EZVIZ 0235C8KY Pan and Tilt Wi-Fi Camera User Guide

0235C8KY Pan and Tilt Wi-Fi Camera

“`html

Specifications:

• Camera Quantity: 1
• Power Adapter Quantity: 1
• Power Cable Quantity: 1
• Screw Components Set Quantity: 1
• Mounting Plate Set Quantity: 1
• Product Documents Set Quantity: 1

Product Information:

The Pan&Tilt Wi-Fi Camera comes in different types (A, B, C)
with varying features such as different indicators, lens types,
microphone, reset button, micro SD card slot, speaker, network
interface, power interface (USB-C), and function buttons.

Product Usage Instructions:

1. How to Start a Call?

Press the function button for 2 seconds, and the call will start
after a prompt tone.

2. How to End a Call?

Press the function button again for 2 seconds to end the call.
The key function can be configured in the App.

3. How to Reset the Camera?

Press and hold the RST button for about 3 seconds to reset the
device. Ensure this operation is performed within 10 minutes after
the device is connected to power.

4. Access Your Camera:

4.1 Option 1: Connect to 2.4GHz Wi-Fi

1. Connect your mobile phone to the 2.4GHz Wi-Fi network.
2. Download and install the app.
3. Follow the on-screen instructions to add and manage the
   device.

4.2 Option 2: Connect to Wired Network

Before you begin, ensure that the device is connected to power
and a router using a network cable. Follow these steps:

1. Open your browser and input the IP address of your camera in
   the address bar.

2. Enter the default username and password, then click Login.

FAQ:

Q: How do I know if my camera is connected properly?

A: The indicator status will provide information on the camera’s
connectivity. For example, steady red indicates connected to power,
blinking blue indicates connecting to network.

Q: What should I do if my Micro SD card gets damaged?

A: Be sure to disconnect power before inserting or removing the
Micro SD card to prevent damage. Ensure the card is purchased
separately.

“`

Pan&Tilt Wi-Fi Camera Quick Guide
V1.02

1 Packing List
Contact your local dealer if the package is damaged or incomplete. The package contents may vary with device model.

No.

Name

Qty

Unit

1

Camera

2

Power adapter

3

Power cable

4

Screw components

5

Mounting plate

6

Product documents

2 Appearance
Type A:

1

PCS

1

PCS

1

Set

1

Set

1

Set

1

Set

Type B:

Indicator PT lens MIC RST button (3s) Micro SD card slot
Indicator White light lens PT lens MIC RST button (3s) Micro SD card slot

Speaker
Network interface Power interface (USB-C) Function button
Speaker
Network interface Power interface (USB-C)

1

Type C:

Indicator White light lens
PT lens MIC

Speaker

RST button (3s) Micro SD card slot Fixed lens

Network interface Power interface (USB-C)

1 How to start a call?
Press the function button for 2s, and the call starts after a prompt tone. 2 How to end a call?
Press the function button again for 2s to end the call. The key function can be configured in the App. 3 How to reset the camera?
Press and hold the RST button for about 3 seconds to reset the device and make sure this operation is performed within 10 minutes after the device is connected to power.

NOTE!
The appearance and interfaces are for illustrative purpose only. The actual may vary with device model.

CAUTION!
Be sure to disconnect power before inserting or removing the Micro SD card (purchased separately); otherwise, it may be damaged.

3 Indicator status

Indicator status Description

Steady red Blinking red
Steady blue Blinking blue

Connected to power Resetting; Startup completed and waiting to receive configuration information Connected to server; playing live video Connecting to network; not connected to server

2

4 Access Your Camera
4.1 Option 1: Connect to 2.4GHz Wi-Fi
1. Connect your mobile phone to the 2.4GHz Wi-Fi network. 2. Download and install the app. 3. Follow the on-screen instructions to add and manage the device. CAUTION! Connect Manually: Tap Connect Manually, and then use the fixed lens to scan the QR code in the app(for dual camera model only).
10-20cm
4.2 Option 2: Connect to Wired Network
Before you begin, check that: Connect the device to power and a router using a network cable.
Follow these steps to access your camera through the Web: 1. Open your browser, input the IP address (192.168.1.13 by default) of your camera in the
address bar and then press Enter to open the login page. 2. Enter the username and password (admin/123456 by default) and then click Login.
3

