Comfee CKE17L1HBPH Stainless Steel Electric Kettle Instruction Manual
- August 31, 2024
- comfee
Table of Contents
- CKE17L1HBPH Stainless Steel Electric Kettle
- Specifications
- Product Information
- Important Safeguards
- Parts and Features
- Operation Instructions
- Q: Can I boil liquids other than water in the kettle?
- Q: Is it safe to open the lid while water is boiling?
- Q: What should I do if the water doesn’t reach the set
CKE17L1HBPH Stainless Steel Electric Kettle
“`html
Specifications
- Model: CKE17L1HBPH
- Rated Voltage: 120V~ 60Hz
- Rated Power: 1500W
- Capacity: 1.7L
Product Information
Important Safeguards
Always read the instruction manual carefully before using the
electric kettle to ensure safety and continued enjoyment of the
product.
Parts and Features
Top View:
- Spout
- Lid with opening button
- Handle Button
- Water gauge
- Power base
Operation Instructions
Before First Use
-
Read all instructions and important safeguards.
-
Remove all packing materials and ensure the product is in good
condition. -
Wipe the interior with a damp cloth, rinse thoroughly, and dry
all parts completely. -
Run a boiling cycle to prepare the kettle for use.
Heating Water
-
Place the power base on a sturdy, level, and dry surface.
-
Ensure the removable filter is properly inserted.
-
Fill with water between Min and Max levels.
-
Close the lid securely.
-
Plug in the power cord and place the kettle on the power
base. -
The digital panel will display the increasing temperature.
-
When the set temperature is reached, the kettle will beep.
-
Lift the kettle off the base to serve when ready.
-
Pour out any remaining water after use and unplug the
cord.
Using Keep Warm Temperatures
- Place power base on a sturdy surface and ensure filter
insertion.
FAQs
Q: Can I boil liquids other than water in the kettle?
A: No, it is recommended to only fill the kettle with water to
avoid damage.
Q: Is it safe to open the lid while water is boiling?
A: No, it is advised not to open the lid while water is boiling
to prevent spills and burns.
Q: What should I do if the water doesn’t reach the set
temperature?
A: Ensure the kettle is properly plugged in and follow
instructions to troubleshoot any issues.
“`
ELECTRIC KETTLE
Instruction Manual
CKE17L1HBPH
IMPORTANT NOTE: For your safety and continued enjoyment of this product,
always read the instruction Manual carefully before using.
CONTENT
IMPORTANT SAFEGUARDS
1
PARTS AND FEATURES
3
OPERATION INSTRUCTIONS
4
CLEANING AND MAINTENANCE
11
TROUBLESHOOTING
12
SERVICE AND SUPPORT
13
IMPORTANT SAFEGUARDS
· When using electrical appliances, basic safety precautions should always be
followed including the following:
· Read all instructions. · Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions or has been damaged in any manner.
Return appliance to the nearest authorized service facility for examination,
repair or adjustment. · To protect against fire, electrical shock and injury
to persons do not immerse cord, plugs or other live parts in water or other
liquid. · Do not touch hot surfaces. · Scalding may occur if the lid is
removed during the brewing cycles. · Do not use outdoor. Household use only. ·
Close supervision is necessary when any appliance is used keep away from
children. · Do not use appliance for other than intended use. · Unplug from
outlet when not in use and before cleaning. Allow to cool before putting on or
taking off parts, and before cleaning the appliance. · The use of accessory
attachments not recommended by the appliance manufacturer may cause injuries.
· Do not let cord hang over edge of table or counter, or touch hot surfaces. ·
Do not place on or near a hot gas or electric burner, or in a heated oven. ·
Always attach plug to appliance first, then plug cord into the wall outlet. To
disconnect, turn any control to “off”, then remove plug from wall outlet.
1
IMPORTANT SAFEGUARDS
· A short power-supply cord is provided to reduce the risk resulting from
becoming entangled in or tripping over a longer cord.
· This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
· A short power-supply cord is providedto reduce the risk resulting from
becoming entangled in or tripping over alonger cord.
· Longer detachable power-supply cords or extension cords are available and
maybe used if care is exercised in their use.
· If a longer detachable power-supply cord or extension cord is used: – The
marked electrical rating of the cord set or extension cord should beat least
as great as the electrical rating of the appliance; – The longer cord should
be arranged so that it will not drape over thecounter top or table top where
it can pulled on by children or tripped over.
· Do not use appliance for other than intended use.
