FANTECH Smart RGB Triangle Light Panels User Manual

SMART RGB TRIANGLE LIGHT PANELS
USER MANUAL

Product features

• Flowing RGB
• Music Mode
• IR Control
• App Control
• Voice Control
• WIFI+BT Connection
• Color Adjustment
• DIY Pattern
• Adjustment Dim Light

Specification

• Model: LA1ALP, SLP0103
• LED Color: RGB
• Quantity: 3 pcs
• Max Color:16.7 million
• System Support: i0S, Android
• Triangle Light IP Rating: IP20
• Power: 24V-1A, 24W .Voltage: DC 24V
• Power: 2.5W/piece
• Connection Protocol: IR and WIFI+BLE (2.4GHz b/g/n)

Parts List

Dimension

Product Diagram

Installation

1. You need the SLP0103 Triangle Light Panels Add-On and LA1ALP Smart Triangle Light Controller to complete the installation.

2. Take out all the spare parts and Triangle Light Panels from the box.

3. To ensure all panels light up, make sure all the connectors direction are correct, the ARROW direction must be AWAY from the controller.

4. After you’ve done designing your Triangle Lights, connect the adaptor and download the Fantech Smart Life app (See the “App connection” section for the guide), and check whether the light can be normally lit or not, and all the features can be used normally.

5. Install the clip on every corner of the Triangle Lights, to secure the design and make it fix.

6. Stick the Adhesive Sticker to the backside of the Triangle Lights, stick 3pcs sticker on each Triangle Light to make it stickier on the wall or glass.

7.  Make sure to dean and wipe the surface before you stick the Triangle Lights on the wall or glass. Be careful when you want to move or Install the Triangle Lights,make sure you hold all the Triangle Lights together,to prevent it from broken.

8. Check again all the cable and clip if It’s Installed correctly, then plug the adaptor and enjoy the RGB Light.

Attentions

Please install the Triangle Lights on a dry, dean and smooth surface. It will not be suitable for following conditions.

1. Do not use Adhesive Sticker to fix the Triangle Lights in a humid environments (Such as bathrooms, toilets, etc.)
2. Do not install the product on the ceiling by using the Adhesive Sticker to prevent it from falling
3. The Adhesive Sticker is not suitable for brick walls, rough walls, frosted glass, wall coverings with wallpaper, dusty walls, rough plastic surfaces,and other rough surfaces.

Fantech Smart Life App

1. Search “Fantech Smart Life” App in Apple Store or Google Play
   

2. Or scan this barcode to download the App.

https://a.smart321.com/fantechsmartiot

Minimum device requirement are Android 5.0 and iOS 10.0 with Bluetooth version a V5.0.

Log in/Register an account
Open the Smart APP, sign up for a new account or log in with an existing account.

App Connection

First Method

1. Alter you’ve done install and connect all the cable, don’t forget to tun on yaw Smanphone MI and Bluetooth.
2. After you plug the adaptor, the Triangle Lights will light up, but if it still turns off, then long press the Power button for more than 5sec to reset Triangle Lights.
3. After you cress the Pone button for more than 5sec. the Triangle Lights mil flesh quickly.
4. Open the Fantech Smart Life App, Register and Login, then press “+” on the upper right of the Fantech Sman Lite App.
5. The Triangle Lights WI automatically pop-up, then press “Go to add”.
6. Makeawe that the mangle Lights already been selected (v)
7. Fill in the Win Name arid Password, and make are you also use the sane WFi. Then press “Next”.
8. Walt until It’s successfully connected.

Second Method

1. After you’ve done install and connect all the cable, don’t forget to turn on your Smartphone Wifi and Bluetocth.
2. After you plug the adaptor, the Triangle Lights will light up, but if It still turns off, then lang press the Power button for more than Ssec to reset Triangle Lights.
3. After you press the Power button for more than Ssec, the Triangle Lights will flash quickly.
4. Open the Fantech Smart Life App, Register and Login, then press “+” on the upper fight of the Fantech Smart Life App.
5. Select the Lighting Category, then choose “Smart RGB Triangle Light Panels”.
6. Follow the instructions and tap “next”.
7. Fill in the WiFi Name and Password, and make sure you also use the same WiFi. Then press “Next”.
8. Wait until it’s successfully connected.

App interface

1. Scene Preset

1. Quiet Scene Preset: Film, Dating, Sunset, Christmas
2. Active Scene Preset: Romantic, Colorful, Dynamic, Dream
3. Romantic Scene Preset: Rainbow, Flowing Water

2. Music Mode

1. Rhythm
2. Roll
3. Energy
4. Spectrum

3. Customize Scene

Attentions

1. Do not put any metal around the controller, which could block WiFi signal.
2. Make sure the all the cables, adaptor, and controller are correctly connected.
3. Do not cover anything on the surface of adaptor,controller,and Led Strip. Note: The App interface is subject to the latest version.

Third party control

Fantech Smart Life supports Goog le Assistant and Amazon Alexa. Find the service in the “Me” menu and select “Third-Party Voice Services”, After you select your desire Third-Party Voice Services, follow the Instruction as shown in the app.

How to create a device group or synchronization

1. Tap the device you want to make group or synchronization.
2. Tap the upper right button to enter the device settings.
3. Tap “Create Group”, then select which device you want to make Group with, then tap “Save” button on the upper right.
4. Go Back to the home page, and you will see the device group with “3 squares icon”, then tap it to enter the device group control, and you can control the LED Light and make synchronization.

How to delete/edit a device group or synchronization

1. Tap the device group that you want to delete.
2. Tap the upper right button to enter the device settings.
3. Tap the “Group Device” to edit the device, then tap “Save” on the upper right.
4. Tap the “Dismiss Group” to delete the device group.

How to make Smart Automation

1. On the home page, tap the “Smart” menu on the bottom page.

2. Tap the “+” button on the upper right, and you can choose condition that you need.
   1. Launch Tap-to-Run To control multiple devices or one device with one tap or by using an Al enabled speaker through voice commands.
   2. When weather changes To control multiple devices or one device according to weather /temperature /humidity /Sunset or Sunrise/Wind Speed In your current city or location.

3. Schedule To control multiple devices or one device according to the schedule that you’ve set.

4. When device status changes To control multiple devices or one device according to status of another device that linked to the main device. (For example: If the AC turns off, the bedroom lights will turn off too)
   3. Follow the instruction of each Automation setting.

Note: If you are unable to create a device group, please check in the following ways:

1. Tap on the upper right corner of the device to enter the device settings, and check if you can see the “Create Group” option.
2. If you can see it, tap it, and create a group.
3. If you don’t see “Create Group” option on the device settings page, it means that the device doesn’t support group settings (Not all device support group functions).

IR Remote Control Manual

Product Description You can use the IR Remote Control to control your Smart Flowing RGB Led Strip.
Features

• 19 Buttons
• CR2025 Lithium Battery
• Distance 5-8m

How to use
Remove the plastic battery cover first before use.
Below is the description of each button’s function:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>