Miniso K616-833 Wireless Keyboard and Mouse Set User Manual
- June 5, 2024
- MINISO
Table of Contents
K616-833 wireless keyboard and mouse set
manual
Features:
- The keyboard and mouse share a USB receiver and both the keyboard and mouse have their own receiver storage compartment to prevent loss
- 2.4G connection, 10 meters stable transmission distance
- The bottom bracket design of the keyboard can adjust the angle of the keyboard for easy use
- Low power consumption, automatically enters power-saving mode when not in use
- Mute mouse buttons
Specification Description:
mouse:
- Size: 9.8cmx5.8cmx3.7cm
- Color: pink
- Connection: 2.4G
- Number of keys: 3 keys
- Working voltage: 1.5V
- Working current: 25mA
- Working temperature and humidity: -25～55℃/<85%RH
- Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10
keyboard
- Size: 36.6cmx13.1cmx2.4cm
- Color: pink
- Connection: 2.4G
- Number of keys: 100 keys
- Working voltage: 1.5V
- Working current: 20mA
- Working temperature and humidity: -25～55℃/<85%RH
- Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10
Instructions:
Open the battery cover at the bottom of the keyboard, take out the receiver,
insert the receiver into the USB port of the computer, put a AA battery (AA
battery) into the battery slot, cover the keyboard battery cover, and then
open the battery cover of the mouse to put a battery Insert AA batteries (AA
batteries) into the battery slot and then cover the mouse battery cover to
use.
Precautions:
- Do not expose the battery to humidity and high temperature, and avoid contact with conductive materials or liquids
- Do not short circuit
- Do not disassemble or attempt to repair this product by yourself.
- If the product does not operate normally, please contact the after-sales department in time to obtain relevant services or maintenance storage methods:
Power off the storage, do not expose to humidity, high-temperature environment
Receiver information:
- Current: 20mA
- USB interface: Compatible with USB 1.1/2.0/3.0
- Product size: 18.514.55.5mm
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
ISED
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Documents / Resources
|
Miniso K616-833 Wireless Keyboard and Mouse
Set
[pdf] User Manual
M833A, 2ART4-M833A, 2ART4M833A, K616-833 Wireless Keyboard and Mouse Set,
K616-833, Wireless Keyboard and Mouse Set
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>