525 Seca Analytics User Guide
- August 28, 2024
- seca
Table of Contents
525 Seca Analytics
Product Information
Specifications
- Product Name: seca analytics 115
- Compatibility: Windows 10
Product Usage Instructions
Assigning a Static IP Address on Windows 10
- Click on the Windows button and then click the settings icon or type “Network & Internet” into the search box.
- Open Network & Internet settings.
- Click on “Change Adapter Options”.
- Right-click on Ethernet and select Properties.
- Double-click on Internet Protocol, Version 4 /TCP/IPv4.
- Enter the desired IP address, subnet mask, and gateway if necessary.
- Note: Ensure the subnet mask matches the device you are connecting to.
- Note: The first three values of the IP address must match the target device, and the fourth value should differ.
FAQ
Q: Why do I need to assign a static IP address?
A: Assigning a static IP address can be necessary for establishing a stable network connection, especially in cases where specific devices need consistent IP addresses for communication.
Q: Can I use any IP address for the configuration?
A: It is recommended to use an IP address within the same subnet range as the device you are connecting to ensure proper communication.
Assign static fixed IP
- This document describes how to set up a static IP address on a Windows 10 computer.
Starting situation:
- The user wants to assign a static IP address to the PC with Seca Analytics 115 installed.
- This may be necessary to establish a network connection to an mBCA, for example.
Procedure
- Go to “Settings” (click on the Windows button and then click the settings icon.)
- (You can type “Network & Internet” directly into the search box)
- Open Network & Internet
- Click on “Change Adapter Options
- Right-click on “Ethernet” and then click on “Properties
- Double-click on “Internet Protocol, Version 4 /TCP/IPv4
- Here you can enter the IP address, subnet mask, and (if necessary) a standard gateway defined.
Define IP address and subnet mask:
- Subnetzmasks: 255.255.255.0
- (Please note that the subnet mask must be set up in the same way in the device you want to connect to.)
- IP address: e.g. 192.168.1.2
- (Please note that according to the subnet mask selected above, the first three values of the IP address must be the same for both the PC and the device you are trying to connect. The fourth value must be different.
- seca.com
Documents / Resources
| seca
525 Seca
Analytics
[pdf] User Guide
525 Seca Analytics, 525, Seca Analytics, Analytics
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>