Lasko S18654 Adjustable Large Room Pedestal Fan Instruction Manual

S18654 Adjustable Large Room Pedestal Fan

“`html

Product Information

Specifications:

• Model: S18654
• Product: Fan Blade
• Remote Control: Included

Product Usage Instructions

How To Install Your Fan Blade:

1. Slide the blade onto the motor shaft.

2. Align the groove on the blade hub with the pin on the motor
   shaft.

3. Gently press the blade onto the motor shaft until you hear a
   click.

If you don’t hear a click:

1. Check alignment of the fan blade with the pin.
2. Ensure the blade is securely pressed onto the motor shaft.
3. An audible click ensures secure installation.

Note: The fan blade should be flush with the rear grill
when installed correctly.

Where Is Your Remote Control Located?

When unpacking, find the remote control in the on-board storage
area at the back of the fan. Pull one side forward to release.

How To Remove The Plastic Tab From The Back Of Your Remote

Control:

1. Remove the battery cover using a coin to unlock it.
2. Remove the plastic tab from the remote control.
3. To reinstall, align dots with unlock icon and use a coin to
   lock the battery door.

Frequently Asked Questions (FAQ)

Q: What should I do if I cannot hear a click when installing

the fan blade?

A: Ensure proper alignment with the pin and securely press the
blade onto the motor shaft until you hear an audible click.

Q: Where can I find the remote control for the fan?

A: The remote control is located in the on-board storage area at
the back of the fan. Pull one side forward to release it.

“`

S18654 QUICK TIPS

How To Install Your Fan Blade

1

2

3

Pin Groove

Slide blade onto motor shaft. Align groove on blade hub with pin on motor shaft.

Gently press the blade onto the motor shaft until you hear a “click.”

Don’t Hear a Click?

Check to make sure that the fan blade is lined up with the pin. Next, make sure the blade has been securely pressed

onto the motor shaft. An audible click ensures the secure installation of the fan blade.

Viewing the fan blade from a side view, the blade should be flush with the rear grill when installed correctly. See below

Where Is Your Remote Control Located?

When you remove the parts from the box, the remote control can be found on the on-board remote storage area located on the back of the fan. (See photo to left)

To remove the remote. Pull one side of the remote forward to release.

How To Remove The Plastic Tab From The Back Of Your Remote Control

To Replace the remote. Place remote in groove. Snap in place by pressing center of remote to secure to the back of the fan.

1. Remove the battery cover. Use a

1

coin similar to a quarter to unlock

the remote control battery door. Turn

counterclockwise to unlock.

2. Remove the plastic tab from the remote control

3. To reinstall the cover, align the dots with the unlock icon on the remote. Use a coin similar to a quarter to lock the battery door. Turn clockwise to lock.

2

3

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>