NOTIFIER AFP-200 Dress Panel Backbox Instruction Manual
- June 12, 2024
- NOTIFIER
Table of Contents
NOTIFIER AFP-200 Dress Panel Backbox
Product Information
The AFP-200 Door, Backbox, and Dress Panel Assembly is a component of the AFP-200 fire alarm control panel system.
AFP-200 Door:
The door is a part of the assembly that provides access to the internal
components of the fire alarm control panel. It is designed to fit securely
onto the backbox.
AFP-200 Backbox:
The backbox is a housing unit that holds the fire alarm control panel and
other necessary components. It provides protection and support for the
internal components.
AFP-200 Dress Panel:
The dress panel is an optional decorative cover that can be installed over
the backbox to enhance the aesthetics of the fire alarm control panel system.
AFP-200 Backbox Mounting Dimensions
| Dimension | Measurement |
|---|---|
| Width | 14.50 in. (36.83 cm.) |
| Height | 12.50 in. (31.75 cm.) |
| Thickness | 0.250 in. (0.635 cm.) |
Product Usage Instructions
- Ensure that the AFP-200 Door, Backbox, and Dress Panel Assembly is compatible with your fire alarm control panel system.
- Start by installing the backbox in a suitable location, following the provided mounting dimensions.
- Once the backbox is securely mounted, align the door with the backbox and attach it using the provided fasteners.
- If desired, install the dress panel over the backbox for enhanced aesthetics. Secure it according to the provided instructions.
- Ensure that all components are properly aligned and securely attached.
- Refer to the fire alarm control panel system’s user manual for further instructions on operating and maintaining the system.
Assembly
Carefully unpack the door, backbox, and dress panel and check for shipping
damage. The AFP-200 door, backbox, and dress panel should be assembled as
shown in the drawing below. Refer to the following page for backbox
dimensions. The cabinet should be mounted in a clean, dry, vibration-free area
where extreme temperatures are not encountered. The area should be readily
accessible with sufficient room to easily install and maintain the panel.
Locate the top of the cabinet approximately five feet above the floor with the
hinge mounting on the left. For more information on installation of the
AFP200, refer to the AFP-200 Analog Fire Panel Instruction Manual, Notifier
Document 15511.
Mounting Dimensions
12 Clintonville Road, Northford, CT 06472 203-484-7161 Fax: 203-484-7118
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>