AC INFINITY AC-CCA6 Clip Fan Instruction Manual
- September 3, 2024
- AC Infinity
Table of Contents
AC-CCA6 Clip Fan
“`html
Specifications:
-
Models: CLOUDRAY A6, CLOUDRAY A9, CLOUDRAY S6, CLOUDRAY S9,
CLOUDRAY S6 (2 Pack) -
Manual Code: CR2403X1
-
Product Codes: AC-CCA6, AC-CCA9, AC-CCS6, AC-CCS9, AC-CCX6
-
UPC-A: 819137022416, 819137022454, 819137022423, 819137022461,
819137024656
Product Information:
The Cloudray series by AC Infinity features advanced circulation
fans designed for optimized airflow control and performance. With
models like CLOUDRAY A6, A9, S6, S9, and S6 (2 Pack), these fans
are equipped with innovative features to enhance air circulation in
various environments.
Key Features:
-
Advanced 35mm Motor: Re-engineered heavy-duty motor for precise
oscillation and extended lifespan. -
Next-Gen Control: 10 speeds and 10 Dynamic Wind Modes for
customizable airflow at different growth stages. -
Targeted Airflow: 10 oscillation levels allow focused
circulation or wide coverage without hitting walls. -
IP54 Protection: Sealed to IP54 standards for resistance to
liquids and dust. -
UIS™ Compatible: Works with UIS controllers for temperature,
humidity, timers, cycles, scheduling, and WiFi app control.
Product Contents:
- CIRCULATION FAN (x1)
- GRIP CLIP (x1)
- For CLOUDRAY S6 – 2 Pack:
- EXTENSION CORD (x1)
- CABLE TIE (x4)
- CABLE MOUNT (x1)
- CIRCULATION FAN (x2)
Product Usage Instructions:
-
Ensure the power source meets the product’s electrical
requirements. -
Read all instructions in the manual before installation and
use. -
Do not attempt to hardwire the product or perform retrofitting
actions. -
Avoid using the product in hazardous locations or wet
atmospheres. -
Exercise caution with rotating parts during installation,
operation, and maintenance. -
Avoid inserting fingers or objects into the fan grille during
operation. -
Do not cover power cords with fabric materials.
-
Unplug the power cord before servicing or moving the
product.
Frequently Asked Questions (FAQ):
Q: Can the Cloudray series fans be used in wet
environments?
A: No, the product must not be used in
potentially hazardous locations such as wet atmospheres to prevent
damage and ensure safety.
Q: Is the Cloudray series compatible with any
controllers?
A: Yes, the fans are compatible with UIS
controllers for enhanced control over temperature, humidity,
timers, cycles, and scheduling.
“`
CLOUDRAY SERIES
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and
friendly customer service. If you have any questions or suggestions, please
don’t hesitate to contact us. Visit www.acinfinity.com and click contact for
our contact information.
EMAIL support@acinfinity.com
WEB www.acinfinity.com
LOCATION Los Angeles, CA
3
MANUAL CODE CR2403X1
PRODUCT CLOUDRAY A6 CLOUDRAY A9 CLOUDRAY S6 CLOUDRAY S9 CLOUDRAY S6, 2 Pack
MODEL AC-CCA6 AC-CCA9 AC-CCS6 AC-CCS9 AC-CCX6
UPC-A 819137022416 819137022454 819137022423 819137022461 819137024656
4
MANUAL INDEX
Manual Index ……………………………………………………………………… Page 5 Product Warning
…………………………………………………………………. Page 6 Key Features ………………………………………………………………………
Page 7 Product Contents ………………………………………………………………… Page 8 Installation
…………………………………………………………………………. Page 9 Powering and Setup
……………………………………………………………. Page 11 Cleaning ……………………………………………………………………………. Page
12 UISTM Platform ……………………………………………………………………. Page 14 Connecting to
Controllers …………………………………………………….. Page 15 Programming
……………………………………………………………………… Page 16 FAQ …………………………………………………………………………………… Page
21 Other AC Infinity Products ……………………………………………………. Page 22 Warranty
……………………………………………………………………………. Page 23
5
PRODUCT WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
1. Ensure your power source conforms to the electrical requirements of this
product.
