cudy POE15 Outdoor Gigabit PoE Plus Extender User Manual
- August 29, 2024
- cudy
Table of Contents
User Manual
Model: POE15
Hardware Connection
Description
Cudy Outdoor Gigabit PoE+ Extender helps install PDs (such as IP Security Cameras, wireless access points) at greater distances than 100 meters. By connecting PoE+ Extender for every extra 100 meters of cable, both Ethernet and PoE can be extended to up to a total distance of 200 meters. It does not require any additional power supply , the connected PDs is fed by an single PoE switch or mid-span, which simplifies installation. Cudy Outdoor PoE+ Extender has an IP67 waterproof enclosure and includes waterproof connectors on both the input and output sides. With surge protection function, working temperature is -25 ° C to 55 ° C, can withstand severe weather.
Features
- IP67 waterproof enclosure for outdoor use
- IEEE802.3at / IEEE802.3af Compliant
- 10/100/1000Mbps Ethernet Ports
- Wall-Mount design for any application scenario
- Easy plug-and-play installation
- No additional power supply is required
- One PoE extender extends additional 100 meters for PoE network
- Support up to 3 PoE Extenders for a total extension of 400 meters
- 6KV surge protection for power and data ports (requires ground wire)
Specifications
| Model | E15 |
|---|---|
| No. of channels | 1(PoE IN) into 1(PoE OUT) |
| Pass Through Data Rates | 10/100/1000 Mbps half/full duplex |
| Power over Ethernet input | Pin Assignment and Polarity: Both 1/2, 3/6 and 4/5, |
7/8
Power over Ethernet Output| Pin Assignment and Polarity: 1/2 (+), 3/6(-)
Output Power: up to 22W
Connectors| Shielded RJ-45, EIA568Aand 568B
Network cables| Shielded category 5 (or higher)
Mounting| Wall or shelf
Environment| Indoor or Outdoor
Operating Ambient Temperature| -10 to45°C
Operating Humidity| Maximum 90%, Non-condensing
Storage Temperature| -20 to 60°C
Storage Humidity:| Maximum 95%, Non-condensing
Regulatory Compliance| IEEE 802.3af (PoE), IEEE 802.3at (PoE+)
Dimensions| 185mm x 45mm x 45mm
Maximum Distances for Power Sources
Multiple PoE Extenders can be connected every 100 meters to obtain greater
distances. The actual figures depend on operating conditions. The range is over
24AWG or heavier Cat-5e or Cat-6 cable except where specified.
Examples for medium power PoE Devices (that are PoE Class 2, or require under
6 watts)
| PoE Source | Maximum Distances |
|---|---|
| PoE switch (802.3af,Output voltages 50V) | 300M |
| 15W mid-span (802.3af,Output voltages 50V) | 200M |
| PoE+ switch (802.3at,Output voltages 50V) | 200M |
| 30W mid-span (802.3at,Output voltages 50V) | 300M |
Examples for full power PoE Devices (that are PoE Class 0 or 3, or require
under 12 watts).
Examples for PoE+ Devices (that are PoE Class 4 that under 22 watts, or
802.3at compliant).
| PoE Source | Maximum Distances |
|---|---|
| PoE switch (802.3af,Output voltages 50V) | Not applicable |
| 15W mid-span (802.3af,Output voltages 50V) | Not applicable |
| PoE+ switch (802.3at,Output voltages 50V) | 200M |
| 30W mid-span (802.3at,Output voltages 50V) | 200M |
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of
conformity may be found at http://www.cudy.com/
Support and Warranty
For support and warranty, please visit: http://www.cudy.com/.
Specifications are subject to change without notice. Cudy is a registered
trademark of Shenzhen Cudy Technologies Co., Ltd. Other brands and product
names are trademarks or registered trademarks of their respective holders.
Copyright©Shenzhen Cudy Technology Co., Ltd. All rights reserved. EU Address:
Otto esser 2c, 65451 Kelsterbach, Germany