SAVE THESE INSTRUCTIONS
2
PARTS AND FEATURES
TOP VIEW
Spout
Lid
Lid opening button Handle Button
Water gauge
Power base
TECHNICAL DATA OF THE PRODUCT
Model CKE17L1HBPH
Rated voltage 120V~ 60Hz
Rated power 1500W
Capacity 1.7L
NOTE ll the pictures in this manual are for explanation purpose only. Any
discrepancy between the real object and the illustration in the drawing shall
be subject to the real subject. The product is subject to the actual product
and configuration.
3
OPERATION INSTRUCTIONS
CONTROLS/FUNCTIONS
Power ( ) Press button to begin boiling, or after selecting a custom
temperature to begin heating. Temperature ( ) Allows you to set the desired
temperature for heating or Keep Warm from105°F-205°F Keep Warm ( ) Allows you
to enable or to disable the Keep Warm mode.
BEFORE FIRST USE
1. Read all instructions and important safeguards. 2. Remove all packing
materials and make sure that the product has been received in
good condition. 3. Wipe out the interior of the kettle with a damp cloth. If
your hand will not fit inside the
kettle, swish warm, soapy water around in the interior of the kettle with the
lid closed. 4. Rinse out the inside of the kettle thoroughly with water. 5.
With a damp cloth, gently wipe off the exterior of the kettle. Do not wipe off
electrical
components as this may cause damage to the unit. 6. Dry all parts completely.
7. It is recommended to run your kettle through one boiling cycle before first
use.
Following the instructions in “Heating Water” on page 7, boil one kettle of
water. When water has boiled, pour it out and rinse the inside of the kettle
once more. The kettle is now ready for use.
HEATING WATER
1. Place power base on a sturdy, level, and dry surface. 2. Make sure that
the removable filter is properly inserted. See “Removing/Inserting the
Filter” on page 9 for instructions on inserting the filter. 3. Open the lid
and fill with water. Water must be filled between the Min and Max levels
inside the kettle. 4. Close the lid securely. The lid will make a light
“click” sound when it locks into place. 5. Plug the power cord into a wall
outlet and place the kettle onto the power base. The
kettle will beep once and the indicator lights will flash. 6. Press ( ) to
start boiling (212°F), or ( ) to select a custom temperature followed
by ( ) to begin heating. When using ( ) to select a custom temperature, the
temperature will increase by 10 degrees up to 205°F with each button press.
4
OPERATION INSTRUCTIONS
7. The digital control panel will display the water’s increasing temperature
as it heats. 8. Once the water reaches the set temperature, the kettle will
beep three times signifying
the end of the cycle. 9. If Keep Warm ( ) mode was not selected at the
beginning of the cycle, the kettle will
enter standby mode. 10. Using the handle, lift the kettle off the power base
to serve. Do not touch the stainless
steel kettle Body as it will be hot. 11. When finished serving, pour out any
remaining water and unplug the power cord.
CAUTION
Never fill kettle with any liquid other than water. Never open the lid while
water is boiling. To avoid boiling water spilling out; never exceed the MAX
line when filling.
NOTE
· Use distilled water when possible for best taste and to minimize mineral
build-up in the kettle.
· Lifting the kettle in the middle of heating cancels the process. · If the
kettle is heated with no water, the internal safety mechanism will
automatically
turn the kettle off. · During the heating process, the temperature setting can
still be adjusted as long as the
temperature setting has not been reached.
USING KEEP WARM TEMPERATURES
1. Place power base on a sturdy, level, and dry surface. 2. Make sure that
the removable filter is properly inserted. See “Removing/Inserting The
Filter” on page 9 for instructions on inserting the filter. 3. Open the lid
and fill with water. Water must be filled between the Min and Max levels
inside the kettle. 4. Close the lid securely. The lid will make a light
“click” sound when it locks into place. 5. Plug the power cord into a wall
outlet and place the kettle onto the power base. The
kettle will beep once and the indicator lights will flash. 6. Using the ( )
button, set the desired temperature. Press ( ) button to initiate the
Keep Warm mode at the end of the heating cycle, then press the ( ) button to
start heating. 7. Once the set temperature is reached, the kettle will beep 3
times and automatically switch to Keep Warm mode, and hold the water at that
temperature for 60 minutes. 8. After 60 minutes of Keep Warm, the kettle will
beep twice, and the indicator lights will shut off. The kettle will
automatically shut down and enter standby mode.
5
OPERATION INSTRUCTIONS
CAUTION
To avoid boiling dry, never leave kettle unattended while using Keep Warm
function.
NOTE
· After setting the custom temperature or Keep Warm temperature, and press the
( ) button to start heating, if the kettle is lifted during the heating
process, ony custom temperature settings (including Keep Warm) will be lost.