2. Check your local code restrictions for additional safety measures that may
be needed for a proper code compliant installation.
3. Read all instructions before installing and using this product.
4. If you are unfamiliar or have doubts about performing this product’s
installation, seek the services of a qualified, trained, and licensed
professional. Inappropriate installation will void this product’s warranty.
5. Do not attempt to hardwire this product. Performing any retrofitting
actions may result in personal injury and/or electrical damage, and will void
this product’s warranty.
6. This product must not be used in potentially hazardous locations such as
flammable, explosive, chemical-laden or wet atmospheres.
7. Do not cover power cords with rugs or other fabric materials.
8. This product has rotating parts. Safety precautions should be exercised
during the installation, operation, and maintenance of this product.
9. Do not insert or allow fingers or foreign objects to enter through the fan
grille as it may cause electric shock, fire, or damage to this product. Do not
block or tamper with this product in any manner while it is in operation.
10. Do not depend on the on/off programming as the sole means of shutting
power from this product. Unplug the power cord before installing, servicing,
or moving this product.
11. Do not operate this product while its cord is damaged, or if it
malfunctions, has been dropped, or is damaged in any manner.
6
KEY FEATURES
ADVANCED 35MM MOTOR Re-engineered heavy-duty motor delivers precision oscillation quietly and efficiently with twice the lifespan of other clip fans.
NEXT-GEN CONTROL 10 speeds and 10 Dynamic Wind Modes support natural airflow that can be adjusted to optimize each grow stage.
TARGETED AIRFLOW* 10 oscillation levels enable circulation to focus on a specific area or to cover the widest range possible without hitting tent walls.
ADJUSTABLE RANGE Flexible fan head tilts up 30° and downwards 40° to expand the scope of circulation and easily reach your desired height.
IP54 PROTECTION Clip fan is specially sealed to Ingress Protection 54 standards, rated for a higher resistance to liquids and dust.
UISTM COMPATIBLE Pairs with UIS controllers for temp, humidity, timers, cycles, and scheduling plus WiFi app control.
*S-Series only 7
PRODUCT CONTENTS
CLOUDRAY A6, CLOUDRAY A9, CLOUDRAY S6, CLOUDRAY S9
CIRCULATION FAN (x1)
GRIP CLIP (x1)
CLOUDRAY S6 – 2 Pack
EXTENSION CORD (x1)
CABLE TIE (x4)
CABLE MOUNT (x1)
CIRCULATION FAN (x2)
8
GRIP CLIP (x2)
EXTENSION CORD (x2)
CABLE TIE (x8)
CABLE MOUNT (x2)
INSTALLATION
STEP 1 Twist to remove the knob piece from the grip clip.
STEP 2 Slide the swivel into the grip clip. You may need to pull its clamps
apart for it to fit over the swivel. This tightness ensures that your fan will
not tilt downwards on its own.
INSTALLATION NOTE DO NOT alter the grip clip’s neck positioning before
connecting it to the swivel. The neck is packaged in the proper position so
that your fan will not hit the tent pole.
9
INSTALLATION
STEP 3 Replace the knob of the mounting point as desired.
STEP 4 Clamp your clip fan onto a pole or post.
10
POWERING AND SETUP
STEP 1 Plug your clip fan’s power cord into an AC power outlet to power it.
STEP 2 You may cable manage the cords using the included cable ties or cable
mounting set. Adhere the tie mount onto a clean surface. Loop the wire tie
into the mount and around the cables.
11
CLEANING
STEP 1 Unplug your clip fan.
STEP 2 Unscrew the bottom of the front grille using a screwdriver.
Removing the front grille to clean the fan blades will not void your warranty.
12
CLEANING
STEP 3
A
B
Twist the grille counter-clockwise and pull
to remove it.
STEP 4 Wipe off any dust and debris from the grille and fan blades using a damp cloth. Set aside to dry as needed.
