comfee CDC22P1AWW Compact Countertop Dishwasher Installation Guide
- June 3, 2024
- comfee
Table of Contents
comfee CDC22P1AWW Compact Countertop Dishwasher
Parts provided
You’ll soon be enjoying your new appliance
Quick connect hose components as follows:
-
Inlet Hose
-
Faucet Adapter
-
Quick Connect
Common connect hose as follow:
- Inlet Hose
Inlet Water Connection
Bringing it all together
METHOD 1 : Direct Connect with Faucet
❶ Take the existing aerator off your faucet.
❷ Screw the faucet adapter onto (or into) the faucet tap. Check for leaks (Use
Teflon tape to eliminate if necessary).
IMPORTANT:
Please confirm whether the supplied adapter is suitable for your faucet
tap.
If not, please contact your local plumbing supply center where adapter is
available for purchase .
❸ Connect the star-shaped connection of the inlet hose onto the inlet port
on the back of dishwasher.
❹ Connect the circular connection of the inlet hose onto the shorter male of
the quick connect.
❺ Attach the quick connect onto the faucet adapter by pulling down the locking
collar on the quick connect.
❻ Slowly open the hot water line and check for any sign of water leaks at all
hose connections.
IMPORTANT:
Once you open the water supply line, the inlet hose will be pressurized.
If you want to remove the quick connect from faucet adapter, please close
the faucet first and then press the red pressure relief button to relieve
water pressure before taking off the quick connect.
METHOD 2 : Connect Under Counter
❶ Connect the water supply hose to a threaded 3/4(inch) connector and make
sure that it is fastened tightly in place.
MPORTANT:
If your inlet hose is not a 3/4 inches male threaded, you’ll need an
adapter to ensure a proper fit
❷ Connect the water drain hose. The drain hose must be correctly fitted to
avoid water leaks. Ensure that the water drain hose is not kinked or crushed.
IMPORTANT:
If the water pipes are new or have not been used for an extended period of
time, let the water run to make sure that the water is clear and free of
impurities. If this precaution is not taken, there is a risk that the water
inlet can get blocked and damage the appliance. Please securely fix the drain
hose in either position A or position B.
Using Your Dishwasher
Let’s get started
Before first use : Fill the dispenser of rinse aid and detergent
IMPORTANT:
To get the best performance from your dishwasher, read all operating
instructions before using it for the first time. Clean up any rinse aid
spilled during with an absorbent cloth to avoid excessive foaming during the
next wash. Don’t forget to replace the dispenser’s cap before you close
dishwasher door.
Troubleshooting
We are always here to help
If you require any technical guidance or find that your washing machine is not operating as intended, a simple solution can often be found in the troubleshooting section of the Owner’s Manual.
Commonly seen error codes
Error Code | Description | Possible Cause |
---|---|---|
E1 | Longer inlet time | Faucets is not opened, or water intake is restricted, |
or water pressure is too low.
E3| Not reaching required temperature.| Malfunction of heating element.
E4| Overflow| Some element of dishwasher leaks.
Ed| Failure of communication between main PCB with TFT PCB.| Open circuit or
break of wiring for the communication.
For further assistance, feel free to contact us at 1-866-646-4332 with the following information ready:
Thank you so much for choosing Comfee’ appliances.
We really appreciate your choice and would love to elp you get started.
Customer Assistance
1-866-646-4332
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>