· Once the kettle is in Keep Warm mode, the kettle may be lifted off the power
base to serve. If the kettle is not replaced in 2-3 minutes, the Keep Warm
function will be canceled. Pressing ( ) during the Keep Warm mode will
immediately cancel the function.
· During Keep Warm mode, the temperature can still be adjusted by pressing the
( ) button.
SUGGESTED BREWING TEMPERATURES
Drink/Food
French Press Coffee Oolong Tea Green Tea
Black Tea or Herbal Tea White Tea
Noodles or Oatmeal Hot Chocolate
Suggested Temperature
195°F 175°F 160°F-175°F 212°F 160°F 212°F 212°F
6
OPERATION INSTRUCTIONS
REMOVING/INSERTING THE FILTER
TO REMOVE THE FILTER: 1. Do not attempt to remove filter until the unit has
cooled completely. Open the lid and
press in each of the two tabs on the front of the spout to release the filter.
From inside the kettle, grasp the angled tab on the filter and pull upward.
The filter should slide out easily. 2. Wash and rinse the filter, then
replace.
TO INSERT THE FILTER: 1. Open the lid. 2. Grasping the filter at the angled
tab, insert the bottom tab first followed by the top two
tabs on the filter. Slide the filter into the slots on the inside of the spout
until the filter sits securely into place. 3. Once the filter is securely in
place, the kettle will be ready for use.
7
OPERATION INSTRUCTIONS
CAUTION
Never fill kettle with any liquid other than water. Never open the lid while
water is boiling. If the lid is not completely closed the kettle will not
automatically turn off. To avoid boiling water spilling out, never exceed the
MAX line when filling.
NOTE
· It is necessary for the filter to be properly in place for the kettle to
shut off automatically.
· Use distilled water when possible for best taste and to minimize mineral
build-up in the kettle.
MINERAL DEPOSITS
Hard water can leave mineral deposits that create scale build-up on the
interior of the kettle. If mineral deposits occur, follow these steps: 1. Fill
the kettle halfway with water. 2. Following instructions in “Heating Water” on
page 7, bring the water to a boil. 3. Add one cup of white vinegarto the water
in the kettle. 4. Allow the mixture to soak overnight. 5. Empty the mixture
and rinse out the kettle. 6. Refill the kettle with water only. Bring it to a
boil and empty again. Repeat as needed.
RECIPES
Honey Mint Tea
4 tbsp. honey
1-2 fresh mint leaves
1
lemon wedge (about 1/4 lemon)
4 cups hot water
Boil 4 cups of water with your water kettle. Add 1 tablespoon of honey to 4 heat-safe mugs. In a separate bowl or cup, muddle together mint and lemon juice and evenly distribute between the mugs. Pour hot water over ingredient mix.
8
OPERATION INSTRUCTIONS
Hot Peanut Butter Cup
4 packets* hot cocoa mix
8 tsp.
peanut butter
3 cups
hot water
- 1 cocoa mix packet is approximately 1.5 tablespoons.
Boil 3 cups of water with your water kettle. Allow to cool slightly. Add cocoa mix packet* of your choice and 3/4 cup of hot water to 4 heat-safe mugs. Mix in 2 teaspoons of peanut butter to each mug. Allow to cool and enjoy!
Chai Tea Latte 8 bags chai spice black tea 1 cup hot water 2 cups whole milk 1
tsp. cinnamon 1 tsp. nutmeg
Boil at least 1 cup of water with your water kettle; boil more water if you
like it more diluted. Place 2 tea bags each in 4 heat-safe mugs. Steep with
1/4 cup of water in each mug for 3-5 minutes. Remove tea bags and discard.
Pour the milk into a separate bowl and whisk until frothy. Pour over each mug
of tea; top with a sprinkle of cinnamon and nutmeg.
Spiced Cider Tea
2 tbsp. cinnamon
4
whole cloves
4 bags black tea
4 cups apple cider
4 tsp. sugar
4 cups hot water
In 4 heat-safe mugs, add 1 cup of apple cider, 1/2 tbsp cinnamon, 1 clove, 1 tea bag, and 1 tsp sugar. Boil water in your kettle. Pour over the mixture in the mugs, about 1 cup per each mug. Let steep for 5 minutes, then remove tea bags and cloves. Stir to combine and enjoy!
9
OPERATION INSTRUCTIONS
Mocha Coffee
4 packets* hot cocoa mix
8 tsp.
instant coffee
4 cups
hot water
4 tsp.
sugar
4 tbsp
milk
- 1 cocoa mix packet is approximately 1.5 tablespoons.