STEP 5 Realign the grille over your clip fan, twist clockwise, then screw the
grille back on to lock it in place.
13
UISTM PLATFORM
The UISTM platform enables you to connect a single central controller with
several grow devices simultaneously. By creating this fully integrated system,
you can power and program all your devices together or separately for
optimized grow tent management. Your grow system can be regulated using your
controller hub or remotely on the AC Infinity app (paired with compatible
controllers), where you will have access to automation programming and climate
data. You can also connect your favorite grow light and outlet device to
integrate them into the UIS platform using our RJ11/12 adapter and control
plug module.
Central controllers, mounting plates, and grow devices will be sold separately
and may still be in development at the time of your purchase of this product.
14
CONNECTING TO CONTROLLERS
The CLOUDRAY circulation fan can connect with select smart controllers as part
of an integrated system using the included UIS cable. Please see below for
limitations. STEP 1 — CONNECT TO DEVICE Plug the UIS connector with the gasket
end into your clip fan. The gasket is specially designed to protect against
liquids and dust.
STEP 2 — CONNECT TO CONTROLLER Plug the standard UIS connector into one of the
controller’s ports.
*CONTROLLER 69 PRO not included 15
PROGRAMMING
A-SERIES
POWERING ON/OFF Press the power button to turn your clip fan OFF. Pressing it
again from OFF will turn your fan ON at its last speed setting.
FAN SPEED ADJUSTING The speed button cycles through fan speed levels 1-10,
indicated by the row of white LED lights. Press the speed button to increase
the fan speed level by one.
Cycling past speed 10 will activate Dynamic Wind Mode. Cycling past that will
return to fan speed level 1.
Speed Button
16
Power Button
PROGRAMMING
A-SERIES
DYNAMIC WIND MODE This mode will alternate speeds between levels 1-10 to
simulate a natural breeze.
STEP 1 Set the fan speed to your desired maximum level using the speed button.
We do not recommend setting your max speed level to level 1; this will
eliminate the speed range.
STEP 2 Hold the speed button for 3 or more seconds to enter Dynamic Wind Mode.
This will also lock in your current fan speed as the maximum level.
STEP 3 Deactivate max Dynamic Wind Mode by pressing the speed button.
Your clip fan will continue running at your maximum level until you adjust it.
17
PROGRAMMING
S-SERIES
POWERING ON/OFF Press the speed button to turn your clip fan ON. Cycling past
Dynamic Wind Mode will turn your clip fan OFF.
Speed Button
FAN SPEED ADJUSTING The speed button cycles through OFF, fan speeds 1-10,
indicated by the row of white LED lights. Press the speed button to increase
the fan speed level by one. Cycling past speed 10 will activate Dynamic Wind
Mode. Cycling past that will return to fan speed level 0.
18
PROGRAMMING
S-SERIES
DYNAMIC WIND MODE This mode will alternate speeds between levels 1-10 to
simulate a natural breeze.
STEP 1 Set the fan speed to your desired maximum level using the speed button.
We do not recommend setting your max speed level to level 1; this will
eliminate the speed range.
STEP 2 Hold the speed button for 3 or more seconds to enter Dynamic Wind Mode.
This will also lock in your current fan speed as the maximum level.
STEP 3 Deactivate max Dynamic Wind Mode by pressing the speed button.
Your clip fan will continue running at your maximum level until you adjust it.
19
PROGRAMMING
S-SERIES
OSCILLATION In addition to the standard features, S-Series models can
oscillate to provide airflow at a wide angle. The oscillation function is
manually activated using the oscillation button and cannot be controlled using
external UIS programming.
If set to OFF, your clip fan will not oscillate regardless of any external
programs.
If set to ON, oscillation will automatically start if the external program
activates your clip fan to turn ON. Oscillation will then automatically stop
if the external program deactivates your clip fan to turn OFF.
ADJUSTING OSCILLATION RANGE The oscillation button cycles through oscillation
levels 0-10 with a maximum 90° angle range. This will ensure that your clip
fan will not come into contact with your grow tent while still enabling you to
adjust the focus of circulation.
