ZEEHOO HT-Z24 Multifunctional Wireless Charger User Manual

August 30, 2024
ZeeHoo

ZEEHOO HT-Z24 Multifunctional Wireless Charger

Product Information

Specifications

  • Model No.: HT-Z24
  • Input power: 27W (MAX)
  • Package Size: 11174131 mm
  • Input voltage: 5V/3A 9V/3A
  • Output power: 15W/10W/7.5W/5W
  • Charging efficiency: 70%-80%

Product Usage Instructions

Connecting the Charger

  1. Connect the wireless charger to the AC power supply using the provided power adapter.
  2. Once connected, the indicator light will turn red, indicating that the charger is in standby mode.

Charging Devices

  1. Place your Qi standard compatible device on the appropriate charging area on the wireless charger.
  2.  Ensure your device has a built-in quick charge/normal charge wireless receiver or an outer-face wireless charging receiver.
  3. The charger supports devices with wireless charging receivers in their protection cases.
  4. The charger offers different output power options (15W/10W/7.5W/5W) for efficient charging.

Cleaning and Maintenance

  1. Keep the charger away from water or other liquids to prevent damage.
  2. Power off the charger before cleaning it to ensure safety.
  3. Maintain an operating environment temperature between 1-45 degrees Celsius.

FAQ

  • Q: What devices are compatible with this wireless charger?
    A: Devices with built-in quick charge/normal charge wireless receivers, outer- face wireless charging receivers, or receivers in protection cases are compatible.

  • Q: How do I know if the charger is working?
    A: When connected to power, the indicator light will turn red, indicating that the charger is in standby mode and ready to charge your device.

MULTIFUNCTIONAL WIRELESS CHARGER

User Manual

Product Introduction

  • Thanks for purchasing our product multifunctional wireless charger.
  • It adopts high-end quick charge IC ,with its luxury and compact design, it can be compatible with any mobile phones with QI standard. it can perfectly compatible with Sam sung, Apple fast charge wireless function, to save more time effectively and improve your charging experience.

Product Outline

Applicable Devices

  1. Devices with built-in quick charge/normal charge wireless receiver.
  2. Devices with outer-face wireless charging receiver.
  3. Devices with wireless charging receiver in its protection case .

Note: All devices must be Qi standard.
Instructions

  1. The wireless charger is connected to the AC power supply through the power adapter. The wireless charger is turned on, the indicator lights the red light, and enters the standby mode.
  2. When the mobile phone or TWS wireless charges, the indicator is bright and green. When the watch is charged, the color of the indicator light has not changed.(Frequent flickering lights of foreign body detection indicators indicate that there are foreign bodies)(Note: If the watch has no electricity , charging will be slower, it is recommended that the watch is close to 10% please charge, when there is no electricity, charging is slower, you may need to wait for 1 hour, you need to have patience!)
  3. The small night light touch switch is located on the side of the product base. Press it once, the night light is turned on, and the short press is off the second time. When the night light is turned on, long press the lights to gradually weaken or gradually enhance.

Specifications

  • Model No.: HT-Z24
  • Input power : 27W (MAX)
  • Package Size: 11174131mm
  • Input voltage: 5V/3A 9V/3A
  • Output power: 15W/10W/7.5W/5W
  • Charging efficiency: 70%-80%

Standard Accessories

  • 1* Multifunctional Wireless Charger
  • 1* User Manual
  • 1* USB Cable

Attention

  1. Please keep the charger away from water or other liquid.
  2. If you need to clean the charger, please make sure it is power off.
  3. Using Environment temperature remain 1-45℃ degree.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

  • If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.

The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals