OCULAR IOCAH15-7T IQ Home Solar EV Charger User Manual
- August 31, 2024
- OCULAR
Table of Contents
IOCAH15-7T IQ Home Solar EV Charger
“`html
Product Information
Specifications:
- Model: IOCAH15-7T / IOCAH15-22T
- Version: 2.0
- Contact: ocularcharging.com.au | sales@ocularcharging.com.au |
1300 912 650
Product Usage Instructions
Ways to Charge – IQ Home Solar:
The Ocular Home Solar charger can start a charging session in
two ways depending on the settings; using the Ocular app and Plug
& Charge.
Using Ocular App:
1. Download the Ocular App and add the charger to it.
2. Start and stop a charging session via the app or through your
car.
Plug and Charge:
If the charger is set to plug and charge, simply plug the
charger into your car to start a charging session. Push the button
on the front of the charger to stop charging. You can also stop
charging from your car or the app.
Scheduling:
You can set a schedule to start and stop a charging session. Set
the start and stop times along with the days for the schedule to
repeat. The car will start charging when the schedule begins.
Set Up the App and Charger:
1. Download the OCULAR APP as other apps will not be compatible
with your charger.
2. Register for an account, log in, and follow the steps to add
your charger using the serial number found on the charger.
Inviting People to Your Group:
After registering your account and charger, you can invite other
users to your group so they can use the charger from their app.
Start and Stop a Charging Session:
Option 1: Using the App
1. Under Energy tab, choose your desired charging mode: Solar
only, Solar assist, or Fast mode. You can change the mode at any
point during the charging session without needing to unplug or
restart.
FAQ
Frequently Asked Questions:
Q: How can I change the charging mode on the app?
To change the charging mode on the app, go to the Energy tab and
select your desired mode from the drop-down menu. You can switch
between Solar only, Solar assist, or Fast mode during the charging
session without interrupting the process.
“`
USER MANUAL
IOCAH15-7T / IOCAH15-22T
Version 2.0
ocularcharging.com.au sales@ocularcharging.com.au 1300 912 650
Welcome to your Ocular IQ Home Solar!
Download the Ocular App
Click here to download
Click here to download
Warning: This product shall only be installed, repaired or serviced by an
authorised electrician. All applicable local, regional and national
regulations for
electrical installations must be respected.
1
WAYS TO CHARGE – IQ HOME SOLAR
The Ocular Home Solar charger can start a charging session in two ways
depending on the settings; using the Ocular app and Plug & Charge.
OCULAR APP
After downloading the Ocular App and adding the charger to it (See section 3),
you can start and stop a charging session via the app, you can also stop a
charging session through your car.
PLUG AND CHARGE
If the charger is set to plug and charge (See section 3: Plug & Charge), you
can start a charging session by simply plugging the charger to your car. To
stop charging, push the button on the front of the charger. You can also stop
charger from your car (check owners manual for instructions) or from the app.
SCHEDULING
You can set a schedule to start and stop a charging session. Set the start and
stop times and the days for the schedule to repeat. Just plug the car in and
the car will start charging when the schedule starts.
2
SET UP THE APP AND CHARGER
Please ensure you have downloaded the OCULAR APP, other apps will not be
compatible with your charger. (see page 1)
Please scan QR Code or CLICK HERE to watch this video on how to connect your
charger and start charging!
1 Register for an account, then log in. After log in, you will see this page.
3
2 Press add station, then enter your charger’s serial number which can be
found on the silver sticker on the side of the charger. The serial number
begins with AW. eg. AW12345678912
3 Select the ‘energy tab’, then select ‘add gateway’. Enter M_ followed by the
serial number. eg. M_AW12345678912
4
4 Now your charger has been successfully added. You can now see your charger
under the ‘group’ tab and the energy tab will show a diagram of your home’s
electrical setup.
HOW TO INVITE PEOPLE TO YOUR GROUP After registering your account and charger,
you can invite other users to your group so that they can also use your
charger from their APP.
