HDTVSUPPLY Hd Matrix Switching System User Manual

Hd Matrix Switching System

Product Specifications

• Product Name: HDTV Supply HD MATRIX SWITCHING SYSTEM
• Model: Professional Matrix Switching System
• Communication Control Protocols: TCP/IP, RS232
• Warranty: Fragile label serves as the warranty certificate

Product Introduction

The HDTV Supply HD MATRIX SWITCHING SYSTEM is a professional
matrix switching system designed for high-definition audio and
video signal distribution. It provides seamless switching between
multiple input sources to multiple output displays.

System Parameters

The system parameters include support for TCP/IP and RS232
communication control protocols, ensuring versatile connectivity
options for seamless integration with various control systems.

Operating Instructions

1. Ensure that the power supply is connected correctly to the
   system.

2. Connect the input sources (such as Blu-ray players, gaming
   consoles) to the designated input ports of the matrix switch.

3. Connect the output displays (such as TVs, projectors) to the
   output ports of the matrix switch.

4. Power on the matrix switch and the connected displays.

5. Use the provided control software or communication control
   protocols (TCP/IP, RS232) to select the desired input source for
   each output display.

6. Enjoy seamless switching of audio and video signals between
   different input sources on your output displays.

Frequently Asked Questions (FAQ)

Q: What should I do if I encounter communication issues with

the matrix switching system?

A: If you encounter communication issues, first ensure that the
connections are secure and that the control software settings are
correct. You can also refer to the Communication Control Protocol
section in the user manual for troubleshooting steps.

Q: Can I cascade multiple matrix switches for expanded

connectivity?

A: Yes, you can cascade multiple matrix switches to expand the
number of input sources and output displays in your setup. Ensure
proper configuration and compatibility between the cascaded
switches for optimal performance.

HDTV Supply HD MATRIX SWITCHING SYSTEM
Professional Matrix Switching System User Manual
Before using this product, please read the instructions first.

Contents

HDTV Supply HD MATRIX SWITCHING SYSTEM

Contents
Chapter 1: Preface …………………………………………………………………………………………………………….2
Chapter 2: Notices……………………………………………………………………………………………………………..3
Chapter 3: Product Introduction ………………………………………………………………………………………… 4
Chapter 4: System Parameters ………………………………………………………………………………………….. 5
Chapter 5: Packaging, Panel, and Keys ……………………………………………………………………………….. 6 5.1. Matrix Packing List…………………………………………………………………………………..6 5.2. Structural Representation………………………………………………………………………..6 5.3. Panel Description………………………………………………………………………………………7 5.4. Remote Control Button ………………………………………………………………………………. 8
Chapter 6: Installation Instruction …………………………………………………………………………………. …9 6.1. Signal Connection………………………………………………………………………………………9 6.2. RS232 Communication Interface Connection ……………………………………………..9 6.3. RJ45 for TCP/IP Control……………………………………………………………………………9 6.4. RJ45 for RS232 Control……………………………………………………………………………10 6.5. Power Connection………………………………………………………………………………………10
Chapter: 7. Communication Control Protocol…………………………………………………………………..11 7.1. TCP/IP Control………………………………………………………………………………………….. 11 7.2. RS232 Control……………………………………………………………………………………………. 11 7.3. Communication Control Protocol……………………………………………………………… 11
Chapter 8: Operating Instructions ………………………………………………………………………………… 13
Chapter 9: Control Software ………………………………………………………………………………………… 15
Chapter 10: Common Faults And Maintenance………………………………………………………………..16
Chapter 11: Warranty Description ………………………………………………………………………………….. 1

HDTV Supply HD MATRIX SWITCHING SYSTEM
Chapter 1: Preface
Welcome to choose our products. Thank you for your support of our products! For the safety of yourself and the equipment, please read the instruction manual carefully before using this equipment.
Products are covered with a fragile label; please preserve it carefully, which will serve as the warranty certificate.
Please read this guide first when you have any problems. The text has a detailed description of the device’s operation. If you still have questions, please contact us, and we will give you a satisfactory answer as soon as possible.
If this manual has version changes, we will not inform you, especially. Thank you for your understanding and cooperation!

