GAMDIAS TALOS E3 MESH Elite Mid Tower PC Case Installation Guide
- June 16, 2024
- GAMDIAS
Table of Contents
QUICK INSTALLATION GUIDE
SPECIFICATIONS
| SERIES | TG Series |
|---|---|
| Product Name | TALOS E3 MESH Elite/ TALOS E3 MESH Elite WH |
| Case Type | MID Tower |
| Dimension (L x W xX H) | 440 x 230 x 480 mm |
17 x 9 x 18.6 inch
Chassis Dimension (L x W x H)| 430 x 230 xk 470 mm
16.9 x 9 xX 18.5 inch
Motherboard Support| E-ATX, ATX, Micro-AT X, Mini-ITX
Expansion Slots| 7+3
Material| SPCC, ABS, Tempered glass
Window| Left
Radiator Support| Top: 860mm, 280mm
(It is recommended to remove the rear fan before installing the 360mm
radiator.)
Front: 360mm, 280 mm
Rear: 120mm, 140 mm
Fan Support| Top: 3 x 120mm, 2 X 140mm
Front: 3 x 720mm, 2 xX 140mm
Pre-installed Fans| Rear: 1x 120mm, 1 xX 140mm
Front: 2 xX 140mm ARGB PWM Fans
Rear: 1x 720mm ARGB PWM Fan
Pre-installed Control BOX| NO
Motherboard Sync| 5V 3-Pin Addressable Header
Drive Bays| 2×3.5″0r 1x 2.5″4+1x 3.5″(HDD Cage)
4x 2.5″
Clearance| CPU cooler height limitation: 180mm
VGA length limitation: 390mm
PSU length limitation: 200mm
I/O Port| USB 3.0 x1, Type C x 1,
HD Audio x1, LED Control x1
EXPLODED VIEW & PARTS
PARTS
| 0 | Chassis Body |
|---|---|
| 1 | Tempered Glass Side Panel |
| 2 | Right Side Panel |
| 3 | Top Dust Filter |
| 4 | Steel Mesh Front Panel |
| 5 | IO Port |
| 6 | 140MM ARGB PWM Fans |
| 7 | HDD Cage |
| 8 | 120MM ARGB PWM Fan |
ACCESSORY
| FIGURE | PARTS NAME | QTY | USER FOR |
|---|---|---|---|
| Stand-off 4.75 x 9.5 x 6.5mm | 3 | Motherboard | |
| Screw #6 x G6 mm | 6 | PSU | |
| Screw #6 x 5mm | 9 | HDD |
| Screw M3 x 5mm| 18| 2.5″
HDD/Motherboard/ODD
| CableTie| 5| Cable Management
SIDE PANEL REMOVAL
Remove the side panel
MOTHERBOARD INSTALLATION
Lay down the chassis
Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
Place the PSU in proper location
3.5″ & 2.5″ HDD INSTALLATION
A. 3.5″ HDD
Align the HDD into the mounting holes and screw in.
B. 2.5″ SSD
Align the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
| Top | 3x 120mm or 2 x 140mm |
|---|---|
| Front | 3X 120mm or 2 x 140mm |
| Rear | 1x 120mm or 1 x 140mm |
RADIATOR COMPATIBILITY
Note: It is recommended to remove the rear fan for 360mm radiator installation at the top
| Top | 360 mm or 280 mm |
|---|---|
| Front | 360 mm or 280 mm |
| Rear | 120 mm or 140 mm |
I/O PORTS
- Power Button
- LED Control¹
- USB 3.0
- Headpnone
- Microphone
- Type-C
1. Sync With Motherboard : Press and Hold the Fan LED Control Button for 3 Seconds.
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.