Fantech EOS Pro Wireless Gamepad User Manual
- August 31, 2024
- fantech
Table of Contents
Fantech EOS Pro Wireless Gamepad User Manual
What’s included in the box
- EOS PRO WGP15 Gaming Controller
- Set of Replaceable Thumbsticks
- Replaceable D-PAD
- Set Replaceable Precision Aim Rings
- USB Receiver
- USB-C Charging Cable
- User manual
System requirements
- Operating systems: PC/Steam, Switch, iOS, MacOS, tvOS.
- Android, Tesla Vehicles, Cloud Gaming/Game Pass
Thank you for purchasing the Fantech EOS PRO WGP15 Wireless Multi-Platform Gamepad. This gamepad features anti-drift technology achieved through the use of Hall Effect sticks & triggers. Additionally, EOS PRO features an interchangeable D-Pad & thumbsticks with rear macro paddles for easy gameplay. Experience the next level of gamepads!
Technical Specification
- Connectivity: BT 5.0, StrikeSpeed Wireless, Wired • Rumble: Yes (4-level adjustable Rumble)
- Face Button Type: Membrane
- Voltage/Current: 3.7V/ 125mA
- Total Number of Keys: 22
- Programmable Buttons: 12
- Battery: 1000mAh (Up to 18 hours usage)
- Weight: 272g
- Hall-Effect: Analog & trigger
- Wireless Range: 10m
- Sensors: 6-Axis Gyroscope
- Compatibility: PC/Steam, Switch, iOS, MacOS, tvOS,
- Charging Time: Approx. 3 hours
- Android, Tesla Vehicles, Cloud Gaming/Game Pass
- Turbo: Yes (3 level adjustable modes)
Buttons Assignment
- Left Joystick
- Capture Button
- Right Joystick
- Home Button
- Directional Pad
- Select/- Button
- Action Buttons
- Start/+ Button
- Turbo Button
- LB Button
- RB Button
- RT Trigger
- LT Trigger
- Left Rear Paddle
- Right Rear Paddle
- Sync button
- Mode Selector Toggle
- Trigger Lock
LED Indicator
How to Connect
PC & Tesla Vehicles Connection
Connect the gaming controller to your PC by inserting the USB receiver or
Type-C cable to your PC USB port, then switch the toggle to Windows mode. If
not connected, the LED indicator 1&3 will blink. If connected, the LED
indicator 1&3 will bright static color.
To use the gamepad on Tesla, please connect your USB receiver or Type-C cable
to your Tesla USB port, then switch the toggle to Android mode.
Switch Connection
To connect the gamepad to the Switch, ensure the toggle is switched to Switch
mode, and press the sync button, then the gamepad will automatically connect
to your switch. If not connected, the LED indicator 1&4 will blink. If
connected, the LED indicator 1&4 will bright static color.
Android Connection
To connect the gamepad to Android, first confirm that the Android device is
version 10.0 or above, then ensure the gamepad toggle is switched to Android
mode. Then open Bluetooth on your Android device, and press the sync button on
the gamepad. Now it will show “Fantech EOS PRO” as a Bluetooth device, press
it to start pairing. If not connected, the LED indicator 2&3 will blink. If
connected, the LED indicator 283 will bright static color.
iOS Connection
To connect the gamepad to iOS, First confirm that the iOS device has been
upgraded to iOS 13 or above. Then, ensure the gamepad toggle is switched to
iOS mode, and open the Bluetooth on your iOS device. Next, press the Sync
button on your gamepad, and it will show as “Xbox Wireless Controller”, press
it to start pairing. If not connected, the LED indicator 182 will blink. If
connected, the LED indicator 182 will bright static color. The controller only
supports Apple devices in lOS13.0 or above, as well as Apple Store games.
Currently, the controller does not support touch, six-axis, or vibration,
while in use with phones.
How to Use
Turbo Mode
Hold the Turbo button, then press another button that you want to assign. If
you press again, it will trigger Auto Turbo Mode. To clear the Turbo effect,
hold the Turbo button for 5 seconds. You can adjust Turbo speed by holding the
turbo button and pushing the right analog stick up & down. If you push up the
analog stick, it will increase the speed, if you push it down, it will
decrease the speed.
Rumble Mode
You can adjust the rumble intensity by holding the turbo button and pushing
the left analog stick up & down. If you push up the analog stick, it will
increase rumble power, if you push it down, it will decrease the power. There
are 4 levels of rumble (100%-70%-30%-0%).
Lighting Mode
You can adjust the lighting mode by pressing the “+” button & left on the
D-pad. This will allow you to change between 4 lighting modes (Running RGB
Mode, Wake Mode, Breathing Mode, Static Mode). To adjust both Analog & XYAB
lighting brightness, press the “-” button and up on the D-pad. On Static Mode,
use the “+” button & right D-Pad to switch the color to your favorite.
Customizable Rear Triggers
Press and hold the Turbo button and Rear Paddle that you want to assign (left
or right), then the LED 2+3 will begin to light, which indicates that it is
ready to receive input. Next, press the button that you want to assign. and
then press the Rear Paddle again to finish recording the input. To erase the
macro, please press the Turbo button and Rear paddle again. *You can record up
to 63 buttons. If you don’t press anything for 5 minutes when recording, it
will automatically stop inputting the macro.
Trigger Locks
Siding the suite he rigger pull for faster i-game response time by
Interchangeable D-PAD Dre to suit one as it ups and replies by swapping.
Interchangeable Thumbsticks
Contral your gamm, vour way! Smelt pull of the thumbsticks to replace l them
with a higher or lower site, to fit your need!
Interchangeable Thumbsticks
Control your games, your way! Simply pull off the thumbsticks to replace them
with higher or lower size, to fit your needs!
Troubleshooting
-
Gamepad not recognized/not found/not connected
- Check for USB port problems, or change to another USB port.
- Check the Gamepad driver was installed correctly. (If not. please unplug and restart the computer.)
- Precs tome oution ler to secones to ectvole reset leeroy mode.
-
Gamepad not working in the game
-
Be aware that not all games support gamepads
-
Check the game’s settings options for controller configuration.
-
-
No vibration
- Check that the driver was installed correctly.
- Check that the game supports vibration.
-
Charging Indicator Light
The 1-4 LED indicator lights will flash when charging. When the battery power is low, the indicator lights will blink and the gamepad will be unable to be used until it is charged. -
If the gamepad is not in use, the charging time will be around 3.5 to 4.5 hours. When the battery is full, the charging indicator light wil turn off. While using the gamepad, the LED will flash slowly to indicate charging, and when the battery is full, the LEDs will turn to a solid color.
-
To check the battery, press the Turbo button & “-* button. The lights will shine, depending on the amount of charge left. If it shows all lights (1, 2, 3, 4. the gamepad is 763-100% charged. It shows 3 lights (1. 2. 3). it is 51%-75%, while 2 lights (1. 2) means 26%-50%, and 1 Ight (1) is 1%-25%.
-
Calibrate Gamepad
To initiate the calibration process for your gamepad joystick and trigger, please press the Turbo*Home+star/+ button. Once the calibration is complete, kindly press the Select/- button to conclude the calibration. -
Thumbstick & D-pad interchange
To switch the left thumbstick to function as a D-pad, press the share button twice. Press the share button twice again to revert the left thumbstick to its original function.
Download PDF:Fantech EOS Pro Wireless Gamepad User Manual