ZeeHoo DUOXX-X3 Dual Coils Wireless Car Charger User Manual
- June 14, 2024
- ZeeHoo
Table of Contents
ZeeHoo DUOXX-X3 Dual Coils Wireless Car Charger
- SCAN THE OR CODE TO GET THE MORE INFORMATION
Product Overview
- Metal Frame Auto-clamps
- Bottom Brocket
- LED Indicator
- Wireless Charging Coil Area
- Type-C Charging Port
- Nut
Suction Mount Installation
- Clean the flat dash.
- Peel off the red film and press the 3M pad to the dash hard. Let it sit for 24 hours before setting the suction cup on it.
- Peel off the film and push the suction base to the 3M pad hard
- Press the locker.
- Open the buckle to set the bracket arm to a proper angle.
- Press the buckle. *Let it sit for 3 mins before placing your phone on it.
Air Vent Mount Installation
Compatibility
- Choose the right adapter: a 9V/2A or 12V/2A QC 3 car charger adapter(NOT INCLUDED) is required for fast charging. ZEEHOO 45W car charger is RECOMMENDED.
- Using multiple ports on the same adapter can slow down charging.
- Choose the correct case: a case that is flat and up to 3mm is required for fast charging.
- Use the included charging cable.
Specification
Status LED
The LED Indicator displays the status of the car mount charger.
Thank You for purchasing a zeeHoo product. Our goal is to make sure that
you are completely satisfied with your purchase. Please contact us at any time
24/7/365
if you have any questions, concerns or need to submit a warranty request.
support@zeehoo.info
@ izeehoo.com/page/contact
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>