FANTECH ALEGRO GS302 RGB Gaming Speaker Instruction Manual
- June 3, 2024
- fantech
Table of Contents
FANTECH ALEGRO GS302 RGB Gaming Speaker
What’s included in the box
- FANTECH ALEGRO GS302 RGB GAMING SPEAKER
- User Manual
System requirements
- Operating systems: PC, Mac, PS{adapter needed)
- One USB 2.0/3.0 port
Instruction manual ®
Thank you for purchasing FANTECH ALEGRO GS302 RGB Gaming Speaker. and FANTECH clear deep ALEGRO sound. GS302 With is the dual essential connections. speaker AUX that and focuses Bluetooth. on what just truly connect matters: and bolo play. need.
Technical specification
-
Driver unit: 52mm
-
Speaker sensitivity: 80dB
-
Frequency response: 100Hz-20kHz
-
Total harmonic distortion: < 10% Impedance: 40
-
Input inferface: 3.5mm+USB
-
Bluetooth version: 5.0
-
Spectrum mode: 5 Output power: 3w*2
-
Working temperature: -20°C to 45°
-
RGB lighting ®
-
USB powered
-
Spectrum Mode
-
Dual Connection
-
52mm dr1ver
How to use
Touch sensor
Tap mode, the touch change up sensor to 4 to mode. change the lighting Hold
the touch sensor to ON/OFF the lighting.
Power scroll
- music Scroll to volume the Right / to the left to tune the – Hold the scroll to turn h ON/between OFF the AUX speakmodeer
- and Press 1 Bluetooth times to mode.switc
Headphone jack in You 3.5mm can switch headphone-to headphone to the one 3.5mm mode by jack plug porf.
How to connect
Connect speaker to computer by inserting USB connector and 3.5mm jack into computer. It is a plug and play, do not need to install any driver to have this headset working.
Warning
Do not attempt to open, service or modify the speaker.
Clean the speaker using only a dry cloth; do not use alcohol or detergent.
Keep it away from fire uptearing conditions
Operating Condition
- Operating temperature:-25 C ~ 65C t 10C
- Storage temperature:-40 C~ 70C + 10C
- Operating humidity: 10-90% rh
- Storage humidify:-5-95% h