HDTV Supply HD MATRIX SWITCHING SYSTEM
Chapter 2: Notices
To ensure the reliable use of the equipment and personnel safety, please observe the following items when installing, using, and maintaining it:
2.1 Do not use this product in the following places: dust, fumes, conductive dust, corrosive gas, and combustible gas places; exposure to high temperatures, dew, or rain; vibration or shock situations; electric shock, fire, and misoperation will result in product damage and deterioration.
2.2 At the end of the installation work, there is a need to ensure that there is no foreign body on the ventilation surface, including dust and other packaging items; otherwise, it may result in poor heat dissipation during operation, causing fire and error.
2.3 To avoid wiring and plugging an electric cable plug, which would easily lead to electric shock or cause damage to the circuit,
2.4 Installation and wiring must be solid and reliable; poor contact may lead to misoperation.
2.5 For applications where interference is serious, input or output high- frequency signal cable should be shielded to improve the anti-jamming performance of the system; the external power supply must be completely cut off to carry out the installation and wiring operation; otherwise, it may cause electric shock or damage to equipment.
2.6 This product is grounded through the grounding wire of the power supply line. To avoid the electric shock, the grounding wire must be connected to the earth.
2.7 Please do not touch the terminal when the power is on, which may cause electric shock and misoperation.
2.8 Please tighten and clean the terminals when the power is off. These operations may cause an electric shock when energized.
2.9 After the power supply is closed, the connection or removal of the communication signal cable, the cable connection of the expansion module or the control unit, or the removal of the device can result in equipment damage and misoperation.
2.10 Do not disassemble the equipment to avoid damage to the internal electrical components.
2.11 Be sure to read this manual to confirm the safety fully, then the program changes, commissioning, start and stop operation. If you cannot solve the problem,

please contact us.

HDTV Supply HD MATRIX SWITCHING SYSTEM

Chapter 3: Product Introduction
3.1 A matrix switcher is a professional switching device embedded with
intelligent control of high performance for the audio and video input signal synchronous switch to any output channels of audio and video.
3.2 A unique processing method is adopted, which greatly improves the switching
speed of the device. Support a variety of control methods; a flexible operation switch is widely used in radio and television engineering, multimedia conference halls, large screen display works, TV teaching, command, and control centers.
3.3 Interface bandwidth 3.4Gbps (total bandwidth 10.2Gbps), support the highest resolution of 38402160 at 30 Hz.
3.4 Support HDCP1.4 revision, which provides outstanding security and digital
content protection capabilities.
3.5 Support fast switching operation; support infrared remote control.
The input and output board support card function can be hot-swappable.
3.6 Supports basic matrix control instructions and basic matrix functions.
*With the power down memory function, with power off-site protection function.
3.7 Flexible control mode, with the crystal button panel operation, but also
provides 2 standard RS-232 communication interfaces and RJ45 port, compatible with a variety of environments, user-friendly and a variety of remote-control equipment with the use of:
One RJ45 interfacer uses RS232, which is a serial port.
One RJ45 interfacer uses TCP/IP, it is a LAN port.
3.8 Built-in International standard power.
3.9 Full metal chassis compatible with standard 19-inch cabinet.
3.10 Support user-defined matrix front panel LCD screen standby and control
software LOGO.
3.11 Support HDCP can decode Blue-ray DVD and so the corresponding equipment.

