GCteq GF-01Mini-12V Embedded Wireless Charger Instruction Manual

GCteq GF-01Mini-12V Embedded Wireless Charger

Specifications:

• Product Name: Embedded wireless charger GF-01Mini
• Model: GF-01Mini
• Input Power: 12V DC
• Wireless Charge Output Power: 15W Max, downward compatibility 10W/7.5W/5W
• Wireless Charging Transmission Distance: 3-8mm
• Protection: Over current, over voltage, over temperature, short circuit, FOD foreign body detection
• Size: 240.00 mm x 240.00 mm

Product Usage Instructions

Name of Parts:

• Electronic components
• Plastic casing
• Electroplated aluminum alloy parts
• Non-electroplated metal parts

Hazardous Substance Declaration:
This product is designed with environmental considerations to minimize pollution and harm to human life and property. It meets the standards set for harmful substance content.

Product Warranty Instructions:
In case of damage caused by improper use, maintenance, or lack of valid proof of purchase, only charging maintenance will be provided. Make sure to keep the invoice or proof of purchase for warranty claims.

FCC Statement:

• Manufacturer: GCteq Wireless (Shenzhen) Co., Ltd
• Website: http://www.gcteq.com

Installation Instructions:

1. Open a 59.5-60mm diameter through-hole in the furniture at the appropriate position.
   • Note: The overall thickness of the product is 15mm, and the soft material thickness of the hole should not exceed 5mm.
2. Adjust the position of the product and install it into the hole.

FAQ:

Common Product Faults:

• Phenomenon: Cannot start charging
• Cause:

1. The power supply does not meet requirements
2. Unstable connection of power interface
3. The charging distance is out of range
4. There are other metal objects in the charging area

• Remedy:

1. Replace the adapter that matches requirements
2.  Reinsert the power socket securely
3. Ensure using within the specified charging distance
4. Remove any metal foreign bodies from the charging area

• Phenomenon: Charging is slow due to high product temperature
  • Solution: Please wait until the temperature drops to room temperature before using the device.

Matters Need Attention:
Follow the provided instructions carefully to ensure proper installation and usage of the GF-01Mini wireless charger.

GF-01Mini Series Product instruction

Common product faults

1. The power supply does not meet requirements
2. Unstable connection of power interface
3. The charging distance is out of range
4. There are other metal objects in the charging area

|

1. Replace the adapter that match
2. Reinsert the power socket
3. using within the specified distance
4. Remove metal foreign bodies

Charging is slow| The temperature of product is too high| Please wait until the temperature drops to room temperature before using the device

Hazardous Substance Declaration
This mark is the product pollution control mark, the number of which represents the environmental service life. In this period of time, under normal conditions of use harmful substances will not cause greater pollution to the environment or damage to human life and property

Product Warranty Instructions

Wireless charger product after-sales service strictly in accordance with Law of the PRC on the Protection of the Rights and Interests of Consumers, and Product Quality Law of the People’s Republic of China Adopted to provide After-sales service.
The services are as follows:

1. Within 7 days from the next day after purchase (sign for), if this product has performance failure, you can enjoy free return or exchange service after being tested and determined by the after-sales service center;
2. Within 15 days from the next day after you purchase (sign for), if this product has performance failure, you can enjoy free exchange or repair service after being tested and determined by the after-sales service center;
3. Within 1 year from the next day after you purchase (sign for), if this product has performance failure, you can enjoy free repair service after being tested and determined by the after-sales service center.

Nonwarranty regulations
In one of the following cases, we don’t offer three guarantees and only charging maintenance will be provided:

1. Damage caused by improper use, maintenance and storage of consumers;
2. Damage caused by unauthorized service provider;
3. There is no valid invoice or proof of purchase;
4. Damage caused by majeure.

FCC STATEMENT

1. This device may not cause harmful interference, and
2.  This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

• Manufacturer: GCteq Wireless (Shenzhen) Co., Ltd
• Website: http://www.gcteq.com
• Checked
• Certificated of qualification

Introduction

Extension cord version

Parts list

Installation

1. Open a 59.5-60mm diameter through-hole in the appropriate  position of furniture, such as table, sofa armrest, etc..
   ( Note: The overall thickness of the product is 15mm, the thickness of the soft material of the hole should not exceed 5mm)

2. Adjust the position of the product and install it into the hole.

Specification

• Over current, over voltage, over temperature, short circuit,
• FOD foreign body detection

Size| Φ72.1mm×16.7mm

Matters need attention
Please read and follow the instructions carefully before installing and using this product:

1. Please use the original power adapter of this product to provide power for the wire-free charger.
2. Make sure there are no metal objects between the wireless charger and the mobile phone while phone is charging, to prevent metal objects from being heated by mistake.
3. Please do not place magnetic cards such as bank cards and corporate cards in the charging area to avoid damaging.
4. In order to get a better wire-free charging, please do not exceed the maximum charging distance of the product.

Instructions

1. Make sure that your phone supports wireless charging, because the wireless charging requires the support of the wireless induction coil built into the phone(hardware);
2. When you power on the wireless charger, please make sure there is no magnetic object (metal, magnet, etc.) in the charging area, then switch on the power, and place the mobile phone in the charging area;
3. The wireless coil of different phones is located in different locations. The sensor area is generally located in the center of the phone. You need to make sure that the wireless coil of the phone is aligned with the center of the wireless charging area. When charging starts, the screen will light up to show the charging prompt;
4. You need to pay attention to the limitation of charging distance for wireless charging. The distance between the phone and the wireless charger should not exceed the maximum charging distance of the product.

DIMENSIONS

• LENGHT: 240.00 mm
• WIDTH : 240.00 mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>