EWelink 2CH Series Smart Switch User Guide

EWelink 2CH Series Smart Switch

• Model: 2CH12VSJ02CS
• Model: 2CH12VSJ02CSRF

Parameters

• Input voltage ： DC/AC 7~32V/MicroUSB 5V Max.Current:2200W/10A
• Ｗi-Fi Standard :Wi-Fi 2.4ghz b/g/n+BLE Working temperature: -20℃~70℃
• Size : 1163825mm

Checklist before using the device

• Your smartphone or tablet is connected to a 2.4g WiFi with internet.
• You need to enable Bluetooth on the phone. You have the correct WiFi PWD.
• Your smartphone or tablet must have access to the APP store, and Google Play.
• Your router is MAC-open.

User Guide

1. Start with“EWelink”APP.
2. Register an EWlink account.
3. If you have an EWelink account just log in.
4. Power up.
   ON/OFF operating principle:
   The connected appliances work/stop through live wire power on/off.

Add device flow to mobile APP

1. After installation, power the device, and hold down the Reset button(pairing button) for 6 seconds until the Network indicator(red light) blinks quickly (blinking twice and on)
2. Open the ewelink app, click on the upper right corner, and then click on “Add Device.”
3. Select your WiFi, enter the WiFi password, and click “Next.”
4. Wait for a few seconds, and when the device is found, click .
5. After successful addition, click“Next”

Inching /interlock Switch

1. Click switch name.
2. Click, and select “setting”.
3. Set inching duration: Click “Inching Settings”, and set inthe ching duration.
4. Enable the interlock: Click “interlock”, and set the interlock.

Remote control pairing/Clear code

Matching

1. Hold the RF Pairing button you want to pair for 3 seconds until the blue light is on.
2. Then long press the remote control buttons you want to pair.
3. Loosen the remote control buttons, pairing success.
   • note: Pair Other buttons, repeat steps ①~③.

Clear code:
Long press the RF pairing button you want to clear for 15 seconds until the RF pairing indicator(blue light) is off loosen the RF Pairing button.

note: the pairing/clear code method is only available with RF function switch/module reference.

TROUBLESHOOTING

Solutions for the failure of product matching and offine:
Enter the homepage of the App, and click the icon in the lower right corner of the interface to enter. “Message”>hits” Guide”. “Profile”>hits”Ewelink support”

If none of the above is resolved, please open it with another phone. Personal hotspot, try to read.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>