywhere 3

Connect one end of the provided charging cable to the USB-C port on the mouse and the other end to a USB power source.
A minimum of a three-minute charge gives you enough power for a full day of use. Depending on how you use the mouse, a full charge can last up to 70 days. Battery life may vary depending on user and operating conditions. Check Battery Status The LED on the top of the mouse indicates battery status.
You can install Logitech Options software to receive battery status notifications, including lowcharge warnings.

LED Color Green Red Pulsing green

Indications From 100% to 10% charge 10% charge or below While charging