Lasko T48310 Oscillating Tower Fan User Manual

Lasko T48310 Oscillating Tower Fan

IMPORTANT SAFETY INFORMATION

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following:
Read all instructions before using this Fan.

Warnings

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR PERSONAL INJURY, ALWAYS FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:

• DO NOT use this fan to ventilate areas where flammable liquids or vapors are used, stored, or are present, including paints, gasoline, varnishes, floor refinishing products, or solvents. ALWAYS read and follow all warnings and instructions on the containers for these products!
• ALWAYS be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this condition should be replaced by a qualified electrician.
• ALWAYS unplug the power cord when servicing, cleaning, or moving the Fan. DO NOT use the ON/OFF switch as the sole means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and unplug the Fan when not in use.
• BE CERTAIN that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or another power source.
• The Blue Plug™ on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be removed or tampered with. To reduce the risk of fire, electric shock, and personal injury, DO NOT attempt to remove, replace, repair, or tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device incorporated in this plug. Call 800-233-0268, Monday – Friday, between 8:00 a.m. and 5:00 p.m. Eastern for questions. If the plug warning label is missing or damaged, call the toll-free number for a replacement label.
  THIS FAN HAS A POLARIZED PLUG (one blade is wider than the other). This plug is designed to fit into the outlet only one way. Match the wide blade to the wide slot in the outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety feature. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.

CAUTION

• AVOID the use of extension cords, power strips, power taps, outlet-style air fresheners, or another cord-connected device, as these devices may overheat and cause a fire hazard.
• DO NOT route power cords under rugs, carpets, runners, or furniture. This may damage the cord or cause it to overheat creating a fire hazard.
• ALWAYS place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
• NEVER insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
• DO NOT block, cover or obstruct air flow to or from the fan while in operation.
• DO NOT use this Fan outdoors or near water or wet locations such as a bathtub, pool, or hot tub. Use of this Fan in a wet location may create a shock hazard.
• DO NOT route the power cord in or through areas such as doorways or where the cord may be damaged or create a tripping hazard.
• NEVER use a single extension cord to operate more than one Fan or other electrical device.
• DO NOT use this Fan in a window. Rain may create an electrical hazard.
• DO NOT use this Fan if it has been damaged or is not functioning properly.
• DO NOT operate any fan with a damaged cord or plug. Discard fan.
• THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008). This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry, or other animals are confined. Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
• THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008). This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical requirements for hazardous locations.
  NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user’s authority to operate this equipment.

TOOLS REQUIRED FOR ASSEMBLY (not included)- #2 Phillips Head Screwdriver

ASSEMBLY

1. For ease of assembly, lay the Fan down so that the front grill and control panel are facing up.
2. Assemble the Support Base Halves by interlocking the Bosses on Support Base A into the Boss Holes on Support Base B. Secure (2) #8 X 3/8″ Screws into the two outer holes in the bottom of the Base. (Figure 1)
3. Thread the Power Supply Cord through the large hole in the center of the Support Base Assembly. (Figure 2)
4. Align the Support Base Assembly with the Motor Base, noting that the cord channel on the bottom of the support base assembly should be towards the back of the Fan. Attach the Support Base Assembly to the Motor Base with 1/2″ Long M5 Screws. Make certain to align the Key on the Support Base Assembly with the Locating Notch on the Motor Base. (Figure 1) Gently pull any excess slack off the Power Supply Cord and place it in the Wire Locating Trough. (Figure 3)

REMOTE CONTROL

1. Install batteries (not supplied) as shown in Figure 4. The battery is a size “AAA”.
2. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
3. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.

OPERATION

This Fan may be operated by the Manual Controls located on the front of the unit or by the Remote Control (shown in Figure 4).

1. Place the Fan on a firm and level surface.
2. Plug the cord set into a 120-volt outlet.
3. Apply power to the Fan by pushing the Power Button ( ).
4. FAN SPEED: You may now adjust the fan speed to the desired level, (1 Low), (2 Medium), or (3 High) by pressing the Fan Speed Button ( ).
5. OSCILLATION: Press the Oscillation Button ( ) to start and stop the oscillation function.
6. TIMER FUNCTION: This fan is equipped with a timer. The timer can be set for 1 hour to 7 hours. Continue pressing the Timer Button ( ) to reach the desired time setting. To cancel the timer, press Timer Button ( ) until the lights are extinguished.
7. IONIZER: The ionizer function on this Fan will operate within any speed mode. Press the Ion Button ( ) once to turn this function on and a second time to turn it off. The Fan must be ON for the ionizer to be functional. When the ionizer is turned on it will assist in the purification of the room air.
8. After turning the Fan off, unplug the unit from the electrical outlet.

Warning

To reduce the risk of electrical shock and fire please observe the following instructions:

MAINTENANCE

• Always unplug the cord before moving, servicing, or cleaning.
• NEVER place the Fan in or near water.
• Clean the Fan only with a vacuum equipped with a brush attachment; the vacuum will remove the lint and dirt from inside the Fan.
• NEVER attempt to take apart the Fan.
• Clean the body of the Fan with a soft cloth only.
• NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.

