Fotodiox 100WB PRO LED100wb 56 Studio LED Instruction Manual
- June 10, 2024
- FotodioX
Table of Contents
Fotodiox 100WB PRO LED100wb 56 Studio LED
Instruction
Plug in all cords in order as pictured above:
Cord A goes from a standard outlet to the black end of Cord B. The silver end
of Cord B connects to the corresponding end of Cord C. The other end of Cord C
plugs directly into the 1 OOWB (label led as D).
To turn the light on and/or increase brightness, turn the knob circled in
green clockwise.
To turn the light off and/or decrease brightness, turn the knob circled in
green counterclockwise.
To connect Balcar-mount-compatible light modifiers, move one of the tabs circled in red in the direction of the red arrows. The tabs circled in cyan will move towards the center of the light, allowing you to add the modifier. Release the tab circled in red to lock the modifier onto the light.
To connect an umbrella to the light, loosen the knob circled in magenta. Slot the center rod of the umbrella in the same position as the yellow line above and tighten the knob circled in magenta.
Button A toggles the light on and off.
Button B controls the light’s intensity.
Button C has no function.
Button D is used for pairing lights to remote.
- To reprogram/re-pair the remote to the 1 00WB, press the “A” and “D” button simultaneously.
- Turn on the light that you want the remote to operate.
- The remote is now paired to the light.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>