HUMMER H212 CPU Multi Socket Intel Instruction Manual
- August 29, 2024
- HUMMER
Table of Contents
HUMMER H212 CPU Multi Socket Intel
Notice
Please read this user manual carefully before installation to get the cooler·
the best performance by optimized installation. NOX Xtreme is not responsible
for any damage to the product or injury caused by incorrect installation or
user· s carelessness. The cooler may cause an interference with a few
motherboards and if you face an interference between the Hummer cooler and
your motherboard. please stop installing the cooler. Be sure to be careful not
to hurt yourself with the sharp fins while installing 6 and disassembling the
cooler. Do not move the cooler around after the installation to prevent CPU
damage. Please. do not use the cooler for any other usage apart from the
original purpose.
Warranty
For your warranty claims. please contact Nox Xtreme overseas distribution partners in your country. Find de distribution partner list at www.nox- xtreme.com
- Warranty : 2 years from purchasing date. (Depending on the laws of each country,)
- URL : www.nox-xtreme.com
- E-mail: support@nox-xtreme.com
Components description
- Bracket mounting screws
- LGAI5X mounting bracket
- LGA2011/66 mounting bracket
- AMD mounting bracket
- LGA115X backplate
- Thermal grease
- Fan clip
Second fan assembly
- Place the hook for the fan on the cooler.
- Apply pressure to pass the wire through the fan.
- Insert the end of the hook into the holes of the fan.
Intel LGAl7DD installation
- Install the Intel bracket onto the cooler. Stick the backplate onto the back
- Apply a thin thermal grease layer to the CPU surface. of the motherboard.
- Put the heatsink onto the CPU. tightening the bracket screws into the backplate to secure the heatsink firmly.
Intel LGA2066/2011 installation
- Apply a thin thermal grease layer to the CPU surface.
- Put the heatsink onto the CPU, tightening the bracket screws into the mounting nuts on the MB.
NOTE: Please refer to the bracket/backplate illustration to choose the correct mounting postion.
AMD installation
- Remove the original AMD plastic retention tray, but keep the backplate.
- Apply a thin thermal grease layer to the CPU surface.
- Put the heatsink onto the CPU, tightening the bracket screws into the backplate to secure the heatsink firmly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>