KRAIN KP7001-FPR30-KIT Drip Control Zone Kit with Pressure Regulator and Filter Instruction Manual
- June 3, 2024
- KRAIN
Table of Contents
Drip Control Zone Kit
with Pressure Regulator and Filter
Models
KP7001-FPR30-KIT
KP7001-FPR40-KIT
Features and Benefits
- Pre-assembled for quick installation
- Heavy duty, corrosion resistant for long life
- 5 year warranty
Specifications
- Pressure regulation 30 or 40 PSI (2,1 bar; 2,8 bar)
- Flow: 0.5 - 25 GPM (1,9 - 94,6 LPM)
- Operating pressure: 10 - 120 PSI (0,7 - 8,3 bar)
- Solenoid: 24V AC
- Inlet: 1″ (2,5 cm) female thread NPT
- Outlet: 1″ (2,5 cm) female thread NPT
- Height: 6-1/2″ (16,5 cm)
- Width: 3″ (7,6 cm)
- Length: 14-1/2″ (36,8 cm)
Installation
- Install the valve on the supply line
- Orient the pressure-regulating filter down
- Connect one solenoid wire to the controller common and the other wire to the controller power using water-tight connectors
- Unscrew the cap of the pressure-regulating filter and remove the filter element
- Replace the cap
- Use the controller to activate flow. Or to operate through the valve manually instead, turn the solenoid counter-clockwise 1/2 to 3/4 turns
- Run water several minutes to flush the system
- Install downstream elements
Maintenance
- Periodically remove the filter element, rinse and reinstall
K-RAIN MANUFACTURING CORP.
1640 Australian Avenue
Riviera Beach, FL 33404 USA
PH: 561.844.1002
1.800.735.7246
FAX: 561.842.9493
www.krain.com
© K-RAIN Manufacturing Corp.
99901388
Documents / Resources
|
KRAIN KP7001-FPR30-KIT Drip Control Zone Kit with Pressure Regulator and
Filter
[pdf] Instruction Manual
KP7001-FPR30-KIT, KP7001-FPR40-KIT, KP7001-FPR30-KIT Drip Control Zone Kit
with Pressure Regulator and Filter, KP7001-FPR30-KIT, Drip Control Zone Kit
with Pressure Regulator and Filter, Pressure Regulator, Regulator
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>