FOREVER Aw-110 Amoled Icon Smartwatch User Manual

FOREVER Aw-110 Amoled Icon Smartwatch

Thank you for purchasing a product by Forever. Before use, please refer to the User’s manual, and save it for future reference. Do not disassemble the device on your own – all repairs should be done by a service technician. Use only original parts and accessories provided by the manufacturer. We hope that the product by Forever fulfills your expectations.

DESCRIPTION

1. Main button
2. Touch panel/display
3. Thermometer
4. Heart rate monitor
5. Charging connector

BASIC SPECIFICATION

• Waterproof: IP68
• Battery capacity: 240 mAh
• Bluetooth: 5.0
• Charging time: 2 hours
• Standby time: up to 10 days

SAFETY NOTES

• Avoid impacts between the device and hard objects since this may damage the device
• Avoid contact of the device with solvents or other chemicals
• Keep away from strong magnetic fields
• Avoid contact of the smartwatch with water if the water temperature exceeds 35˚C
• Do not repair the device on your own
• Do not throw it into the fire, there is a risk of an explosion

FIRST LAUNCHING

When using the device for the first time, take it out of the package and charge it using the supplied charging station. Correct connection will be indicated by vibrations and the display of an icon that shows the battery charging status. The date and time of the device will be automatically synchronized and set after establishing a connection with a dedicated application via Bluetooth. The language of the device will be automatically adapted to the one set in the phone

CHARGING

Place the smartwatch on the dedicated docking station in a way to connect charging connectors together, and then connect the USB cable to a power source.
After completion of the charging process, disconnect the smartwatch from the power source.

TURNING THE SMARTWATCH ON/OF

• Turning on: Press and hold the main button for 5 seconds until the smartwatch activates, which will be indicated by vibrations.
• Turning off: Scroll the main screen down to open a pop-up menu and select the symbol, and then confirm the inactivation of the smartwatch.

FOREVER GOFIT APPLICATION INSTALLATION

Find the application “Forever GoFit” in Google Play or App Store and install it. You may also scan the QR code located on the package.

NOTE:
The operating system of the phone must have the following minimum specifications to run the application and support the smartwatch: Android 5.1 or higher, iOS 10.0 or higher.

CONNECT THE SMARTWATCH TO THE PHONE

1. Activate Bluetooth in your phone
   NOTE: To be able to use all functions of the application and the smartwatch, during the first launching, allow the application to access all required functions, and then also activate access to notifications in settings.

2. Activate “Forever GoFit” on the phone.
   Start using the application as a “Guest” by clicking the upper right part of the screen or select “Register” and follow the steps below:

   • enter the email address you want to use to create an account
   • Press the button (obtain verification)
   • a verification code, which must be entered in the indicated field, will be sent to your email
   • enter and remember your user password

3. After logging into the application, you will see the main screen, in which you should click a button or select the menu in the upper left corner.

4. Select the smartwatch model you want to connect with by clicking its picture:

5. Confirm the selected model by clicking “YES”. If a wrong model has been selected, click “NO” and select the correct one.

6. Select the “AW-110” model from the list of devices and confirm the connection by pressing “YES”. The connection will be established within several seconds and all data will be automatically synchronized. If the automatic synchronization won’t start, select the button in the lower right corner of the screen to perform a manual synchronization.

DESCRIPTION OF THE APPLICATION

User’s profile information
After correctly logging in and carrying out synchronization, press the menu button in the upper left corner, and then click the user name to enter the profile setting. Here, check whether all the data is correct. Providing actual data is necessary for the correct operation of the algorithm that calculates your steps, calories, and covered distance with the highest possible accuracy.

DESCRIPTION OF THE MAIN PANEL

1. Menu button
   Expands the user’s panel that allows to carry out settings described in subsection 1.1:

2. Settings

3. User’s information Click it to change settings, such as profile photo, user name, sex, date of birth, height, weight, change password

4. Settings and functions of the device
   Access to extended information, settings, and functions of the smartwatch, such as information regarding the date of last synchronization, information regarding the current version of the software, information regarding MAC number of the device, remote camera, alarm clock, notification regarding lack of exercise, reminders about hydration, hand on which the smartwatch is worn, the automatic backlight of the screen via wrist movement, daily heart rate monitoring, notifications from the application, settings reset, 8 EN disconnection of the smartwatch and the application.

5. Select one of the clocks faces and send it to the smartwatch

6. Measurement units
   Select the units of measurement you want to receive

7. Temperature
   Select the temperature units used to

8. Find the smartwatch
   Click to call the smartwatch, which will start to vibrate in order to notify you about its current location

9. Connection with Google and Facebook accounts
   Connect the application with Google or Facebook account to enable sharing data gathered in the application 1.1.8. Logout Click to logout from the currently used application account

10. Strava
    It allows to connect with an account in Strava application and send information to the account from the smartwatch

11. Privacy policy
    Read the privacy policy and accept it in order to protect your data

12. Update
    Check if the smartwatch has the latest version of the software. If not, update you smartwatch to fully use all available functions.

13. FAQ
    Most frequently asked questions and answers

14. Application information
    Shows the current application version.

15. Number of steps
    Shows the number of steps taken in a given day and the degree of completion of an assumed goal. Click to go to more detailed data or check its history.

