EPOMAKER Galaxy70 Type-C Mechanical Keyboard User Guide
- August 28, 2024
- EPOMAKER
Table of Contents
EPOMAKER Galaxy70 Type-C Mechanical Keyboard
WINDOWS(FN+A)
MAC OS (FN+Sl
FUNCTION KEY COMBINATIONS
LIGHT EFFECTS
PAIRING BLUETOOTH
Toggle the switch to ON, make sure that the keyboard is under the wireless mode:
- Hold Fn+Q/W/E for 3-5 seconds till the indicator light bar blinks fast in blue/green/red, and the keyboard is ready to pair.
- Turn on your Bluetooth device and find “Galaxy70”, then connect. When the keyboard is connected to the Bluetooth device, the indicator stops flashing and the connection is done.
- Press Fn+ Q/W/E to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHZ
- Toggle the switch to ON, the indicator light bar blinks yellow, and the keyboard is under the 2.4G mode. connect.
- Hold Fn+R for 3-5 seconds till the indicator blinks fast in yellow, and the keyboard is ready to
- Insert the 2.4G dongle into your device. When the indicator stops, the connection is done.
WIRED MODE
Toggle the switch in the OFF and plug it in.
INDICATOR LIGHT BAR / CHARGING STATUS
- Red light blinks : Low battery
- The red light stays on Charging
- Rainbow : Fully charged
Note: Charging time takes around 7.5 hours.
BATTERY CHECK
Hold Fn+Space, the keys from 1 to 0 lights up to show the battery percentage;
for example, if the keys from 1 to 6 light up when holding Fn+ Space, it means
that the battery life is currently 60%; if keys of 1-Olight up, battery life
is 100%.
SPECS
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or
type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to-
remove-and-replace-your-mechanical-keyboard-switches
Push Straight Down
- Please be gentle. Be sure the pins are aligned with the slots.
Included Tools
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically {on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note: If the key doesn’t work it’s possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
- Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email
support@epomaker.com with your purchase order
number and a detailed description of your issue.
We normally respond to inquiries within 24 hours. If you purchased your
keyboard from a distributor or not from any official store of Epomaker, please
contact them directly for any additional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker. We provide a 1-year warranty for our products when bought from our website {EPOMAKER.com). Your item will not be covered by your 1-year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.
75% Aluminum Gasket-mounted Hot-swappable RGB 2.4Ghz / Bluetooth 5.0 / Type-C Mechanical Keyboard
- Should you require more assistance please email us at support@epomaker.com.
APEX CE SPECIALISTS GMBH
Habichtweg 1 41468 Neuss Germany Contact: Wells Yan E-mail: info@apex-
ce.com
APEX CE SPECIALISTS LIMITED
89 Princess Street, Manchester, M1 4HT, UK Contact: Wells Yan E-mail: info
@apex-ce.com
Made in China
- Manufacturer: Shenzhen Changyun Technology Co., Ltd. 2 Set Sunsha born: She mating a 58 ha Road,
- Email: support@epomaker.com
- Web: www.epomaker.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>