HDTV Supply HD MATRIX SWITCHING SYSTEM
Chapter 4: System Parameters

Input numbers Output numbers Signal interface
HDMI protocol
Bandwidth HDMI resolution Max. DVI resolution Max. VGA resolution Max. SDI resolution Max. DP resolution Max. AV system HDBaseT resolution Max. Clock jitter Bit rise time Bit drop time Maximum transmission delay Switching speed Signal intensity Impedance Input EDID The maximum input distance The maximum output distance Serial port version (Standard) LAN port version(option) Baud rate and protocol RJ45 serial port Power input Temperature humidity Size Mean time between failures

Matrix Specification
4/8/12/16/20/24/28/32 4/8/12/16/20/24/28/32 HDMIDVIVGASDIDPAVHDBaseT Support HDCP1.4 and HDMI1.4,compatible with the DVI1.0 3.4Gbpstotal 10.2Gbpseach color 3.4Gbps 38402160@30Hz 38402160@30Hz 38402160@30Hz 38402160@30Hz 38402160@30Hz PAL, NTSC adaptive 3840×2160@30Hz <0.15Tbit <0.3Tbit20% – 80% <0.3Tbit20% – 80% 5ns±1ns 200nsMax. T.M.D.S +/-0.4Vpp 50 EDID can read and write only for some models 38402160@30Hz less than 20 meters (good cable) 3840*2160@30hz less than 20 meters (good cable)
RS232Panel Key Remote
TCP/IPRS232Panel key Remote Baudrate9600, data bits8bits, stop1, no parity 1 = TX,2 = RX,5 = GND AC100 – 240V50/60hz Storage and use temperature: -20° ~ +70° C Storage and use humidity:10% ~ 90% 1U/2U/3U/7U with standard 19-inch box 30000hours

HDTV Supply HD MATRIX SWITCHING SYSTEM
Chapter 5: Packaging and Panel and Keys

5.1. Matrix packing list
Name Matrix switcher AC power cable cord RS232 Serial communication cable User manual Data CD Certificate Warranty card
5.2. Structural representation

Unit pcs pcs pcs pcs pcs pcs pcs

Numbers 1 1 1 1 1 1 1

Size
Lenth Model
0404/0808/0909 (Integral type) 0816/1616/1632 (Integral type) 0808(Plug type) 1616(Plug type) 3232(Plug type) 4040(Plug type)

Amm Bmm Cmm Dmm

480

44

240

440

480

88

310

440

480

88

310

440

480

132

320

440

480

308

400

440

480

308

400

440

HDTV Supply HD MATRIX SWITCHING SYSTEM
5.3. Panel Description (16 X 16 Plug type as an example)
Note: 1. The machine does not have ALL keys, replaced by OK, all OK = Enter in the system. 2. The machine has no FUN key, instead of MENU, press the menu key menu of MENU, and then
press the menu of the function key.

5.4. Remote control button

HDTV Supply HD MATRIX SWITCHING SYSTEM

HDTV Supply HD MATRIX SWITCHING SYSTEM

Chapter 6: Installation Instructions

6.1. Signal Connection The matrix interface is divided into signal input and output
interface, please use the corresponding cable to connect the input and output devices, the signal source (such as DVD, computer, etc.) output terminal matrix input device (INPUT), the matrix output (OUTPUT) connected to the Input interface of signal equipment (such as projector, TV, etc.).

6.2. RS232 Communication Interface Connection Matrix switch provides a standard RS-232 serial communication port
and RJ45 communication port, users can use a variety of remote-control equipment remote control. The RS-232 port of the matrix is a D shaped 9 pin male connector (the same as the serial port of the computer) Pin descriptions are as follows:

Serial number Pin

1

NC

2

RDX

3

TXD

4

NC

5

GND

6

NC

7

NC

8

NC

9

NC

illustration
None Transmit Exchange DataRXD Receive Exchange DataTXD
None Ground None None None None

Attention: The matrix RS-232 port and the computer or the central control should pay attention to the TXD and RXD line sequence, specifically to consider the other device pin definition.

6.3. RJ45 for TCP/IP Control The network matrix is supported by the TCP/IP protocol. When the
matrix is connected to a switch or router or PC directly, the matrix can communicate. The premise is to keep the IP address of the matrix and the LAN to be the same segment, otherwise, the IP address of the set matrix should be entered first.

6.4. RJ45 for RS232 Control
RJ45 to RS232

HDTV Supply HD MATRIX SWITCHING SYSTEM

The diagram below is a schematic diagram of the connection with the computer
6.5. Power connection Please connect one end of the power cord to the back of the
matrix with a power supply interface of AC100-240V 50/60HZ, which connects to the 100-240V 50/60HZ AC power supply. Note that to ensure the safety and normal operation of the equipment, a singlephase three-wire AC power supply.

