AC INFINITY AC-WFS12 Wall And Floor Circulator Fan User Manual
- June 6, 2024
- AC Infinity
Table of Contents
AC-WFS12 Wall And Floor Circulator Fan
User Manual
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and
friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us.
Visit www.acinfinity.com and click contact for
our contact information.
EMAIL
[email protected]| WEB
www.acinfinity.com| LOCATION
Los Angeles, CA
---|---|---
PRODUCT
CLOUD LIFT S12
CLOUD LIFT S14
CLOUD LIFT S20
CLOUD LIFT S24| MODEL
AC-WFS12
AC-WFS14
AC-WFS20
AC-WFS24| UPC-A
819137022263
819137022430
819137022485
819137022492
---|---|---
Power this fan OFF before unplugging it. Do NOT place this fan near open bodies of water.
KEY FEATURES
EC MOTOR
Next-generation motor runs quieter, is more energy-efficient, and has a longer
lifespan than AC motors.
IP-44 PROTECTION
This industrial wall fan is sealed to Ingress Protection 44 standards, rated
with high resistance to liquids and dust.
RUGGED BUILD
Black powder-coated steel fan guard supported by a rigid floor stand cages the
fan blades for long-lasting performance.
DUAL BALL BEARINGS
The motor contains ball bearings with an estimated 67,000-hour lifespan.
Enables the fan to be mounted in any direction.
WIDER COVERAGE
Pivoting fan head on the floor or wall-mounted creates dynamic circulation to
direct airflow in a wide range. 
SPEED CONTROLLER
Single-button controller with circular dot display wirelessly enables fan
speed control in ten speeds.
PRODUCT CONTENTS
INSTALLATION
MOUNTING
STEP 1
Mark the drilling holes in your chosen mounting location using the wall-hang
bracket.
Make sure your chosen mounting location is structurally sound and free of
obstruction.
STEP 2
Drill the two holes into your marked locations and apply the wall anchors.
STEP 3
Replace the bracket and drill the screws into your wall to secure it.
STEP 4
Pull the stand vertically and hook the fan onto the bracket.
STEP 5
As an option, you may install wall hang screws to mount your controller and
receiver.
Drill holes into your marked location and apply the wall anchors.
STEP 6
Apply the screws into the wall anchors. Hang your controller and receiver by
the hole located behind each module.
POWERING AND SETUP
STEP 1
Plug the fan’s UIS™ cable into the receiver.
You may magnetically mount the receiver in the controller slot.
STEP 2
Insert the two AAA batteries into the wireless controller.
STEP 3
Adjust the sliders on the controller and receiver so their numbers match.
Close the battery door when you are finished. The receiver’s indicator light
will flash when connected.
Any number of devices may be controlled using the same controller, as long as
the fans’ sliders match the controller’s.
Any number of controllers may control the same device, as long as the
controllers’ sliders match the fans.
STEP 4
Plug the fan’s power cord into an AC power outlet to power the fan.
PROGRAMMING
AC INFINITY PRODUCTS
Inline Fans
The CLOUDLINE series is a line of duct fans designed to quietly ventilate AV
rooms and closets, as well as various DIY air circulation and exhaust
projects. Features a thermal controller with intelligent programming that
will automatically adjust duct fan speeds in response to changing
temperatures.
Ducting Tubes
The four-layer ducting tube is used to direct airflow, designed for
ventilation systems in applications like HVAC, dryers, and grow rooms. It is
highly durable and flexible and can be used anywhere from tight spaces to
wide-open areas.
Shutter Fans
The AIRLIFT series is a line of shutter exhaust fans designed to expel heat,
moisture, odor, and dust from spaces like greenhouses, garages, attics, and
sheds. It features an intelligent controller that includes temperature and
humidity programming, adjustable fan speed controls, a timer, and an alarm
system.
Crawlspace Fans
The AIRTITAN is a line of weather-proof fans designed to provide ventilation,
as well as odor and moisture control for crawl spaces and basements.
Discover the latest innovations in cooling and ventilation atacinfinity.com
WARRANTY
This warranty program is our commitment to you, the product sold by AC
Infinity will be free from defects in the manufacturing for a period of two
years from the date of purchase. If a product is found to have a defect in
material or workmanship, we will take the appropriate actions defined in this
warranty to resolve any issues.
The warranty program applies to any order, purchase, receipt, or use of any
products sold by AC Infinity or our authorized dealerships. The program covers
products that have become defective, malfunctioned, or expressively if the
product becomes unusable. The warranty program goes into effect on the date of
purchase. The program will expire two years from the date of purchase. If your
product becomes defective during that period, AC Infinity will replace your
product with a new one or issue you a full refund.
The warranty program does not cover abuse or misuse. This includes physical
damage, submersion of the product in water, incorrect Installation such as
wrong voltage input, and misuse for any reason other than intended purposes.
AC Infinity is not responsible for consequential loss or incidental damages of
any nature caused by the product. We will not warrant damage from normal wear
such as scratches and dings.
To initiate a product warranty claim, please contact our customer service team
at [email protected]
If you have any issues with this product, contact us and we’ll happily resolve your problem or issue a full refund!
COPYRIGHT © 2021 AC INFINITY INC. ALL RIGHTS RESERVED
No part of the materials including graphics or logos available in this booklet
may be copied, photocopied, reproduced, translated or reduced to any
electronic medium or machine-readable form, in whole or in part, without
specific permission from AC Infinity Inc.