Boil 4 cups of water with your water kettle and allow to cool slightly. In 4 heat-safe mugs, add the packets* of cocoa mix, 2 tsp coffee, 1 tsp sugar and 1 tsp milk. Add 1 cup hot water to each mug. Stir to combine and enjoy!
Egg Drop Ramen
2 packs instant ramen noodles
6 cups hot water
2
eggs
2 tsp.
chopped scallions
1 tsp.
sesame oil
1 tbsp. soy sauce
Boil 6 cups of water in your kettle. Place the dried noodles in 2 heat-safe bowls. If desired, pour the flavor packets over the noodles. Carefully pour 2 cups of hot water over each of the bowls of noodles. Let sit for about 3 minutes then stir. Re-boil the remaining 2 cups of water. Pour over the noodles and add an egg to each. Stir thoroughly until the egg is distributed. Add in the sesame oil, soy sauce, and scallions.
10
CLEANING AND MAINTENANCE
Always unplug the kettle and allow it to cool completely before cleaning. ·
Wipe the exterior of the kettle with a damp cloth, taking care to avoid the
electrical
components. · Clean the interior of the kettle with a soft sponge and warm,
soapy water. If your hand
does not fit in the lid opening, swish warm, soapy water around inside of the
kettle with the lid closed. · Rinse any remaining soapy water from the kettle.
· Drain.
CAUTION
Always unplug the kettle and allow it to cool completely before cleaning.
Never immerse the kettle, power cord, plug or power base in water.
NOTE
· Never attempt to disassemble the kettle or the power base. · Always take
care not to allow electrical components to come into contact with water. · Do
not use abrasive cleaners or scouring pads of any kind on the kettle or power
base.
This will cause damage to the finish and may create a risk of electrical
shock. · Please follow instructions and caution statements for cleaning and
user-maintenance,
any other servicing should be performed by an authorized service
representative.
11
TROUBLESHOOTING
Operation of your appliance can lead to errors and malfunctions. The following tables contain possible causes and notes for resolving an error message or malfunction. It is recommended to read the tables carefully below in order to save your time and money that may cost for calling to the service center.
Problem
There are mineral deposits on the interior of the kettle.
Solution
· A certain amount of scale build-up is normal after long periods of use and
is caused by minerals contained in hard water. The best way to prevent mineral
deposits is to always use distilled water in the kettle.
· To remove deposits, try filling the kettle halfway with water and adding a
few slices of lemon, then boil. If this does not work, please see MINERAL
DEPOSITS above.
The kettle function does not work after setting the temperature.
· Make sure the kettle is seated properly on the power base and that the base
is connected to a functioning electrical outlet.
· If the kettle is heated with no water, the internal safety mechanism will
automatically turn the kettle off. The kettle will begin working again when
water is added.
· If the set temperature is lower than the actual temperature in the kettle,
the kettle will beep 3 times and turn off.
12
SERVICE AND SUPPORT
1 YEAR LIMITED WARRANTY This is the only express warranty for this product and
is in lieu of any other warranty or condition. This product is warranted to be
free from defects in material and workmanship for a period of one (1) year
from the date of original purchase. During this period, your exclusive remedy
is repair or replacement of this product or any component found to be
defective, at our option; however, you are responsible for all costs
associated with returning the product to us and our returning the product or
component under this war-ranty to you. If the product or component is no
longer available, we will replace with a similar one of equal or greater
value. This warranty does not cover wear from normal use, and operation
doesn’t conformity with the instruction manuals, or damages to the product
resulting from accident, alteration, abuse, or misuse. This warranty extends
only to the original consumer purchaser or gift recipient. Keep the original
sales receipt, as proof of purchase is required to make a warranty claim. This
warranty is void if products is used for other than single-family household
use or subjected to any voltage and waveform other than as specified on the
label. We exclude all claims for special, incidental, and consequential
damages by breach of express or implied warranty. All liability is limited to
amount of the purchase price. Every implied warranty, including any
statutory.warranty or condition of merchant-ability or fitness for particular
purpose, is disclaimed except to the extent prohibited by law, in which case
such warranty or condition is limited to the duration of this written
warranty. This warranty gives you specific legal rights. You may have other
legal rights that vary depending on where you live. Some states or provinces
do not allow limitations on implied warranties or special, incidental
consequential damages, so the foregoing limitations may not apply to you.
Please note that failure to complete and submit this form does not diminish
your warranty.
13
In the Event of a warranty period claim, question, comments or if service is
required for this product, please contact us at the following: Parsippany, NJ
07054 Toll Free: 1-866-646-4332 Amazon
Store: https://www.amazon.com/comfee Tel:
866-646-4332 Made in China
14
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>