TROUBLESHOOTING TIPS

• If your Fan fails to operate, see below for a probable cause and solution:
• Be sure the power cord is plugged into a working electrical outlet.
• If you have a problem that can not be resolved by the steps listed above, contact Technical Assistance at 1-800-233-0268, Monday through Friday, between the hours of 8:00 a.m. and 5:00 p.m. Eastern.
• SERVICING: For servicing, other than general user maintenance, please contact Customer Service at 800-233-0268, Monday through Friday, from 8 am-5 pm Eastern.
• STORAGE: Store the Fan with these instructions, in the original carton in a cool, dry place.
• LUBRICATION: The motor is permanently lubricated.
• DISPOSITION: Corrugated packaging materials are recyclable. For environmentally responsible disposal of this product, contact your local waste service provider or visit www.1800recycling.com®.

LASKO PRODUCTS, INC. LIMITED WARRANTY

(NOT VALID IN MEXICO)

WHAT THIS WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials.
HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.
WHAT LASKO WILL DO: Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same or comparable model. For all warranty claims, the product must be returned to Lasko Products, Inc. at customer expense with proof of purchase within the warranty period. Contact the Lasko customer service department to obtain a Return Authorization (“RA”). DO NOT return products without an RA or the warranty claim will not be processed.
WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed because of an accident, improper handling or operation, shipping damage, abuse, misuse, or unauthorized repairs made or attempted. This warranty does not cover shipping costs for the return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement. ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY), LAST ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR TRANSFERS THE PRODUCT, WHICHEVER FIRST OCCURS AND IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACEMENT OR REPAIR OF ANY HOUSE FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH LIABILITY SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state and province to province.
Proof of purchase is required before a warranty claim will be accepted.

FAQ’s

How do I assemble the Lasko T48310 Oscillating Tower Fan?

The assembly process may vary, but generally, you will need to attach the base to the fan unit using the provided screws or clips. Refer to the user manual for detailed assembly instructions specific to your model.

How do I turn on/off the oscillation feature?

The oscillation feature can usually be controlled by pressing the oscillation button or switch on the fan or using the remote control that comes with the fan. Consult the user manual for precise instructions on operating the oscillation function.

Can I adjust the fan speed?

Yes, the Lasko T48310 Tower Fan typically offers multiple fan speed settings. Use the fan speed control buttons on the fan or the remote control to increase or decrease the speed according to your preference.

Is the Lasko T48310 Tower Fan equipped with a timer function?

Yes, many models of the Lasko T48310 Tower Fan come with a timer feature. You can set the timer to automatically turn off the fan after a specified period. Check the user manual for instructions on setting the timer.

How do I clean the Lasko T48310 Tower Fan?

To clean the fan, start by unplugging it from the power source. Use a soft brush or vacuum cleaner attachment to remove dust from the fan's grills and blades. For more detailed cleaning instructions, refer to the user manual.

Can I use this fan to ventilate areas where flammable liquids or vapors are present?

No, you should not use this fan to ventilate areas where flammable liquids or vapors are used, stored, or are present, including paints, gasoline, varnishes, floor refinishing products, or solvents.

Can I use an extension cord with this fan?

It is recommended to avoid the use of extension cords, power strips, power taps, outlet-style air fresheners, or another cord-connected device, as these devices may overheat and cause a fire hazard.

Can I use this fan outdoors or near water?

No, you should not use this fan outdoors or near water or wet locations such as a bathtub, pool, or hot tub. Use of this Fan in a wet location may create a shock hazard.

How do I clean the fan?

Always unplug the cord before moving, servicing, or cleaning. Clean the Fan only with a vacuum equipped with a brush attachment; the vacuum will remove the lint and dirt from inside the Fan. Clean the body of the Fan with a soft cloth only. NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.

How do I operate the fan?

This Fan may be operated by the Manual Controls located on the front of the unit or by the Remote Control. Place the Fan on a firm and level surface. Plug the cord set into a 120-volt outlet. Apply power to the Fan by pushing the Power Button. You may now adjust the fan speed to the desired level, (1 Low), (2 Medium), or (3 High) by pressing the Fan Speed Button. Press the Oscillation Button to start and stop the oscillation function. This fan is equipped with a timer. The timer can be set for 1 hour to 7 hours. Continue pressing the Timer Button to reach the desired time setting. To cancel the timer, press Timer Button until the lights are extinguished. The ionizer function on this Fan will operate within any speed mode. Press the Ion Button once to turn this function on and a second time to turn it off. The Fan must be ON for the ionizer to be functional.

How do I troubleshoot if my fan fails to operate?

Be sure the power cord is plugged into a working electrical outlet. If you have a problem that cannot be resolved by the steps listed above, contact Technical Assistance at 1-800-233-0268, Monday through Friday, between the hours of 8:00 a.m. and 5:00 p.m. Eastern.

Can I use the Lasko T48310 Tower Fan at night?

Yes, the fan is designed for use during the night. It operates quietly and typically has a sleep mode or low-speed setting for a comfortable sleep environment.

Does the Lasko T48310 Tower Fan have a remote control?

Yes, the Lasko T48310 Tower Fan usually comes with a remote control that allows you to conveniently adjust the fan settings from a distance.

Can I adjust the direction of airflow?

While the Lasko T48310 Tower Fan doesn't typically have an adjustable direction feature, the oscillation function ensures that the airflow is distributed in a wide area.

How do I store the Lasko T48310 Tower Fan when not in use?

To store the fan, ensure it is unplugged and clean. Use the cord wrap feature, if available, to neatly wrap the power cord. Place the fan in a clean and dry location, preferably in its original packaging or a suitable protective cover.

Download This PDF Link: Lasko T48310 Oscillating Tower Fan User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>