1 They will need to download the Ocular APP and register for an account
following instructions from Section 2, Step 1.
5
2 Once they are registered, go to your group and click on the invite symbol on
the top right corner of the screen, and then enter the email address they used
to register their account and click on Confirm.
3 An invitation will be sent to their Ocular App shortly after, to accept it,
first go to My/Profile tab, then click on the message symbol on the top right
corner of the screen.
6
START AND STOP A CHARGING SESSION
OPTION 1 : USING THE APP
1
Under Energy tab, choose your desired charging mode: Solar only, Solar assist
or Fast mode by pressing the drop down and selecting the desired mode. You can
change the mode on the energy tab at any point in the charging session, you do
not have to unplug or restart. (If you want more information on these
settings, please see FAQ section at the end of this manual.)
2
Go to the ‘Group’ tab and select your charger.
7
3 Plug your charger into the car, then start a charging session by pressing
the ‘start’ button. This will then change to a ‘stop’ button, press this to
stop the charging session or stop charging through the vehicle. To delay
start, press the delay start button and choose up to a 3 hour delay.
If your charger is not providing max charging speed, your current limit may be
set too low. There are two ways to change the charging speed:
8
1. Change charging speed during a charging session (Smart Charging Speed):
Once the charging session has begun, there will be a slider appearing on the
screen for you to adjust the speed up to 32 A. However, the maximum charging
speed depends on the Maximum Current Limit set on the charger. For example, if
the smart charging speed is set to 32 A but the maximum current limit is set
to 10 A, then the charger will only cPhaleragsee sucpantoQ1R0CAo.de or CLICK
HERE to watch
this video on how to connect your charger and start charging!
2. Change Maximum Current Limit: To change the max charging speed, select
your charger from the Group tab, then click on the three dots on the top right
of the screen to enter setting, there will be another slider to change the
maximum current limit.
If the charger is still charging slow after changing both the Smart Charging
Speed and Maximum Current Limit, check if the charger is set to Solar Only or
Solar Assist mode following instructions from Section 3. Otherwise, there
might be a charging speed limit set on the vehicle, or there may be not enough
capacity in the house.
9
OPTION 2 : PLUG & CHARGE 1
Go to the ‘Group’ tab and select your charger. Turn on the plug and charge
feature by pressing the button. When you plug the car in, you will start
charging on the saved mode settings and override any scheduled charging
sessions, you do not have to press ‘start’. To stop charging, push the button
on the front of the charger. You can also stop charger from your car (check
owners manual for instructions) or from the app. You will charge with the pre-
selected energy mode. You can change the mode on the energy tab at any point
in the charging session, you do not have to unplug or restart.
10
OPTION 3 : SCHEDULED CHARGING SESSIONS
1
Press the plus button on the top right of the Schedule tab, and set the start
time and end time.
Please scan QR Code or CLICK HERE to watch this video on how to connect your
charger and start charging!
2
Select repeat to choose which days to utilise this charging schedule. You will
charge with the pre-selected energy mode. You can change the mode on the
energy tab at any point in the charging session, you do not have to unplug or
restart. The session will stop at the set time, or you can stop it earlier
through the app or car. YOU MUST TURN OFF PLUG AND CHARGE FOR THIS FEATURE
11
ENERGY TAB
On the top is the grid, the middle is your home and the bottom you will see
your charger. In the grid section, you will see either one number or three
numbers, depending on whether you have a single or three-phase charger. A
positive number means your home is drawing power from the grid. If you see
that the number is negative, then that means you are producing excess solar,
which is being exported to the grid. The number next to your charger
represents the charging speed.
12
CHARGING MODES
FAST MODE
In this mode, the vehicle will be charged at maximum power. This power can
come from a renewable energy source or the grid. If you have set a current
limit on the schedule or by the electrician during installation that will
determine maximum power.