NOTE!
· DHCP is enabled by default. If a DHCP server is used in your network, your camera may be
assigned an IP address, and you need to use the assigned IP address to log in.
· You may need to install a plug-in at your first login. Please follow the on- screen instructions to
complete the installation and then open the browser again to log in.
· The default password is intended only for your first login. To ensure security, please change the
password after your first login. You are strongly recommended to set a strong password of at least nine characters including all three elements: digits, letters and special characters.
· If the password has been changed, please use the new password to log in. 5 Mount Your Camera
NOTE!
· PT lens direction: It can be adjusted manually or by PT control function in the app or Web
interface.
· Fixed lens direction: It can only be adjusted manually. 5.1 Option 1: Ceiling Mount
4

5.2 Option 2: Place on Desktop
NOTE! Please place the device on the edge of a table or elevate the device to ensure that the lens is not blocked.
5

Disclaimer and Safety Warnings
Copyright Statement
No part of this manual may be copied, reproduced, translated or distributed in any form or by any means without prior consent in writing from our company (referred to as us hereafter). The product described in this manual may contain proprietary software owned by our company and its possible licensors. Unless permitted, no one is allowed to copy, distribute, modify, abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer, or sublicense the software in any form or by any means.
Export Compliance Statement
Our company complies with applicable export control laws and regulations worldwide, including that of the People’s Republic of China and the United States, and abides by relevant regulations relating to the export, re-export and transfer of hardware, software and technology. Regarding the product described in this manual, our company asks you to fully understand and strictly abide by the applicable export laws and regulations worldwide.
Privacy Protection Reminder
Our company complies with appropriate privacy protection laws and is committed to protecting user privacy. You may want to read our full privacy policy at our website and get to know the ways we process your personal information. Please be aware, using the product described in this manual may involve the collection of personal information such as face, fingerprint, license plate number, email, phone number, GPS. Please abide by your local laws and regulations while using the product.
About This Manual This manual is intended for multiple product models, and the photos, illustrations, descriptions, etc,
in this manual may be different from the actual appearances, functions, features, etc, of the product. This manual is intended for multiple software versions, and the illustrations and descriptions in this
manual may be different from the actual GUI and functions of the software. Despite our best efforts, technical or typographical errors may exist in this manual. Our company
cannot be held responsible for any such errors and reserves the right to change the manual without prior notice. Users are fully responsible for the damages and losses that arise due to improper operation. Our company reserves the right to change any information in this manual without any prior notice or indication. Due to such reasons as product version upgrade or regulatory requirement of relevant regions, this manual will be periodically updated.
Disclaimer of Liability To the extent allowed by applicable law, in no event will our company be liable for any special,
incidental, indirect, consequential damages, nor for any loss of profits, data, and documents. The product described in this manual is provided on an “as is” basis. Unless required by applicable
law, this manual is only for informational purpose, and all statements, information, and recommendations in this manual are presented without warranty of any kind, expressed or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for a particular purpose, and noninfringement. Users must assume total responsibility and all risks for connecting the product to the Internet, including, but not limited to, network attack, hacking, and virus. We strongly recommend that users take all necessary measures to enhance the protection of network, device, data and personal information. Our company disclaims any liability related thereto but will readily provide necessary security related support. To the extent not prohibited by applicable law, in no event will our company and its employees, licensors, subsidiary, affiliates be liable for results arising out of using or inability to use the product or service, including, not limited to, loss of profits and any other commercial damages or losses, loss of data, procurement of substitute goods or services; property damage, personal injury, business
6