HDTV Supply HD MATRIX SWITCHING SYSTEM
Communication control protocol
Chapter 7: Communication Protocol
7.1. TCP/IP LAN Control Parameter
Default IP address 192.168.1.168
1.1. Query IP instruction: HWC HNW192.168.1.168,6800,255.255.255.0,192.168.1.1,54.8 2.52.115.119.23
1.2. Reset Operation instruction: HWR 1.3. Setting up the IP instruction: HWS For example, HWS192.168.1.168.255.255.255.0.192.168.1.1
After the IP is set up, the communication of the host computer needs to be reconfigured and reconnected to normal communication control.
1.4: Port Number Support: Four 6800 / 6900 / 7000 / 7100
7.2. RS232 Serial Control Parameter
The baud rate is set to 9600, 8-bit data bits, 1-bit stop bits, no parity bits, and communication mode: asynchronous half-duplex serial communication.
7.3. Communication Control Protocol
The following protocols support all types of matrices: All protocol symbols must be entered in English, and English letters must be capitalized.

HDTV Supply HD MATRIX SWITCHING SYSTEM

Communication control protocol

Outp

Input switch Output Delimit ut

ID

ID1 er

ID2

End
chara cter

IN V

OUT1 ,

OUT2 .

For example: 1V1,2,3.
Put the input channel 1 is switched to the output 1,2,3 channel sequentially.
12V1,2,12,14. Put the input channel 12 is switched to the 1,2,12,14 channel of the output channel once.

HDTV Supply HD MATRIX SWITCHING SYSTEM
Communication control protocol

Switch an input channel to all output channels.

IDH

IDL

T

Input ID

O

A

L

L

Protocol identification

01TOALL 12TOALL channels.

Switching input channel 1 to all output channels. Switching input channel 12 to all output

Switch one to one

T

O

O

N

E

Protocol identification

TOONE Recall the mode.

Switch the matrix input X to output X

CALL Protocol identification

ID MODE ID

For example, CALL2

Recall the mode 2 of Matrix.

Save the mode.

S

A

V

E

Protocol identification

ID
Model ID

For example, SAVE2

Save the mode 2 of Matrix.

BUZON BUZOFF

Matrix Buzzer on Matrix Buzzer

Operating Instructions

HDTV Supply HD MATRIX SWITCHING SYSTEM

Chapter 8: Operating Instructions
Standby Image (LCD Screen) For any state press “ESC” to return to the screen (different models, slightly different).

“AV button” audio and video switch Press the AV button to enter the audio and video synchronization switch menu, as shown below; in this state, with the number keys select the input channel number and output channel number, and then press the OK key to switch. Select the “ALL” key instead of all output channels. For example, to switch the 1 input channel to all output channels, press “AV” – “01” – “ALL” “OK”.

“FUN” function key in standby mode, press the “fun” button to enter the system operation menu, the menu can be stored in the scene and call function, and restore the factory settings.

Operating Instructions

HDTV Supply HD MATRIX SWITCHING SYSTEM

For example, you can save a scene, and then call through the scene mode, selecting the save before the scene number, you can call directly, convenient, and quickly:

“MENU” key in standby mode, press “MENU” to enter the system settings menu, the menu can be set for the buzzer switch, the identification code settings, and language switch settings:
For example, under this menu, press “1” to select the buzzer settings menu, and then press the “OK” button to enter the menu. In the submenu, press the “1” key to switch the state of the buzzer switch, and press “OK” to determine the settings that can be saved.