SOLAR ASSIST
This mode will charge your EV at a minimum of 6 Amps plus any excess solar
produced. If solar production is low, up to 6 amps will be drawn from the
grid.
This is the preferred solar mode, particularly on cloudy days or when you have
a smaller solar system. This will ensure a continuous charge plus any excess
solar that your home generates.
SOLAR ONLY
This mode charges your EV only when enough excess solar is produced. Note that
there is a minimum amount of amps that need to be produced before the solar
mode will start charging. This is because electric vehicles do not like being
charged slower than these levels. The minimum depends on the charger
configuration:
Single Phase – 7 Amps
Three Phase – 20 Amps total across all three (3) phases.
If the solar production drops below the Single or Three phase threshold the
charging will pause and then restart after 2-3 minutes of continuous excess
solar above the Single and Three phase threshold.
We recommend this mode when you have a clear excess of solar power produced.
Use Solar Assist when your production is low or intermittent.
13
GUIDE TO CHARGING RECORDS & COST ESTIMATES
RECORDS
Go to the ‘Record’ tab for a complete overview of your charging history. You
can choose the time frame of your records: 7 days, 30 days, 90 days up to 1
year, by pressing the days and selecting from the drop down menu. You can
export the data by selecting the share button and receive the data in your
chosen email.
COSTS
Go to the ‘Cost’ tab. Here you can enter your electricity rate and press
calculate and you will be able to see the cost of electricity over the chosen
period of time.
14
IQ HOME SOLAR
DOES THE CHARGER NEED TO BE CONNECTED TO THE INTERNET? The charger must be
connected to the internet to function normally. · Ethernet using a CAT 6 cable
to your internet modem · WI-FI to the charger
Installer will need to enter the WIFI name and password into the charger
backend. Please note a minimum of 4 bands is required to have a strong and
stable
connection. It is the homeowner’s responsibility to supply a reliable internet
connection where
the charger is to be installed. If either of these is unable to be implemented
then we recommended a TP link
WI-FI extender.
WHAT HAPPENS IF MY CHARGER GOES OFFLINE OR LOSSES INTERNET? If the unit goes
offline the charger will actively try to re-connect. The app will not work if
the WI-FI has dropped out. If this happens charger will not work unless “plug
and charge” was set on the app or until the WI-FI signal returns. If you
change WI-FI password you will need to refer to the installation guide to
reset it.
HOW FAR CAN THE CHARGER BE FROM MY ELECTRICITY SUPPLY? The unit must be
installed within 15 meters of your home’s electricity box which is exporting
electricity. The CT clamps are configured for accuracy and a distance greater
than 20m can affect the accuracy of the readings.
15
SHOULD I PURCHASE A SINGLE PHASE (7KW) OR THREE PHASE (22KW) CHARGER?
The 7kW option available is a single phase (1P) charger whereas the 22kW
option is a three phase (3P) charger. Which phase charger you chose depends on
the phase of your EV, house supply and solar inverter. If you’re not sure what
type of power supply you have in your home, please speak to your electrician.
EV
House Supply Solar Inverter Recommended Charger
1P
1P
1P
1P
3P
1P
1P
1P
1P
3P
1P
1P
3P
3P
1P
1P or 3P*
1P
3P
3P
3P
3P
3P
3P
3P
*For max charging speed priority choose 3P whereas for max solar consumption choose 1P.
IS THE OCULAR IQ HOME SOLAR COMPATIBLE WITH ALL EVS? Yes, The IQ Home Solar is compatible with every EV in Australia.
DOES THE OCULAR IQ HOME SOLAR WORK WITH ANY SOLAR SYSTEM?
Yes. If you have a solar system that is constantly exporting electricity to
the grid, then the Ocular IQ Home Solar will allow you to use that excess
solar efficiently to recharge your vehicle’s battery. CT Clamps installed on
the incoming mains supply are used to measure the excess solar being sent to
the grid in real time.
