AC INFINITY CTR63A Wireless Remote Fan Controller User Manual
- June 6, 2024
- AC Infinity
Table of Contents
CONTROLLER 63
WIRELESS VARIABLE CONTROLLER
USER MANUAL
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service. If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com and click contact for our contact information.
EMAIL
support@acinfinity.com
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA
MANUAL CODE WSC2108X1
PRODUCT
CONTROLLER 63| MODEL
CTR63A| UPC-A
819137021730
---|---|---
PRODUCT CONTENTS
| WIRELESS VARIABLE
CONTROLLER
(x1)
---|---
| WIRELESS
RECEIVER
(x1)
| MOLEX
ADAPTER
(x1)
| AAA
BATTERIES
(x2)
| WOOD SCREWS
(WALL MOUNT)
(x2)
INSTALLATION
STEP 1
Plug your device’s USB type-C connector into the wireless receiver.
FOR DEVICES WITH MOLEX CONNECTORS : If your device uses a 4-pin Molex
connector instead of USB Type-C, please use the included Molex adapter. Plug
the device’s 4-pin Molex connector into the adapter, then plug the wireless
receiver into the USB type-C end of the adapter.
STEP 2
Insert the two AAA batteries into the wireless receiver controller.
STEP 3
Adjust the sliders on the controller and receiver so that their numbers match.
Close the controller’s battery door when you are finished. The receiver’s
indicator light will flash when connected.
Any number of devices may be controlled using the same controller, as long as
the fans’ sliders match the controller’s.
Any number of controllers may control the same device, as long as the
controllers’ sliders match the fans.
CONTROLLER MOUNTING
WALL MOUNTING
Use the mounting hole located on the back of the controller and receiver for
the wall mount.
MAGNET MOUNTING
Use the magnet located next to the mounting hole to mounting the controller
and receiver.
SPEED CONTROLLER
LIGHT INDICATOR
Features ten LED lights to signify the current level. The LEDs will briefly
light up before shutting off. Pressing the button will light up the LEDs.|
---|---
ON
Press the button will turn your device on at level 1. Continue pressing it
to cycle through the ten device levels.
OFF
Hold the button to turn your device off. Press it again to return the
device level back to the last setting. Pressing the button after speed 10 will
also turn your device off.
WARRANTY
This warranty program is our commitment to you, the product sold by AC
Infinity will be free from defects in the manufacturing for a period of two
years from the date of purchase. If a product is found to have a defect in
material or workmanship, we will take the appropriate actions defined in this
warranty to resolve any issues.
The warranty program applies to any order, purchase, receipt, or use of any
products sold by AC Infinity or our authorized dealerships. The program covers
products that have become defective, malfunctioned, or expressively if the
product becomes unusable. The warranty program goes into effect on the date of
purchase. The program will expire two years from the date of purchase. If your
product becomes defective during that period, AC Infinity will replace your
product with a new one or issue you a full refund.
The warranty program does not cover abuse or misuse. This includes physical
damage, submersion of the product in water, incorrect Installation such as
wrong voltage input, and misuse for any reason other than intended purposes.
AC Infinity is not responsible for consequential loss or incidental damages of
any nature caused by the product. We
will not warrant damage from normal wear such as scratches and dings.
To initiate a product warranty claim, please contact our customer service team at upport@acinfinity.com
If you have any issues with this product, contact us and we’ll happily resolve your problem or issue a full refund.
COPYRIGHT © 2021 AC INFINITY INC. ALL RIGHTS RESERVED
No part of the materials including graphics or logos available in this booklet
may be copied, photocopied, reproduced, translated, or reduced to any
electronic medium or machine-readable form, in whole or in part, without
specific permission from AC Infinity Inc.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Documents / Resources
| AC
INFINITY CTR63A Wireless Remote Fan
Controller
[pdf] User Manual
CTR63A, 2AXMF-CTR63A, 2AXMFCTR63A, CTR63A Wireless Remote Fan Controller,
Wireless Remote Fan Controller, Fan Controller, Controller
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>