HDTV Supply HD MATRIX SWITCHING SYSTEM
Chapter 9: Control Software
· In the flash disk attached to the packing box, the control software and the documentation of the product are stored; the user can read the manual in the flash drive.
· Copy the files in the flash disk to the PC computer of the Windows system and double-click HDMatrixcontroller.exe to enter the matrix control software.
1. After confirming the serial port or network connection to the matrix, at the serial port selection point, select the serial port number needed, and click on the connection, then the connection will be successful and the communication can begin; the network version chooses the corresponding IP address to click on the connection, and the network version settings refer to the computer IP address settings. 2. Click the drop-down menu in the upper right corner of the software to set the language and ID number of the software. There is no special

HDTV Supply HD MATRIX SWITCHING
definition. Please set the ID number of the matriSxYStTEoM 0.
3. Selecting the input channel number and output channel number and clicking on the switch can quickly complete the switch control of the matrix. By switching all of them, the input channel can be switched to all the output channels.
4. In addition, the current scenario can be saved. Next time you select the saved scenario number, click the call to restore immediately to the last saved scenario.
5. You can also rename the input and output channels and save the invocation mode.
6. Some models of EDID can support online writing, and advanced settings can set scene polling switch.
7. Change the IP address of the Matrix.
Press the right key of the mouse on the position of the IP address and click `Setting.’

HDTV Supply HD MATRIX SWITCHING SYSTEM
Chapter 10: Common Faults and Maintenance
When the matrix peripheral image display device has ghosting, such as ghosting when the projector is not the main problem, in general, may be adjusted without the right projector or wire quality standards, with the corresponding projector button to adjust or replace the wire.
When the color is lost or no video signal output, the audio and video interface may be in bad contact.
When the remote control cannot control the matrix: 1. If the battery is dead, please replace the battery. 2. If the remote control is broken, please repair it.
When the serial port cannot control the matrix, check whether the communication port of the control software corresponds to the serial port of the connected device.
There is no corresponding image output when the matrix is switched: 1. check whether the corresponding input signal. (can be used oscilloscope or multimeter for testing) if there is no signal input, it is possible that the input line is broken or loose joints, try to replace the wire.
2. check the corresponding output signal. (can be used oscilloscope or multimeter for testing) if there is no signal output, it is possible that the output line is broken or has loose joints, try to replace the wire.
3. check whether the output port number is consistent with the controlled port number.
4. does not belong to the above three kinds of situations, and may host internal faults, please send professional maintenance.

HDTV Supply HD MATRIX SWITCHING
If the POWER lamp does not light, and the LCD iSsYSTnEoMt displayed, the operation is not responding, please check whether the power input is good.
The output image is disturbed, it is possible that the input and output devices do not have good grounding.
When pulling, and inserting audio video interface, if you feel there is a clear static, it is possible that the equipment power supply ground wire is not a good grounding, according to the correct method of grounding, otherwise easy to damage the host, shorten the life of the mainframe.
LCD display is normal, the communication port has a return code, but no image output or no audio output.
1. The audio and video interface may be loose and can be replaced. 2. A short circuit may be connected, try to replace the wire. 3. possible wiring break, try to replace the wire.
When buttons, communications, and remote control cannot be controlled, the host may have been damaged inside, please send for professional maintenance

HDTV Supply HD MATRIX SWITCHING SYSTEM
Chapter 11: Warranty Description
Please identify the user, from the date of purchase, who can enjoy a year of warranty service. In addition to postal, transportation, and other miscellaneous charges, warranty services are provided free of charge.
In the following circumstances, the company has the right to refuse to provide free warranty service, but can provide charge maintenance services: 1. Cannot provide the relevant purchase documents or product purchase certificate if the contents of the record do not match the product. 2. Products damaged due to bad weather, natural disasters caused by force majeure. 3. The product does not operate according to the installation instructions provided by the company to cause human damage. 4. Products without the authorization of the company to repair the damage caused by unauthorized. 5. Product failure and damage due to improper storage. 6. The appearance of the artificial scratch, break, stain, damage, etc.
In addition: in addition to the product itself outside accessories and packaging, are not within the scope of the warranty; this warranty does not include transportation costs and provide door-to-door service; after the product packaging has been opened due to damage and damage and related accessories and the loss will lead to the value of the products have discounts, so businesses should pay attention to the return of the product, and due to the return of the packaging cost and the cost of parts, provided by the return party.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>