How the Ocular IQ Home Solar understands your homes electricity usage
Excess Solar energy that is being exported to the grid can be used by the
Ocular IQ Home Solar to charge your EV
The Ocular IQ Home Solar to works in one of 3 modes · Fast · Solar Assist ·
Solar Only
CT CLAMP
The CT Clamp measures the electricity being either exported
or consumed by the home
Rooftop Solar generates electricity which feeds into the home
16
DO I NEED SOLAR TO USE THE OCULAR IQ HOME SOLAR? No, the hardware unit can be
operated as a smart EV charger that can still schedule, record and monitor all
your charging sessions. Solar modes or CT clamps can be connected in the
future for an added cost. The CT clamps will also allow the charger to be load
managed, meaning that your home is protected from overloading during charging
sessions.
WHAT HAPPENS IF I HAVE A HOME BATTERY? For the most part, any excess solar
produced by the system will be absorbed by the battery. The Ocular IQ Home
Solar modes work by using CT clamps to understand what you are exporting out
to the grid. You may find that the home battery is absorbing most of your
excess solar generated first and so what’s going out to the grid is minimal.
Despite this, it’s fine to still install a charger, but you may find the Solar
Assist mode best to draw a small amount from the grid/battery when no excess
solar is being produced. If there is excess solar available, it can then
utilise the available excess solar that the battery is not taking. Every
battery system behaves differently, and the ocular team cannot guarantee the
interaction between the charger and the battery.
HOW MANY CT CLAMPS ARE PROVIDED? One CT for single-phase versions and three
for three-phase versions. You must only use the CT clamps provided or an
approved CT from the Ocular team. This is to ensure that the solar and load
control readings are accurate at all times. CTs are supplied in the charger
box.
DOES THE UNIT CONNECT DIRECTLY TO A HOME BATTERY? The unit does not connect
directly to the battery. It uses CTs to monitor the excess solar being
exported to the grid at the home’s switchboard. We do not connect directly to
any battery system.
WHAT MODE SHOULD I CHOOSE BASED ON MY SOLAR PRODUCTION? This depends on the
mode you have set the IQ Home Solar to.
Fast Mode In this mode, the vehicle will be charged at maximum power. This
power can come from solar panels, the grid or both. If you have set a current
limit on the schedule or by the electrician during installation that will
determine maximum power. There is NO minimum amount of excess solar energy
required for use.
17
Solar Assist This mode will charge your EV at a minimum of 6 Amps plus any excess solar produced. If solar production is low, power will be drawn from the grid. This is the preferred solar mode, particularly on cloudy days or when you have a smaller solar system. This will ensure a continuous charge plus any excess solar that your home generates. There is NO minimum amount of excess solar energy required for use.
Solar Only This mode charges your EV only when enough excess solar is produced. The minimum excess solar required for use is shown in this table:
EV
House Supply Solar Inverter
Recommended Charger
Minimum Excess solar Needed (For Solar Only)
1P
1P
1P
1P
3P
1P
1P
1P
1P
3P
1P
1P
3P
3P
1P
1P or 3P*
1P
3P
3P
3P
3P
3P
3P
3P
7 amps (~2kW) 7 amps (~2kW) 7 amps (~2kW) 21 amps (~5kW) 7 amps (~2kW) 21 amps (~5kW)
If the solar production drops below the indicated threshold the charging will
pause and then restart after 2-3 minutes of continuous excess solar above the
threshold. We recommend this mode when you have a clear excess of solar power
produced. Use Solar Assist when your production is low or intermittent such as
on a cloudy day.
Our experience shows that large variable loads like air conditioning can
absorb most of the solar generation. Use the Energy tab on the Ocular App to
understand the excess available and choose the Solar Assist mode if excess
generation is consistently below the Single and Three phase threshold.
HOW MUCH EXCESS SOLAR ENERGY IS MY HOME IS PRODUCING?
