ZEEHOO PowerDrive IC30D Car Charger Mount User Manual

ZEEHOO PowerDrive IC30D Car Charger Mount

Thank You
For purchasing a ZEEHO0 product. Our goal is to make sure that you are completely satisified with your purchase. Please contact us at any time 24/7/365 f you have any questions, concerns or need to submit warranty request.

Product Overview

Fitting Included in the Accessories Package

• Cleaning Wipe
• Protective Film (Single-use, not reusable)
• Metal Ring (Single-use, not reusable)
• Match-up Card

Operating Instructions

The magnetic car charger be used in the following 3 usage conditions, Please choose the corresponding usage according to the model of your mobile phone.

• iPhone 12/13 mobile phone: Direct magnetic attraction is OK.
• iPhone 12/13 with original or magnetic case: Direct magnetic attaction is OK.
  • iPhone 12/13 +Magnetic Case
  • Magnetic Car Charger
• Other situations (iPhone 12/13 with non-original non-magnetic case, or non-iPhone 12 bare machines/phones with a mobile phone case) : it shall be used by matching up with metal rings.

Assembling the Metal Ring
There are two ways to paste the metal ring, which are listed as follows. Please choose between them according to your needs.

• Stick on the back of the mobile phone
• Stick on the back of the phone case

Note:
To better protect your phone, it is recommended that youpaste the metal ring on the back of the phone case. Please use this product with a phone case that has a flat and smooth back. It is not recommended to attach the metal ring to the phone case with rough surface (such as frosted surface), which would affect the adsorbing effect. Before use, Please be sure to use the phone’s match-up card to aim at the position before the metal ring is pasted.

STEP 1:
Use a cleaning wipe to clean the back of the phone (or phone case) where the metal ring needs to be pasted.
STEP 2:
Select the match-up card that matches the model of the phone, (remove the middle semicircle) and aim it at the edge at back of the phone phone case.
STEP 3:
Remove the release paper of the protective film , aim it at the half-circle of the match-up card before pasting it on the back
the phone (or phone case).
Note: After pasting, squeeze out the ait bubbles inside the protective film.

STEP 4:
Tear off the release paper of the metal ring and paste the metal ring onto the protective film.

STEP 5:
Press firmly along the metal ring to secure it.
STEP 6:
Remove the match-up card, and the installation is completed.

Important Reminders:
Please wait 12 hours before use to ensure a strong-adhesive gripping.
The ring will only adhere to smooth PC or TPU without a fingerprint-resistant coating. Silicone/leather/glass case, heavy case and uneven case is NOT recommended.

Installation

• Unscrew the nut, let ball go through the nut.
•  Fasten the nut into the spherical top and push the nut forcibly into the round hole, then tighten the nut to secure.
• Twist the knob to open the clip and clamp it onto your air vents, making sure the clip is attached securely, then adjust the magnetic car charger to an optimal viewing angle.
• Snap your phone on the mount to get charged.

Charge Your Smartphone Effectively

Please kindly use a QC 3.0 car charger (NOT INCLUDED) as a power source to get enough power for wireless fast charging, and make sure to plug the USB-A Port into your car charger adapter.

Note:
The wireless charging function is sensitive to temperature. The in-car high temperature may pause charging or slow down the charging speed, so it is recommended to turn on the cold air conditioner in your car to avoid overheating. If the car mount charger is overheating, it will automatically turn off to let itself cool down before resuming charging. For 15W,10VW,7.5W fast charging mode, QC 3.0 car charger adapte is required as its power source. Please kindly note: the Qc 3.0 Car Adapter is not included in the package.

The Suitability of Car Air Vent
The air vent clip could be compatible with horizontal and Vertical air vent outlets. But it cannot support Intensive circular or special-shaped air vent outlets

Compatibility

Specification

Product Features

Built-in N52 magnets keep your phone securely over bumpy roads. FOD function: Intelligently recognized metal or other objects on the charger or your phone, will stop charging for protecting. Full protection your devices from over- current, over-volt, short circuit and high temperature. Small size keeps your car clean and tidy.

Important Safety Instructions

• Avoid dropping.
• Do not disassemble.
• Do not threw it into water or fire.
• Do not use it in a humid environment.
• Do not use it once the maximum ambient temperature exceed 40° C.
• Do not put items contain magnets or chip(ID card, Bank card)on it,
• will become invalid.
• Do not put metal or coin on it while charging, will cause over-heating.
• Do not be placed open flame sources, such as candles on this item.

suppori@zeehoo.info
izeehoo.com/pages/contact

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>