UV 15 Poolsquad UV Instructions
- August 29, 2024
- Pool
Table of Contents
Poolsquad® UV / Ultra Low Salt
Hybrid + pH regulator
BENEFITS
- Ultra Low Salt ® technology: operate at any salt level higher 0,5 g/l
- Installation of the electrode at the reactor outlet to limit the destruction of chlorine by UV rays
- Time-based adjustment of UV and electrolysis operation
- Integrated flow sensor
- Drain valve at the base of the reactor for easy replacement of the UV lamp
- Simplified maintenance of the electrode without draining the reactor
- Light well for visualising lamp operating status
- Compatible with 50 or 63 mm pipework for easy installation
- Plug & Play ORP option and models with amperometric control available
- Bluetooth remote control with e-Pool ® app
FEATURES
- Smart Power: current monitoring ensuring stable production
- Ultra Low Salt ® technology: operate at any salt level higher 0,5 g/l
- Ultra-violet sterilization
- Predictive and proportional pH regulation in acid (pH-) or basic (pH+) according to injection history
- Low mode to reduce chlorine production, when cover closed or bubbles cover installed
- Super boost mode: 125% super chlorination for up to 24 hours to overcome an increased need of disinfectant
- Automatic winterization and restart from 15°C
- Safeties: lack of water, low salt, cell fault, unreached setpoints, pH setpoint overrun and overfeeding, UV lamp life, UV lamp fault, flow rate
- Multilingual alarm message: origin of the malfunction indicated by written message
- Log of events
- Self-diagnosis programme for easy maintenance
| Model | Pool volume (m 3 ) | Flow (m 3 /h) | Reference |
|---|---|---|---|
| Poolsquad UV 15 | 50 | 15 | ELPH24NPSP-G5VX15 |
| Poolsquad UV 25 | 100 | 25 | ELPH24NPSP-G5VX25 |
| Poolsquad UV Ampero 15 | 50 | 15 | ELPA24NPSP-G5VX15 |
| Poolsquad UV Ampero 25 | 100 | 25 | ELPA24NPSP-G5VX25 |
| Kit Plug & Play ORP | KIT16ORPPOO1 |
Technical specifications
| Display | LCD 2 lines |
|---|---|
| pH pump flow (1/h) | 1,8 |
| pH setpoint adjustment | 6,8 to 7,6 |
| Calibration pH probe | 2 points pH 7 and pH 10 |
| pH probe | Black |
| Corrective solution | pH- or pH+ |
| Type of regulation | predictive |
| pH pump type | peristaltic |
| Polarity inversion adjustment | from 2h to 24h in increments of 1h |
| Chlorination setpoint adjustment | time slot |
| UV lamp power (watts) | 60 ou 90 |
| UV wavelength | 254 nm |
| UV lamp lifespan | 16 000 hours’ |
| Minimum UV time slot* | 15 min |
| Minimum electrolysis time slot** | 4h |
| Reactor height (mm) | 787 (50m3) / 1087 (100m3) |
| Reactor diameter (mm) | 350 |
| Control panel size (mm) | W 266 x H 363 x D 167 |
INSTALLATION DIAGRAM
CONTENT
- Control box
- Hybrid reactor (electrode & lamp)
- Cell cable (2m)
- pH Black probe
- Calibration solution pH 7 & pH 10
- Probe holder, injection connector
- Accessories holder with plugs
- Flow sensor
- Low water/salt/tempertaure sensor
- Grounding electrode
- Power cable
- Reducer Ø 63/50 mm x4
OPTIONS
- Empty pH can sensor
- 2 years warranty extension on electrode
- e-Pool Connect connected Pool kit
- Kit Plug & Play ORP
WARRANTIES
2 years Box
2 years Box Electrode ULS ®
3 years
Probe pH Black
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>