You can tell this from the Energy tab on the Ocular app. This will differ
slightly depending on whether your system is single or three phase. For
single-phase, only one (1) value will be shown on this screen. Reading this is
important for determining whether Solar Only can be used.
18
Single Phase The negative sign indicates that power is in excess and is being
exported from the solar panels to the grid. When this number is consistently
between 0 and -7 amps there is not sufficient excess solar to use solar only.
Three Phase There will be three numbers presented on the app. You can find the
net power exported/drawn from the grid by adding the numbers together.
Solar Only mode will only work when all three (3) phases are exporting greater
than 20 Amps in total. In this example, the Solar Only mode will work at 8
Amps as this is averaged across all three (3) phases. (5+5+14)/3 = 8 Amps per
phase
Solar Only mode will not work when all three (3) phases are exporting less
than 20 Amps. This means that there is no clear excess when summing all three
(3) phases. When summing up all 3 phases, the solar is only exporting 4 Amps,
which is less than the required 20 Amps before charging. Solar excess is
indicated by a negative (-) value. In this case, choose Solar Assist or Fast
Mode if you would like to charge your car.
19
WHAT IS NET METERING? Net metering is a function specific to 3 Phase
installations and only affects solar only and solar assist modes. The charger
monitors the solar excess on all three phases and will charge if the total
excess across all phases is greater than 21 amps, rather than needing 7 amps
individually across each phase. This means that if one phase has a high load,
for example the rest of the household load, the charger will still operate.
CAN I USE MY OWN INSTALLER? If you wish to use your own installer, they must
be a fully qualified electrician. Ocular cannot be held responsible for any
issues or failures of any products caused by the installation process or from
a result of an incorrect setup and configuration. We highly recommend you
engage one of our trained and authorised installers to ensure the unit is
connected correctly the first time. All installers must be trained and
certified by Ocular prior to installation or the warranty will be void.
WHAT IS LOAD MANAGEMENT? The Ocular IQ Home Solar CT Clamps can perform both
solar and load management. If set up by the electrician, it can indicate the
home’s electricity supply capacity. The Ocular IQ Home Solar will then balance
the charging speed based on the real-time load in the house to prevent the
home’s electricity from overloading.
WHERE DO I DOWNLOAD THE OCULAR APP? The Ocular App is required to use the
charger. Click on the Apple or Google App store to download the Ocular App or
search via your relevant app store.
CAN YOU SCHEDULE A CHARGING SESSION? Yes, you can schedule multiple sessions
per day and also adjust your charging speed. Take advantage of solar daytime
charging or schedule to charge off-peak. You must be plugged in before the
start time for the schedule to work. Otherwise, you need to press start on the
App.
20
DO I HAVE TO BE PLUGGED INTO THE CHARGER BEFORE A SCHEDULED APP CHARGING
SESSION? Yes, you must be plugged in before the start of the App scheduled
session to have the schedule function work. Eg. if you set a schedule from 6
pm to 7 pm you must be plugged in before 6 pm for the scheduling to start. If
you plug in after 6 pm then you need to press the start button on the App to
start a charging session. This will override the schedule for the individual
charging session for the day.
IS THE OCULAR IQ HOME SOLAR OCPP COMPATIBLE? Yes, the Ocular IQ Home Solar is
OCPP compatible. Please note, if an OCPP software platform is enabled on the
charger, the Ocular App and some of the local functions of the unit will not
be available.
WILL THE OCULAR IQ HOME SOLAR WORK WITH OFF-GRID SOLAR SYSTEMS? No. We require
a grid connection to ensure reliable charging. A very minimal amount of
electricity may be taken from the grid for a short period of time if solar
production drops suddenly.
WHAT IS THE REFRESH RATE FOR THE ENERGY TAB? The energy tab will be refreshed
every 30 seconds via the cloud servers which are hosted in Australia.
IQ HOME SOLAR
ocularcharging.com.au sales@ocularcharging.com.au 1300 912 650
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>