16. Weekly training
    Shows detailed data regarding training, broken down into particular weeks.

17. Heart rate monitor
    Readout of daily heart rate measurement and the dynamic heart rate The daily heart rate section is responsible for periodic measurements of the heart rate during the whole day. The smartwatch carries out automatic measurements after the user activates the function in the device settings in the application.

18. Sleep monitoring
    To carry out a measurement or sleep analysis, wear the smartwatch for the entire night. The device will prepare a sleep schedule based on the user’s motions during sleep.

19. GPS sport mode
    Measurement of the selected sports discipline, including recording of the route using the smartphone’s built-in GPS module.
    Click the icon to go to the map, select the sport, and then press start to begin measurements.

20. Weather
    Current weather in a given town.

21. Calories, Distance, Exercise Time
    Data is collected from particular measurements from a given day. After clicking the requested measurement, we go to its history.

22. Activity
    Shows activity during a given day, broken down into hours.

23. Temperature
    Displays the latest body temperature measurement. After clicking, it shows the collected data from temperature measurements on individual days, distinguishing the highest and lowest temperature.

THE SMARTWATCH INTERFACE DESCRIPTION

Note:
To set a given clock face, scroll the touch screen left. After a moment, the correct setting will be indicated by a green symbol visible in the center of the display.

Smartwatch faces
Choose one of the dials available from the smartwatch. You can also upload an additional fourth watch face chosen from all available in the app.

Note: scroll the touch screen right to go to the list of particular functions presented below:

Daily activity
Select to see data regarding the number of steps, covered distance, and burnt calories in a given day

Temperature
Select to measure body and skin temperature. The measurement starts automatically and vibrates when finished.

Sports
Select one of the available activities to measure.

Heart Rate
Select to carry out a heart rate measurement in a given moment. The measurement will start automatically, and its completion will be indicated via vibrations.

Sleep
The sleep time was recorded during the last EN night.

Music
Select to control the music on your smartphone from the watch.

Weather
The current weather forecast. The data is taken from the Forever GoFit application. An active connection with the application is required to update.

Stopwatch
Select to start the stopwatch feature.

Timer
Select to start the timer function.

Messages
Preview of recently received messages and notifications from applications to which the smartwatch has been accessed through the settings of the Forever GoFit application

Find phone
The function allows you to start the vibration in the phone connected to the smartwatch. Makes it easy to find.

Relax
Select to start breathing exercises. The device will indicate the rhythm of your inhalation and exhalation.

Settings
Go to the settings of the smartwatch, where you will be able to define the screen brightness and activate or deactivate vibrations. In the System Information section, you will find the settings and system names of the software.

NOTE:
SWIPE THE TOUCH SCREEN DOWN TO ENTER THE QUICK MENU, WHERE YOU CAN FIND THE FOLLOWING FUNCTIONS

Do not disturb
Select to turn Do Not Disturb mode on or off.

Settings
Go to the smartwatch settings from which you can define the screen brightness and enable or disable vibrations. The System Information section lists the settings and system names of the software.

Always on mode
Select to switch the smartwatch to Always on display mode. In this mode, the time, date, battery level, and Bluetooth connection status will be visible on the smartwatch screen for a specified period of time without the need to wake up with a movement of the wrist or a button.

Find phone
The function allows you to start vibrating on the phone connected to the smartwatch. This makes it easier to find.

Time, status, battery
Quick view of the time, Bluetooth connection status, and battery level.

Maximum radio frequency power emitted in the frequency range

Frequency range| Bluetooth 2402-2480 MHz
Maximum emitted power| 7,13 dBm EiRP

PROPER DISPOSAL OF USED EQUIPMENT

This device is marked with a crossed-out garbage container symbol, in accordance with the European Directive 2012/19EU on Waste Electrical and Electronic Equipment (WEEE). Products marked with this symbol should not be disposed of or discarded with other household waste at the end of their service life. The user is obliged to dispose of waste electrical and electronic equipment by delivering it to a designated point, where such hazardous waste is recycled. The collection of this type of waste in separate locations and the proper recovery process contribute to the conservation of natural resources. Proper recycling of waste electrical and electronic equipment is beneficial to human health and the environment. For information on where and how to dispose of used electronic equipment in an environmentally safe manner, the user should contact the relevant local authority, the collection point or the point of sale where the equipment was purchased.

PROPER DISPOSAL OF USED BATTERY

In accordance with EU Directive 2006/66/EC, as amended by Directive 2013/56/EU on the disposal of batteries, this product is marked with a crossed-out garbage container symbol. This symbol means that the batteries used in this product should not be disposed of with ordinary household waste, but handled in accordance with the directive and local regulations. Do not dispose of batteries with unsorted municipal waste. Battery users must use the available collection networks for these items, which allows for their return, recycling, and disposal. Within the EU, the collection and recycling of batteries are governed by separate procedures. To learn more about existing battery recycling procedures in your area, contact your city hall, waste management agency, or landfill.

DECLARATION OF CONFORMITY WITH EUROPEAN UNION DIRECTIVES

TelForceOne Sp. z o.o. hereby declares that the ICON II Forever AW-110 is in compliance with Directive 2014/53 / EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.manual.forever.eu/AW-110.

www.forever.eu.

References

• Urządzenia mobilne, technologiczne, ubieralne – Sprzęt elektroniczny, elektronika użytkowa | Sklep Forever
• Forever - portal z instrukcjami obsługi
• Forever - portal z instrukcjami obsługi

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>