Press the oscillation button to increase how wide your clip fan will oscillate
by one level. These levels are indicated by the orange row of LED lights.
Pressing the button past speed 10 will return to level 0. 20
Oscillation Button
CLOUDRAY FAQ
Q: Can I mount this clip fan upside down? A: No. We do not recommend mounting
the fan upside down.
Q: Will I be able to hardwire this clip fan to my own controller or
thermostat? A: We do not recommend hardwiring or splicing our fan’s power
wires. Such modifications may compromise electrical safety and will void this
product’s warranty.
Q: Do I need to use a power converter if I’m outside the US? A: This product’s
voltage range is 100-240V AC. You may need a simple travel adapter to plug it
into a foreign socket, or a power converter if your country uses a different
voltage.
Q: What is the CFM of my clip fan? A: Please refer to your CLOUDRAY model’s
product listing for its CFM specification.
Q: Will the clamp be able to hold onto my grow tent? A: The heavy-duty clamp
is capable of gripping onto the poles of any thickness in any grow tent.
Q: Will I be able to connect additional units to this clip fan? A: The
CLOUDRAY does not support daisy-chaining or interconnectivity between
additional clip fans. However, multiple fans can be connected to a UISTM
controller to receive smart programming.
Q: How long can I keep this clip fan running? A: The CLOUDRAY features the
latest innovations in step motor technology, allowing it to run continuously
for 24 hours a day.
21
AC INFINITY PRODUCTS
Inline Duct Fans The CLOUDLINE series is a line of duct fans designed to
quietly ventilate AV rooms and closets, as well as various DIY air circulation
and exhaust projects. Features a thermal controller with intelligent
programming that will automatically adjust duct fan speeds in response to
changing temperatures.
Advance Grow Tents The CLOUDLAB series is a line of grow tents designed to
create ideal growing conditions and facilitate indoor plant cultivation year-
round. Features 2000D thick Oxford canvas lined with inner diamond patterned
mylar that maximizes grow light luminosity, and a reinforced frame with 150
lb. weight capacity.
Grow Lights A commercial level LED grow lamp designed to simulate outdoor
daytime lighting with a richer light spectrum. Using the latest Samsung LM301H
EVO diodes for unmatched intensity and efficacy, this LED grow system
efficiently produces full-spectrum lighting to enhance all stages of the grow
cycle.
Discover the latest innovations in environmental controls at acinfinity.com 22
WARRANTY
This warranty program is our commitment to you, the product sold by AC
Infinity will be free from defects in manufacturing for a period of two years
from the date of purchase. If a product is found to have a defect in material
or workmanship, we will take the appropriate actions defined in this warranty
to resolve any issues.
The warranty program applies to any order, purchase, receipt, or use of any
products sold by AC Infinity or our authorized dealerships. The program covers
products that have become defective, malfunctioned, or expressively if the
product becomes unusable. The warranty program goes into effect on the date of
purchase. The program will expire two years from the date of purchase. If your
product becomes defective during that period, AC Infinity will replace your
product with a new one or issue you a full refund.
The warranty program does not cover abuse or misuse. This includes physical
damage, submersion of the product in water, incorrect Installation such as
wrong voltage input, and misuse for any reason other than intended purposes.
AC Infinity is not responsible for consequential loss or incidental damages of
any nature caused by the product. We will not warrant damage from normal wear
such as scratches and dings.
Contact our dealers department at dealers@acinfinity.com or
626-838-4656 for more information about
our dealers and distributors program. Contact our customer service department
at support@acinfinity.com or
626-923-6399 for product and warranty
assistance. Our business hours are Monday through Friday, 9:00 am to 5:00 pm
PST.
If you have any issues with this product, contact us and we’ll happily resolve
your problem or issue a full refund!
23
COPYRIGHT © 2024 AC INFINITY INC. ALL RIGHTS RESERVED No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form, in whole or in part, without specific permission from AC Infinity Inc.
www.acinfinity.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>