interruption, loss of business information, or any special, direct, indirect, incidental, consequential, pecuniary, coverage, exemplary, subsidiary losses, however caused and on any theory of liability, whether in contract, strict liability or tort (including negligence or otherwise) in any way out of the use of the product, even if our company has been advised of the possibility of such damages (other than as may be required by applicable law in cases involving personal injury, incidental or subsidiary damage). To the extent allowed by applicable law, in no event shall our total liability to you for all damages for the product described in this manual (other than as may be required by applicable law in cases involving personal injury) exceed the amount of money that you have paid for the product.
Network Security
Please take all necessary measures to enhance network security for your device. The following are necessary measures for the network security of your device: Change default password and set strong password: You are strongly recommended to change the
default password after your first login and set a strong password of at least nine characters including all three elements: digits, letters and special characters. Keep firmware up to date: It is recommended that your device is always upgraded to the latest version for the latest functions and better security. Visit our official website or contact your local dealer for the latest firmware. The following are recommendations for enhancing network security of your device: Change password regularly: Change your device password on a regular basis and keep the password safe. Make sure only the authorized user can log in to the device. Enable HTTPS/SSL: Use SSL certificate to encrypt HTTP communications and ensure data security. Enable IP address filtering: Allow access only from the specified IP addresses. Minimum port mapping: Configure your router or firewall to open a minimum set of ports to the WAN and keep only the necessary port mappings. Never set the device as the DMZ host or configure a full cone NAT. Disable the automatic login and save password features: If multiple users have access to your computer, it is recommended that you disable these features to prevent unauthorized access. Choose username and password discretely: Avoid using the username and password of your social media, bank, email account, etc, as the username and password of your device, in case your social media, bank and email account information is leaked. Restrict user permissions: If more than one user needs access to your system, make sure each user is granted only the necessary permissions. Disable UPnP: When UPnP is enabled, the router will automatically map internal ports, and the system will automatically forward port data, which results in the risks of data leakage. Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping have been enabled manually on your router. SNMP: Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended. Multicast: Multicast is intended to transmit video to multiple devices. If you do not use this function, it is recommended you disable multicast on your network. Check logs: Check your device logs regularly to detect unauthorized access or abnormal operations. Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized physical access. Isolate video surveillance network: Isolating your video surveillance network with other service networks helps prevent unauthorized access to devices in your security system from other service networks.
Safety Warnings
The device must be installed, serviced and maintained by a trained professional with necessary safety knowledge and skills. Before you start using the device, please read through this guide carefully and make sure all applicable requirements are met to avoid danger and loss of property. Storage, Transportation, and Use
7

Store or use the device in a proper environment that meets environmental requirements, including
and not limited to, temperature, humidity, dust, corrosive gases, electromagnetic radiation, etc. Make sure the device is securely installed or placed on a flat surface to prevent falling. Unless otherwise specified, do not stack devices. Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow
adequate space for ventilation. Protect the device from liquid of any kind. Make sure the power supply provides a stable voltage that meets the power requirements of the
device. Make sure the power supply’s output power exceeds the total maximum power of all the
connected devices. Verify that the device is properly installed before connecting it to power. Do not remove the seal from the device body without consulting our company first. Do not attempt
to service the product yourself. Contact a trained professional for maintenance. Always disconnect the device from power before attempting to move the device. Take proper waterproof measures in accordance with requirements before using the device outdoors.
Power Requirements Install and use the device in strict accordance with your local electrical safety regulations. Use a UL certified power supply that meets LPS requirements if an adapter is used. Use the recommended cordset (power cord) in accordance with the specified ratings. Only use the power adapter supplied with your device. Use a mains socket outlet with a protective earthing (grounding) connection. Ground your device properly if the device is intended to be grounded. Battery Use Caution When battery is used, avoid:
Extremely high or low temperature and air pressure during use, storage and transportation; Battery replacement. Use the battery properly. Improper use of the battery such as the following may cause risks of fire,
explosion or leakage of flammable liquid or gas. Replace battery with an incorrect type; Dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery; Dispose of the used battery according to your local regulations or the battery manufacturer’s
instructions. Avertissement de l’utilisation de la batterie Lorsque utiliser la batterie, évitez: Température et pression d’air extrêmement élevées ou basses pendant l’utilisation, le stockage
et le transport. Remplacement de la batterie. Utilisez la batterie correctement. Mauvaise utilisation de la batterie comme celles mentionnées ici,
peut entraîner des risques d’incendie, d’explosion ou de fuite liquide de gaz inflammables. Remplacer la batterie par un type incorrect; Disposer d’une batterie dans le feu ou un four chaud, écraser mécaniquement ou couper la
batterie; Disposer la batterie utilisée conformément à vos règlements locaux ou aux instructions du fabricant
de la batterie.
Regulatory Compliance
FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
8

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
LVD/EMC/RE Directive This product complies with the European Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU and RE Directive 2014/53/EU.
WEEE Directive­2012/19/EU
The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of in a responsible manner.
Battery Regulation- (EU) 2023/1542
Battery in the product complies with the European Battery Regulation (EU) 2023/1542. For proper recycling, return the battery to your supplier or to a designated collection point.
IC Statement This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Innovation, Sciences et Dé-veloppement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement est conforme aux limitedevraits d’exposition aux rayonnements CNR-102 établies pour un environnement non contrôlé.
9

Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
10

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>