ZeeHOO PowerDrive CDC-40 Double Charging Coils Wireless Car Charger User Manual

June 9, 2024
ZeeHoo

ZeeHOO PowerDrive CDC-40 Double Charging Coils Wireless Car Charger

ZeeHOO-PowerDrive-CDC-40-Double-Charging-Coils-Wireless-Car-Charger-
PRODUCT

PRODUCT OVERVIEW

ZeeHOO-PowerDrive-CDC-40-Double-Charging-Coils-Wireless-Car-Charger-
FIG-1ZeeHOO-
PowerDrive-CDC-40-Double-Charging-Coils-Wireless-Car-Charger-
FIG-2

INSTALLATION

  1. Unscrew the nut, let ball go through the nut.
  2. Fasten the nut into the spherical top and push the nut forcibly into the round hole, adjust the car mount to the optimal viewing angle, then tighten the nut to secure.
  3. STEP 1 Clean the dashboard/windshield and peel the protective film from the suction cup bottom.
  4. STEP 2 Release the locker and then push the suction cup harder against the dashboard/windshield surface (Flat surface is preferred, if it isn’t, please use the sticky pad (NOT INCLUDED IN THE PACKAGE) to make it work better).
  5. STEP 3 Push the locker twice to the bottom to ensure firmly attached.
  6. STEP 4 The gel on the bottom is reusable, you can wash it with warm water and let it dry naturally to use again.
  7. STEP 5 Please do not remove the suction cup once it was set down, and please make sure there is no dust or hair on the gel surface

DASHBOARD

WINDSHIELD SHEET INSTALLATION

Air Vent Mounting Steps

  1. Unscrew the nut, let ball go through the nut. Fasten the nut into the spherical top and push the nut forcibly into the round hole, then tighten the nut to secure.
  2. Insert the adjustable hook into the car’s vent blades, then rotate the tighten knob to make it bite the car vent firmly.

Horizontally air vents type

ZeeHOO-PowerDrive-CDC-40-Double-Charging-Coils-Wireless-Car-Charger-
FIG-10

Round air vents type

ZeeHOO-PowerDrive-CDC-40-Double-Charging-Coils-Wireless-Car-Charger-
FIG-11

Vertically air vents type

ZeeHOO-PowerDrive-CDC-40-Double-Charging-Coils-Wireless-Car-Charger-
FIG-12ZeeHOO-
PowerDrive-CDC-40-Double-Charging-Coils-Wireless-Car-Charger-
FIG-13

Note:

  • For 15W,10W.7.5W fast charging mode, QC 3.0 car charger adapter is required as its power source.
  • Please kindly note: the QC 3.0 Car Adapter is not included in the package.
  • If the car mount charger is overheating, it will automatically turn off to let itself cool down before resuming charging.
  • The wireless charging function is sensitive to temperature.
  • The in-car high temperature may pause charging or slow down the charging speed, so it is recommended to turn on the cold air conditioner in your car to avoid overheating.

Smart Coil Alignment

There are two charging coils designed. You could adjust the bottom tray to make your phone’s charging coil to align with the 2 charging coils to get better charging performance

ZeeHOO-PowerDrive-CDC-40-Double-Charging-Coils-Wireless-Car-Charger-
FIG-14

Supports most vent types

Do not place any foreign objects between your smartphone and the car mount. Metal objects, credit cards, door keys, coins or NFC cards will cause overheating issue.

Auto-Clamping & Release Function

Press the side button, the arms will open automatically. After putting your phone in the cradle, it will clamp your phone tightly. And you could take out your device by pressing the release button.

Compatibility

Smartphone   Car Charger   Power Output
Qi-Compatible Phones   SV= 2A   5W

iPhone13/13 mini/

13 Pro(Max)/12/12 mini/

12 Pro[Max)/11/11Pro

(Max) XS(Max)/XR/8/

|  | 9V= 2A

12V= 1.5A

Quick Charge 3.0

|  |

7.5W

8 Plus/X|  |
Samsung Galaxy Z Flip3/|  |  |  |
Z Flip/ Z Folc:13/ Z Fold2/ S22/522•/S22 Ultra/S21/ S201S10/S9/S9+/S6/S6+/

S7 edgefs6 edget

| 9V= 2A

12V= 1.5A

Quick Charge 3.0

|

10W

/Note 20/Note 10|  |
/Nota lQ♦jPlus)|  |
/Note 9/6/7/5,etc.|  |
LG VS0/V40/V30+

N30/V40 ThinQ

/GS ThinQ/GBS/

G7 ThinQ/G7

|  |

9V,:,, 2A

12V- 1.5A

Quick Charge 3.0

|  |

15W

Specification

Input DC12V-1.5A 9V-1.67A SV-2A
Output 5W,7.5W,10W,15W
Size CL”W”HI 72.5″56.5″109mm
Product Standard Qi
Charging Induction Distance :i!:10mm
Charging Efficiency 80%
Material ABS+Tempered Glass

Status LED

The LED indicator displays the status of the car mount charger.

Status LEO Indicator
Charging mobile device/ Fully charged Solid blue
Standby Solid green

Metal or other foreign objects detected

Using an incompatible car charger or cable

| Flashing blue and green
Overheating, short-circuit problem detected| Light off

Important Safety Instructions

  • Avoid dropping.
  • Do not disassemble.
  • Do not threw it into water or fire.
  • Do not use it in a humid environment.
  • Do not use it once the maximum ambient temperature exceed 40° C.
  • Do not put items containing magnets or chips (ID card, Bankcard) on, or they may become invalid.
  • Do not put metal or coin on it while charging, will cause over-heating.
  • Do not place open flame sources on it, such as candles.
  • Do not install while driving.

Thank You for purchasing a ZEEHO0 product. Our goal is to make sure that you are completely satisified with your purchase. Please contact us at any time 24/7/365 if you have any questions, concerns or need to submit warranty request.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals