qnect QN-WP06 447001116 WiFi Smart Plug, WiFi Smart Plug User Manual
- June 3, 2024
- qnect
Table of Contents
qnect QN-WP06 447001116 WiFi Smart Plug, WiFi Smart Plug
Description
- – 4 : On/off button / Reset button / On off indicator Connection status indicator
Use
- Download and install the app “qnect home“ from Apple App Store or Google Play Store on your mobile device.
- Launch the app “qnect home”.
- Create a new account or log in to your existing account.
- Plug in the smart power plug.
- Tap “+” to add the device.
- When bluetooth is enabled on your smartphone the app will find the device itself. Follow the installation steps within the app.
- When bluetooth is not enabled, follow below steps.
- Select Comfort > QN-WP06 from the list of products.
- If the status indicator does not flash: Press and hold the reset button for 5-10 seconds.
- If the light flashes: Confirm in the app.
- Confrm the Wi-Fi network and password.
- Enter the device name.
Note: The device name will also be used by Amazon Alexa and Google Home.
Safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
- The device is suitable for outdoor use, but do not expose the device to constant running water
Warning!
- We are continuously improving and updating our products and product information. It’s therefore possible that there is a slight difference between the description in this manual to the operation of the product. If something is different or not clear, always check our website for the most current manual version.
- The functionality of WiFi connected product depends on the stability of your home network. We are not responsible for the stability and capability of your private network, and therefore the optimal functionality of our products. If any questions about your private WiFi network, contact your WiFi providor.
- Do not exceed the maximum load of 16A or 3600W.
- Do not use cleaning solvents or abrasives. Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Input voltage 230V~ 50Hz Max.
- Power plug Schuko Type F (CEE)
- Max. power output 3680W – 16A
- Frequency range 2400 – 2482.5 MHz
- Antenna gain : 1dBi
- Max. radio transmit power 20 dBmClean the outside of the device using a soft, damp cloth.
Support ? > www.qnecthome.com <
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>