DEWALT NA268547 12/20V MAX Battery Charger User Manual
- June 15, 2024
- Dewalt
Table of Contents
DEWALT NA268547 12/20V MAX Battery Charger
Product Information
Specifications
- Charging Type: Cordless
- Charging Method: 2-Stage Charging
- Battery Type: Lithium-ion
Product Usage Instructions
Charging a Battery
To ensure maximum performance and life of lithium-ion battery packs, follow
these steps to charge the battery pack:
- Plug the charger into an appropriate outlet before inserting the battery pack.
- Insert the battery pack into the charger, making sure the indicators align.
- The charging process consists of two stages:
- Stage 1 Charging: The stage 1 indicator will light up.
- Stage 2 Charging: The stage 2 indicator will light up.
- Fully Charged: The fully charged indicator will light up once the battery pack is fully charged.
- *Hot/Cold Pack Delay:** During this process, the red indicator will continue to flash, and a yellow indicator will also light up. Once the battery pack reaches the appropriate temperature, the yellow indicator will turn off and the charger will resume the charging process.
*Note: The hot/cold pack delay feature helps protect the battery pack from extreme temperatures during charging.
Frequently Asked Questions (FAQ)
-
Q: Can I use any other battery packs with this product?
A: No, using any other battery packs may create a risk of injury and fire. It is recommended to use only the specified lithium-ion battery packs. -
Q: What should I do before using any accessory with the tool?
A: Before using any accessory, it is important to read the tool instruction manual for your own safety. Failure to do so may result in serious personal injury and damage to the tool and accessory.
WARNING:
- NOTE: The following information replaces the information printed in the instruction manual. Keep this addendum with your instruction manual.
- WARNING: For your own safety, read the tool instruction manual before using any accessory. Failure to heed these warnings may result in serious personal injury and damage to the tool and the accessory.
- WARNING: Use of any other battery packs may create a risk of injury and fire.
Charging a Battery
NOTE: To ensure maximum performance and life of lithium‑ion battery
packs, charge the battery pack fully before first use.
- Plug the charger into an appropriate outlet before inserting battery pack.
- Insert the battery pack 1 into the charger, making sure the battery pack is fully seated in the charger. The red (charging) light will blink repeatedly indicating that the charging process has started.
- The Stage 1 Charging blink indicator represents the charge process that charges the majority of the battery’s capacity. Stage 2 Charging blink indicator represents the remainder, or top off charge process, for the battery to reach full capacity.
- The completion of charge for Stage 1 or Stage 2 will be indicated by the Stage’s light remaining ON continuously. The battery pack is fully charged when both Stage 1 and Stage 2 Charging lights remain ON continuously, and it may be removed and used at this time or left in the charger.
NOTE: To remove the battery pack, some chargers require the battery pack release button 2 to be pressed. Refer to the indicators below for the charge status of the battery pack.
Indicators
The red light will continue to blink, but a yellow indicator light will be
illuminated during this operation. Once the battery pack has reached an
appropriate temperature, the yellow light will turn off and the charger will
resume the charging procedure. The compatible charger(s) will not charge a
faulty battery pack. The charger will indicate faulty battery by refusing to
light.
NOTE: This could also mean a problem with a charger. If the charger
indicates a problem, take the charger and battery pack to be tested at an
authorised service centre.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>